Search
Featured Systems
Products
MaxTrak® Slotted Deflection Track
Performance that stands up to deflection
For superior head-of-wall vertical deflection, and the added benefit of horizontal drift movement, ClarkDietrich has your answer.
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Drop Ceiling Assemblies
Rigid structural support for gypsum wallboard, veneer plaster or drop ceiling assemblies
Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco &…
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
RedHeader PRO™ Rough Opening System
provides versatility for walls and ceilings contractors
Designed to replace conventional boxed headers and built-up jambs and provide better results in half the time.
BM-Clip - Barrier Mesh™ Clip
Specifically to be used when installing Barrier Mesh™ into walls and ceilings.
ClarkDietrich BM-Clips are high-strength steel components which provide secure attachment of Barrier Mesh metal panels…
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
Quicksilver™ Corner Bead (CBS)
Hot-Dipped METAL CORNER BEAD
Quicksilver™ corner bead is used to achieve outside 90° corners at an economical price point.
Splayed Corner Bead (CB12)
Superior finish and reinforcement for off-angle drywall corners
120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboard
Metal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings…
Mini-Bead™ 800 and 900
Provides superior keying for joint compound for one-coat plaster veneer systemsMini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat…
Clinch-On Dull Corner Bead (CBCO)
Premier drywall finishing bead
Clinch-On Corner Bead is recognized as the premier product for providing sturdy metal reinforcement on 90° drywall corners.
Clinch-On Hot-Dipped Corner Bead (CBCS)
Hot-dipped steel reinforcement for long-lasting, corrosion-resistant drywall corner protection
Hot-dipped corner bead provided by Clinch-On Products, Co. offers the identical roll-formed precision…
Bullnose Corner Bead (CBB)
Creates elegant, rounded outside drywall corners
Bullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Bullnose adds contemporary styling and a sense of openness…
Paper-Faced Inside Corner Bead
Provides incredibly straight and smooth inside 90° corners for drywall finishing
Rigid steel-reinforced inside corners provide a durable guide to achieve exceptionally straight and sharp inside…
Paper-Faced Inside Splayed Corner Bead
Used to create a sharp, crisp line for finishing inside off-angle or inverted splayed corners
Off-angle tape-on 120/135° inside or reverse splayed bead is used to achieve a crisp, clean, straight…
Paper-Faced Bullnose Tape-on
Creates elegant, rounded outside drywall corners adding contemporary styling and a sense of openness to any room
3/4" tape-on bullnose corner bead is used to create a smooth, rounded look to…
Paper-Faced Bullnose Nail-On
Provides elegant and contemporary rounded drywall corners and is used when nailing or mechanical fastening is desired
3/4" nail-on bullnose corner bead is used to create a smooth, rounded look to…
RC Deluxe® Resilient Channel (RCSD)
SINGLE LEG RESILIENT CHANNEL
RC Deluxe is one of the most effective, low-cost methods of improving sound transmission loss through wood and steel frame partitions.
Z-Furring Channel
Furring Channel for Walls and Ceilings
Easily accommodates rigid insulation and provides for the attachment of gypsum wallboard, veneer or plaster to the interior of masonry walls.
L-Angle / Corner Angle
L-angle / corner angle
Non-structural corner angles commonly used to connect, reinforce or secure metal stud framing in various drywall applications.
Structural L-Angle commonly used for connection…
L-Header
Preformed L-header that slides into place quickly
L-Headers are prefabricated light-gauge 90° L-sections that are used in load-bearing wall framing.
HDS® Framing System
heavy-duty framing stud for headers, jambs, posts and built-up tube truss chords and webs
The superior strength and carrying capacity of the HDS means higher performance with fewer members.
3/4" Bullnose 2-Way Inside Corner Cap
A professional finish where two bullnose corners meet at 90°
3/4" Bullnose 2-Way Inside Corner Caps provide the ideal component to transition bullnose corner beads to a crisp finish where inside…
Strait-Flex® OS-300
DESIGNED FOR SQUARE, LOW-FILL OUTSIDE 90° CORNERSDiamond-punched paper edging allows for easier feathering, faster drying, and high bonding strength, which assures even lay-down of the paper,…
Strait-Flex® IS-300
DESIGNED FOR INSIDE 90° CORNERS, WHERE LARGE FRAMING IRREGULARITIES NEED TO BE OVERCOMEIS-300 is designed for 90-degree inside corners where speed and strength are needed and/or where large framing…
Strait-Flex® OS-400
DESIGNED for outside 90° corners where large voids and irregularities occurDiamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.
Strait-Flex® Arch-Stick
composite arched corner BEAD
Designed for outside 90° arched corners, eliminating flat spots.
Strait-Flex® Big-Stick
Designed for high traffic, outside 90° corners
The easiest corner bead on the market to install and repair.
Strait-Flex® Wet-Stick
composite water-activated adhesive
Designed for outside 90° corners without the need of compound or fasteners.
Strait-Flex® Medium
Finishes INSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Medium is a high-performance drywall corner bead.
Strait-Flex® Arch-Flex
DESIGNED FOR COMPOUND ARCHES AND DOUBLE CURVE APPLICATIONS
Arch-Flex is designed for compound arches and double curve applications, including arched windows and doors, ceilings, soffits, staircases…
Strait-Flex® Gold
High-Performance Drywall Corner BeadStrait-Flex Gold is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Chamfered Corner Bead
Chamfered edge for a modern look
Designed with a 3/4" chamfered edge at the corner to provide a modern look and shadowing effect.
PRO-90 Jumbo Corner Bead
Straight, rust-proof, dent-resistant corners where a wider flange is needed.
Designed with extra wide, 1-3/4" flanges to cover two layers of 5/8" drywall.
3/4" Inside Corner Cove
3/4" radius, inside corner cove
Designed to complement the outside corners created by the bullnose corner bead.
3/4" Splayed Inside Corner Cove
3/4" radius, splayed inside corner cove
Designed to complement ClarkDietrich vinyl 3/4" bullnose splayed corner bead. Adjustable from 120° to 140° for off-angle inside corner conditions.
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
F-Bead
Covers raw edges of drywallDesigned to cover raw edges of drywall and provide a 1/2" horizontal extension.
"DX" Expansion Joint
Control cracking in large areas of wallboard
Provides stress relief and assists in the controlling of cracking across large areas of wallboard.
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
Structural Rim Track
Provide a lightweight, low-cost, rigid floor assembly
Structural track, usually in the same gauge as the joist, is used as rim or band enclosures.
UltraBead - Fire, Smoke & Sound
Vinyl L-Bead with Compressible Foam
UltraBEAD, when used in conjunction with UltraTRAK slotted deflection track or Deep Leg deflection tracks, provides joint protection up to ¾” for a 1 or 2 HR…
UltraTRAK Slotted System
Fire rated deflection assembly for interior partitions & curtain-wall framing
The UltraTRAK Slotted system utilizes a UltraTRAK slotted deflection track in conjunction with UltraBEAD …
UltraBEAD with Deep Leg Deflection Track
Fire rated deflection assembly for interior partitions & curtain-wall framing
The UltraBEAD with Deep Leg Deflection Track system utilizes a deep leg deflection track in conjunction…
Deflection Track w/ ProTRAK Liner
A vinyl sleeve insert used inside a deflection track for interior walls to break the steel-on-steel connection.
#15 Double-V Control Joint
Expanded flange control joint#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint…
#15 Zinc Double-V Control Joint
CORROSION RESISTANT EXPANDED FLANGE CONTROL JOINT#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V…
#XJ15 Double-J Control Joint
Expanded flange control joint with a taped reveal for a clean finish#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
#XJ15 Zinc Double-J Control Joint
Corrosion resistant Expanded flange control joint with a taped reveal#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
BlazeFrame Flute Cover (FC)
Flute cover (Fc) profile cover for under fluted decks
Corrugated strap for horizontal use to span fluted areas of unprotected or protected metal decks in up to 2 hr rated assemblies.
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
FAS-093X Fire Rated Control Joint
FAS-093X fire rated control joint - profile for protection of control joints
Fire Rated Control Joint is a composite control joint with intumescent tape factory applied to the back side of the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
Cornerite™
Reinforcement for inside or outside cornersCornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
#2A Expanded Corner Bead
RIGID, Expanded flange corner bead for exterior cornersA more rigid expanded corner bead for reinforcing plaster/stucco corners when used with masonry and fire proofing beads and columns. The #2A…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco
May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Adjustable Inside Corner Trim
Inside Corner Trim
Adjustable inside corner hinge with shoulders designed to keep the corner straight during installation.
PRO-90 Combi Bead
Straight to curve arches
Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.
Rip-Bead® Flat L-Bead
Cover raw edges of drywall
Designed for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.
Strait-Flex® Perfect-90°™
Finishes inside 90° and off-angle corners
Perfect-90º™ ensures a clean, sharp corner without the risk of damage from a taping knife.
Strait-Flex® Ammo-Flex
Designed for bazooka® applications
Loads into any Bazooka® for fast applications of intricate off-angles or inside 90º corners.
Strait-Flex® L-Bead
Designed to finish edges of drywall
Ideal for window returns, sky lights and wall edges.
Strait-Flex® Wet-Flex
Designed AS A WATER-ACTIVATED OUTSIDE 90° AND OUTSIDE OFF-ANGLE CORNER BEAD ON A ROLL
Water-activated adhesive on inside of roll.
Roll-Patches
continuous patch material
Continuous roll patch width allows material to be cut to any length.
Can-Patch (Residential)
Can light patch (residential)
Pre-cut 6-1/4" hole fits standard residential ceiling lights and can light receptacles.
Can-Patch (Commercial)
Can light patch (commercial)
Pre-cut 6-1/4" hole fits standard commercial ceiling lights and can light receptacles.
Strait-Flex® Tuff-Tape
Designed for strength and speed and as a paper tape replacement
Used in areas where humidity causes paper tape to fail.
Strait-Flex® Crack-Tape
Repairs persistant cracks in corners and on flat surfaces
Tested to be two times stronger than paper or mesh tapes.
Strait-Flex® Tile-Tape®
Designed for tile, marble and granite and water and mold resistant
Produces straight, strong, and water-proof inside, outside and off-angle corners.
BackerBead® with Short Flange
Casing Bead with factory applied blue backer rod
BackerBead® with Short Flange is perfect for situations where the standard 1-3/4" flange size is too large for the application. Factory-applied blue…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior…
Prefabricated Panel Edge
Designed for systems that are manufactured into panels for job installation
Includes the ClarkDietrich Keylock™ Splice for connecting multiple sections and to assist in alignment in Exterior…
Header Weeped Starter Track
Designed with front weep holes and a drip leg to move moisture away from opening headers
Supplied with a disposable protective strip to prevent clogging during base coat application.
PRO-Bull 3/4" Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
PRO-Bull 3/4" Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
#30 Corner Master™ Control Joint
Expanded flange inside corner control joint
#30 Corner Master™ Expansion/Contraction Control Joint (Double-V) is designed to provide stress relief at inside corner intersections on plaster walls.…
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
093 Zinc Control Joint (ZNCJ)
Drywall or veneer plaster control joint
ClarkDietrich 093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve the stresses of expansion and contraction of drywall and…
Zinc Control Joints #38, #50 & #75
Resists corrosion on applications of plaster and stucco
A solid flange zinc control joint that resists corrosion on interior and exterior applications of plaster and stucco. The #38, #50 & # 75…
Zinc Mini-Bead™ 800 and 900
Corner reinforcementZinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
TradeReady® Steel Joist
The premier floor joist system for both commercial and residential framing
TradeReady® steel joists are one of the primary components that make up the TradeReady® floor system. These joists feature…
3/4" Bullnose 3-Way Outside Corner Cap
Designed to finish intersections where three outside 3/4" radius bullnose corner beads meet at 90° angles
Eliminates time consuming mitering and provide the ideal solution to finish corners quickly…
3/4" Bullnose Transition Cap
Used to transition 3/4" radius bullnose corner bead to a 90° square corner for installing baseboard or crown molding
Bullnose to 90° transition caps simplify installation of baseboard or crown…
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
Bullnose Corner Bead
Used to create elegant, contemporary, rounded 90° drywall corners
Bullnose Corner Bead is used to create subtle dimension and softens the look of outside corners. PRO-Bull 3/4" also available for…
1-1/2" Bullnose Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
Bullnose Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
Bullnose Kerfed Corner Bead
Creates a rounded or bullnose paintable finish around door and window trims
Bullnose kerfed corner bead is designed with a return leg that can be inserted into the channel of door and window jambs.
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
L-Bead
Provides clean, sharp edge at wallboard terminations
L-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.
Partition End Caps
Quickly finishes doorways, knee walls and wall endsFinish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.
Metal J-Trim #400 (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfaces
Metal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal U-Trim #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is required
U-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
#66N Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
#66N Zinc Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
#1A Zinc Expanded Corner Bead
Expanded flange corner bead for exterior cornersA strong, all-purpose exterior corner bead with a solid nose and multiple general use purposes. The zinc finish provides superior corrosion resistance…
Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
Extra Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
Tile Cap
Preferred method where sink or lavatory is to be recessed
A punched metal strip attached to the front edge of the cabinet is used in some geographical areas as a screed and support for the…
TradeReady® Rim Track
Preformed tabs at standard spacings for rapid and easy installation
TradeReady® rim track is another major component of the TradeReady® steel floor system. The rim is an integral part of the system…
C-Joist
Provide a lightweight, low-cost, rigid floor assembly
C-Joist components provide an economical, lightweight alternative to open web trusses, bar joists, engineered lumber, cast-in-place or hollow…
TRAKLOC® Drywall Framing System
Telescopes in length to deal with variances during installationTRAKLOC® allows you to order one length member and “adjust” the length accordingly to make up for variances in the slab. The two-piece…
Strait-Flex® Butt-Tape
Designed for fast, flat, butt-jointsVertical and horizontal butt-joints and commercial “Top-Out” applications.
103 Deluxe® Corner Bead (CBU)
Dull-Finish Metal Corner BeadClarkDietrich 103 Deluxe® corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is…
PRO-90 Corner Bead
Impact-resistant vinyl corner reinforcementPRO-90 Corner Bead is an extra rigid vinyl corner bead designed for stiffness and strength. A slight radius on the nose makes for easy, smooth finishing.
PRO-Bull 3/4" Corner Bead
Used to create elegant, contemporary, rounded 90° drywall cornersPRO-Bull 3/4" radius bullnose provides soft, rounded aesthetic to outside corners.
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
PRO-90 Archway
Used to finish arches, curvatures and most radius conditionsPRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius…
Strait-Flex® Original
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Original is a versatile, multi-purpose drywall corner bead available in 100 ft. rolls.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Strait-Flex Wide-Flex
FINISHES INSIDE AND outside 90° AND OFF-ANGLE CORNERSStrait-Flex Wide-Flex is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-…
Perma-Patch
multi-purpose drywall patchPerma-Patch quickly repairs doorknob damage to drywall and is ideal for mis-cut or relocation of receptacles, ceiling and can lights.
093 Vinyl Control Joint
Used to relieve expansion and contraction stresses093 Control Joint provides stress relief and assists in controlling cracking in large areas of wallboard.
PRO-Bull 3/4" Archway
For finishing arches, curvatures and most radii with a rounded bullnose look3/4" radius bullnose corner bead (VBAB) designed with slotted flange that easily forms to curves and arches with a soft,…
#66X Zinc Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
#66X Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
BlazeFrame® Perimeter L-Bead
VINYL L-Bead with Compressible FoamCreates an easy attachment that is attained with staples through the bead flange.
Colored Vinyl
Color LeadershipIn addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Strait-Flex® Uno-Bead 222
DESIGNED FOR replacing or repairing metal corner beadUno-Bead222 is Ideal for drywall, thin-coat plaster applications.
PanelTRAK
Steel Track for direct web bearingPanelTRAK is a structural steel track that allows steel studs to bear directly on the track web rather than the radii of the track corners. Because…
BackerBead® with E-Flange™
Combination PVC Casing Bead with built-in closed cell backer rodFactory-applied, closed-cell backer rod provides a sealed separation gap 1/4" wide where stucco abuts dissimilar materials such as the…
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standardsMiter cuts are made with precision to ensure proper fit at all connections.
Original BackerBead®
Combination PVC Casing Bead with built-in closed cell backer rodEliminates the need to install a backer rod separately, as the product features a factory-applied backer rod that is affixed to the…
West Coast Corner Bead (DWCB)
West coast Corner BeadClarkDietrich west coast corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is nailed,…
Extension Pole
Firberglass and aluminum poleExtension pole for painters, drywall contractors and moving companies.
Flex-Folder
hand-held tape folderSpeeds the folding of all flexible composite corner beads to correct installation angles.
Inside Rolling Tools
For use with all inside corner productsSpecifically designed to speed application time of inside corner applications.
Mud-Pro 2
compound applicatorMud-Pro2 is the fastest, cleanest, and most durable compound applicator on the market. Designed to apply precise amount of compound to inside and outside 90 corner beads…
Outside Rolling Tools
Speeds application time for outside corner productsSquares up cornerbeads on walls.
Super-Bond
drywall compound additiveA joint compound additive ensuring maximum bonding of tapes with drywall.
#1A Expanded Corner Bead
GALVANIZED STEEL Expanded flange corner bead for exterior cornersA solid nose, all-purpose exterior corner bead. Strong and economical with multiple general use purposes.
Drywall Shims
Used for floating butt-joints, framing irregularities, hanging door jambs and cabinetsShims save time by shimming drywall to allow greater inset at joints.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
#36 Sill Screed
Exterior Foundation sill screedA variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Paper-Faced Splayed Corner Bead (CD1-O)
High-performance off-angle tape-on bead is ideal for finishing 120°/135° offset cornersOff-angle tape-on bead, also known as splayed or 120/135° corner bead, is used to provide a strong, smooth…
Paper-Faced Bullnose Splayed Tape-on (CD1-OBN)
Provides rounded 120°–135° outside drywall corners for a contemporary "modern" lookOff-angle bullnose tape-on bead, also known as splayed bullnose or 120/135° bullnose corner bead is used to provide…
Paper-Faced Corner Bead
Lowering Labor Costs by removing one coat of compoundPaper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective,…
Paper-Faced Inside Bullnose Corner (CD2-B)
Creates subtle, smooth, inside bullnose cornersTape-on inside bullnose 90° paper-faced corner bead provides subtle, rounded inside corners.
MEP Gusset Plate
ReSTORES structural integrity of steel framing with field modified openingsThe MEP Gusset Plate is designed to provide strength and stiffness to framing members that are modified or field cut at the…
BlazeFrame® Shield
33mil, 43mil or 54mil Fire Shield SystemClarkDietrich’s BlazeFrame Shield is specifically designed for use in conjunction with approved fireblocking materials per section 718 of the IBC.
Commercial Strapping
Multipurpose pre-punched commercial coil stock used for bracing, bridging or tension strapping
Coil Strapping is made in a variety of widths, each with a unique layout of pre-punched holes…
Flat Strapping
Multipurpose flat stock used for bracing, bridging or tension strapping
Flat Strapping is made in a variety of widths and thicknesses to meet different application requirements.
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trussesKatz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
Spazzer® 5400 Spacing and Bridging Bar
Facilitates the rapid erection of structural wall framing
ClarkDietrich TradeReady® Spazzer® 5400 spacer bar is a pre-notched, 16-gauge or 18-gauge, galvanized steel spacer and bridging bar,…
Spazzer® 9200 Spacing and Bridging Bar (SPZD)
Facilitates the rapid erection of interior, nonload-bearing studs
Prenotched bridging and spacing bar.
Spazzer® Snap-In Grommet (SPGR)
used to secure the Spazzer® barThe Spazzer® Snap-In Grommet should be used to secure the Spazzer bar when used in load-bearing applications
2x6 FR Blocking
PreCut Fire-retardant treated wood blockingThe 2x6 FR Blocking is precut with a dado groove to latch on to flange of nonstructural steel framing and span between wall partitions to provide…
Backer Bar
Quick, Easy InstallationThe Backer Bar was specifically designed to meet the demand for the attachment of multiple items and heavier items to interior partitions. Provides superior connection shear…
Danback® Flexible Wood Backing
REDUCE STEEL STUD BACKING Labor costs BY UP TO 75%Danback® Flexible Wood Backing System, featuring D-Blaze® or FlamePRO® fire-retardant treated wood (FRT), has made wood backing installation easy and…
FastBack® Backing System (FBBC)
Universal design-Works with studs in either direction
The FastBack backing system features a universal design that works with studs in either direction—concealing fasteners on the face of the…
Notched Track
Notched track for blocking & backingNotched Track is generally used for joist blocking or horizontal backing in walls to allow support for cabinets, appliances etc.
EasyClip™ Quick Twist Web Stiffener
Provide reinforcement at critical load points to prevent web crippling
(QTWS) EasyClip™ Quick Twist Web Stiffeners are used to provide reinforcement of joist webs to prevent crippling.
TradeReady® Structural Bridging (TDSB)
Provides a quick and efficient method to prevent joist rotation
TradeReady® structural blocking is the third component of the TradeReady® steel floor system. Structural blocking is pre-cut to fit…
Custom Fabricated Clips & Connectors
Custom connectors, clips or supports fabricated to your exact specificationsClarkDietrich can custom fabricate just about any shape, bend, angle or specialty framing clip, connector or support to…
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
360TRAK™
Interior Nonload-Bearing Flexible Track360TRAK™ is a flexible framing product that is a high-performance solution for creating intricate curves, bends, and variable radii for dramatic and…
Aluminum Burn Clip (AB)
Clips melt away under intense heat, allowing a fire-damaged structure to collapse, while keeping the firewall barrier in place to protect the adjacent unitsThe clips are used to hold the area…
ClarkDietrich Sound Clip™ (CDSC)
Sound isolation and dampening clipUsed to fasten gypsum wallboard in various wall and floor to ceiling applications, while simultaneously providing acoustical separation.
Grommets
Grommets for Steel Wall Stud FramingGrommets protect and isolate electrical wiring and plumbing from contacting metal.
Hanger Wire & Tie Wire
Hanger Wire & Tie WireWire support for drop ceiling assemblies
Metal Furring Channel Clips (MFCC)
Quickly facilitates the attachment of metal furring channel to 1-1/2" U-channel in ceiling assembliesMetal Furring Channel Clips are made of galvanized wire and used to attach Metal Furring Channels…
Panel Lift Clip (PLC)
PROVIDES LIFTING POINTS FOR PREFABRICATED PANELSThe ClarkDietrich Panel Lift Clip is load rated and is used to safely lift wall panels at assembly warehouses or on job-sites. The clip…
"L" and "T" Strap Ties
"l" and "T" strap tiesEconomical braces are ideal for gates, patio covers, joining posts and columns to headers, beams and other applications where added reinforcement is needed.
Framing Angles
light and medium framing anglesCDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints).
Gusset Clips
GUSSET CLIPSA one-piece design provides 3-way connection (top-bottom-side) for a variety of applications.
Light and Medium Framing Angle
Light and Medium Framing AngleCDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints).
Light Straps (CDLS Series)
Light STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Medium Clip Angle
Medium clip angle12 gauge angles used to attach back-to-back installation.
Medium Straps (CDLMS Series)
Medium STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Mending Tie Plate
MENDING TIE PLATESVersatile and easy-to-use mending plates for wood-to-wood connections.
Nail Plates
nail PLATESNail Plates are used for attaching wooden members together in a non-structural connection.
Nail Stop Plates
nail stop PLATESDesigned to prevent nails from piercing and damaging mechanical, electrical and plumbing pipes and lines.
Rolled Straps
rolled STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Steel Plywood/Sheathing Clip
steel plywood / sheathing clipFast and easy - just slip over the sheathing edge. Eliminates unreliable wood blocking.
Straps (CDMS Series)
STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Tie Plate Anchor Series (CDTPA)
TIE PLATE ANCHOR SERIESThe CDTPA Anchor Series is manufactured to resist uplift of the top plate(s) of solid sawn or structural composite lumber wall members from solid sawn or structural composite…
Twist Straps (CDLST Series)
TWIST STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Fence Brackets
fence bracketsProvides a secure fit for the connection of 2 x 4 fence boards to post.
Adjustable Strap Hangers
ADJUSTABLE STRAP HANGERSThe hanger’s long straps can be field formed to the required height of the carried member.
Light Duty Face-Mount Hangers
light duty face-mount hangersProngs secure CDLTH hangers to header for fast, easy nailing.
Angle Casing Beads
Terminates stucco and plaster against doors, windows and other dissimilar materialsProvides a tapered transition.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Archmaker™ Casing Bead
Designed to easily conform to most arched and curved designsWorks for curved bands on walls as well.
Archmaker™ Corner Bead
Provides true, uniform, curved, or arched reinforcementConforms to most arched and curved designs.
Archmaker™ Drip Flashing - 2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
BackerBead® Drip Flashing - 3-1/2" Flange
Drip flashing with built-in closed cell backer rodBackerBead® Drip Flashing - 3-1/2" Flange is designed to provide positive drainage above exterior window and door openings while also providing a…
BackerBead® with Rip-Bead®
1/4" removable leg provides a clean, stucco-free caulk gapAssures efficient caulk seal for optimal moisture protection.
Bullnose Archmaker™ Corner Bead
True, uniform, curved, or arched corner reinforcement with a bullnose design.Conforms to most arched and curved designs.
Bullnose Corner Bead
3/4" radius bullnose provides hard-to-damage, rust-proof cornersDesigned for use in high-traffic areas.
Bullnose X Corner Beads
3/4" radius bullnose corner bead that includes a shorter 1-1/2" flange for narrow returnsDesigned for use in high-traffic areas.
Casing Bead with Reveal
Designed to terminate stucco and plasterAt window or door openings to create a reveal.
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS Muddable J-Bead
Designed to cover the raw edges of drywall boardFor use in Direct-Applied Exterior Finish Systems (DEFS).
DEFS Starter Strip / Casing Bead
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)Standard DEFS base support starter strip or as a perimeter casing bead. Two rows of large perforations…
DEFS Starter Strip / Casing Bead with Drip
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS) The drip leg assists in moving moisture away from the opening or the foundation walls.
DEFS Starter Strip with Drip and Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS) The drip leg assists in directing moisture away from the opening or the foundation walls.
DEFS Starter Strip with Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)Standard DEFS base support starter strip or as a perimeter casing bead with weep holes to direct…
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combinedTo assist with moving moisture away from the wall.
DS15 Drip
Used with drip screed and as drip in special conditionsSuch as soffits, balconies, etc.
E-Corner Bead
Fully Embedded Corner BeadProvides reinforcement like welded-wire or woven wire laths.
E-Flange™ Bandmaker™ Casing Bead
PVC CASING BEAD WITH EMBEDDABLE FLANGE DESIGNE-Flange Bandmaker™ Casing Bead is designed with a reinforcing rib to assist in keying heavy material fills when "bands" are used in architectural designs…
E-Flange™ Casing Bead
Designed to terminate stucco and plaster against doors, windows and dissimilar materialsImproves stucco embedment by more than 80% versus standard "flat flange" products.
E-Flange™ Casing Bead with Drip
E-FLANGE™ CASING BEAD with dripPVC Casing Bead with embeddable flange design designed to terminate stucco and plaster with a moisture trap. ClarkDietrich E-Flange embeddable stucco profiles provide…
CI Weep Track
Directs water drainageDesigned to be used with #1 Corner Bead around windows and doors and at the foundation line.
Connector Clips (for Channel Reveals)
Designed to be used with channel reveals as a base for sealantsAnd to assist in alignment.
Connector Clips (for Control Joints)
Designed to assist in the alignment of control jointsAnd to provide a base for caulking.
Control Joint
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilingsFlat flange for thinner, 1-Coat applications.
Control Joint and Reveal Combinations
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilingsAlso creating 1/4" to 1-1/2" reveal in Stucco.
Control Joint with Removable Tape
Recommended for smooth finishesRemovable tape protects the deep "V" groove during construction. J-hooks on the ground helps reduce the effect of plaster shrinkage.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside cornersParts come preassembled, and may require field alignment.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside cornersParts come preassembled, and may require field alignment.
DEFS "F" Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings at the juncture of dissimilar materials. The removable…
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openingsUsed as a backing for perimeter sealant application.
DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
"F" Control Joint (with removable tape)
Recommended for smooth finishesRemovable tape protects deep "V" expansion slot during construction.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
Double Shear Face-Mount Hangers - CDLDS
double shear face-mount hangersDouble shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation.
Double Shear Face-Mount Hangers - CDMDS
double shear face-mount hangers - CDMDSDouble shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation.
Heavy Duty Joist and Truss Hangers
heavy duty joist and truss hangersCDAGUS universal face-mount hanger is designed for wood plate trusses and heavily loaded members.
Light Truss End/Hip Jack Hanger
light truss end/hip jack hangerThe CDLEHJ accommodates an end jack and a right or left hip jack.
Medium Duty Joist and Truss Hangers
medium duty joist and truss hangersCDAHU is a face-mount hanger designed for wood plate trusses and heavily loaded members with a 2-3/4" seat dimension.
Purlin Hangers
purlin hangersDesigned specifically for agricultural and post-frame use with superior performance and easy installation.
Hurricane Anchor Clips
HURRICANE ANCHOR CLIPSThe CDHTHA anchor series is manufactured to attach metal plate connected trusses, framing members and wall members, made of solid sawn or structural composite lumber; to solid…
Hurricane Tie (CDHT1, 10A, 10S)
HURRICANE tieDesigned to hold trusses on both sides to transfer uplift loads from roof framing members to the wall studs.
Hurricane Tie (CDHT2A, 2.5A, 2.5T, 3)
HURRICANE tieUsed as a connection between truss/rafters and walls to resist lateral and uplift conditions.
Hurricane Tie (CDHT6, 8)
HURRICANE tieUsed as a connection between truss/rafters and walls to resist lateral and uplift conditions.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
Fast Top™ Clip (FTC)
Used in head-of-wall deflection conditions for exterior curtain wall and interior, nonload-bearing walls
ClarkDietrich Fast Top™ Clips are used in head-of-wall deflection conditions for in-fill…
FastClip™ Slide Clips (FCSC)
Provide for vertical building movement up to 3"ClarkDietrich FastClip™ Slide Clip deflection clips are used to attach exterior curtain-wall studs to the building structure and provide for …
Fast Strut™ (FS12, FS15, FS18, FS20, FS22, FS24)
Used for large standoff conditionsClarkDietrich Fast Strut™ curtain-wall connector employs the Fast Clip™ technology for curtain-wall stud attachment and is commonly used when large stand-off…
Flat Tail™ Slide Clip (FTSC)
Allows for vertical building movement and provides a horizontal standoff
ClarkDietrich Flat Tail™ Slide Clip is used to attach exterior curtain-wall studs to the building structure and provide for 2…
Universal Bypass Clips (UBC)
Provides either a rigid connection OR vertical building movement up to 3”.
Universal Bypass Clips are used to attach exterior curtain wall studs to the building structure and provide either a rigid…
Fixed Universal Slip Clip (FUS)
10 and 12 Gauge FIXED universal slip clipIdeal for medium to larger standoff conditions.
Drift Headed Rail (DHR97) and Drift Clips (DRC)
2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONS for cast-in-placeClarkDietrich Drift Headed Rail (DHR-97) and Drift Clip 97 mils or 68mils (12ga or 14ga) is a uniquely designed two-piece…
EXTENDED FastClip™ (FCEC)
Provides for vertical building movement up to 3” and is commonly used for large standoff conditions
EXTENDED FastClip™ Slide Clip™ (FCEC) 68mils (14ga) deflection clips (8" clip is available in…
FastClip™ Slide Clip (FCSC-HD) w/Anchor Holes
Vertical building movement up to 3"ClarkDietrich FCSC-HD 68mils (14ga) is used to attach exterior curtain-wall studs to the building concrete structure and provide for vertical building movement…
Universal Header Hanger (H-Series)
used to connect box headers to jambs or beams to columns
The H-Series™ Universal Header Hanger is used to connect box headers to jambs or beams to columns and transfer large vertical loads.
Box Header Clip
Pre-punched Clip for box header Framing
The Box Header Clip (BHC) is designed to eliminate field cutting metal track into sections. The BHC clip is pre-punched to promote a quick and accurate…
Header Cripple Stud Clip
Eliminates the header track material and is a more economical alternative
HDSC Header Bracket
Header Clip for RedHeader PRO™ and HDS Framing Systems
The HDSC Header Bracket (HDSC) is the perfect complement to the RedHeader PRO™ and HDS® Framing system. This simple, yet innovative header…
CD Holdown
SECURE AND HOLD DOWN SHEAR WALLS TO THE STRUCTURE FOUNDATION
ClarkDietrich holdowns provide cost-effective shearwall attachment and are used to transfer tension loads between floors or from…
ClarkDietrich Moment Clip (MC Series)
Moment connection for knee walls and shear walls to the structure foundation.
ClarkDietrich moment clips are high-performance, cost effective solutions for knee wall-to-foundation connections and…
EasyClip™ D & T-Series™ Anchor Clips
Provide cost effective tie-down solutions for knee walls, shear walls and truss connectionsThe EasyClip™ D-Series™ & T-Series™ Anchor Clips are high-performance, cost effective solutions for knee…
EasyClip™ A-Series™ End Clip
Used in knee wall connections or to reinforce jamb stud connections at the primary frame
EasyClip™ A-Series™ End Clips are most commonly used to reinforce connections in knee-wall applications or to…
Holdown Plate (HDP)
SECURE AND HOLD DOWN structural steel endposts between floors or TO THE FOUNDATIONClarkDietrich HDP holdown plates provide cost-effective shearwall attachment and are used to transfer tension loads…
Extended SwiftClip™ LE-Series
USED In rigid attachments of wall studs to the structureClarkDietrich’s Extended SwiftClip™ LE-Series rigid framing clip is used to attach exterior wall studs to the structure of the building.
Extended Uni-Clip™ (UXRC)
14 Gauge Rigid Connection ClipClarkDietrich’s Extended Uni-Clip™ rigid framing clip is used to attach exterior wall studs to the structure of the building.
Extended Uni-Clip™ (UXRC6-HD) w/Anchor Holes
connects exterior studs to the primary structure of the building, while resisting horizontal and vertical loadsClarkDietrich’s UXRC6-HD 68mils (14ga) rigid framing clip is used to attach exterior…
Bridging Termination Clip (BTC3,BTC4,BTC6)
U-Channel Lateral Bracing ClipThe ClarkDietrich Bridging Termination clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural wall studs when used in load-bearing or curtain wall…
CC33 3/4" Channel Clip
33mil (20 Gauge) Lateral Bracing Clip used to secure 3/4" U-Channel to drywall studsThe ClarkDietrich CC33 clip is used to secure U-Channel or Cold Rolled Channel (CRC) to non-structural wall studs.
FastBridge™ Clip (FB33, FB43 & FB68)
Used to secure u-channel to wall studs for lateral bracing
The ClarkDietrich FastBridge™ clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural or non-structural wall studs when…
Spazzer® Bar Fly Clip (SFLY)
Eliminates the need for cutting and bending when using the Spazzer® 5400 Spacer Bar to facilitate rapid installation of exterior curtain wall framing
The Spazzer bar fly clip is a secure, fast and…
Spazzer® Bar Guard™ (SPBG)
Used to secure the Spazzer bar when used in load-bearing applicationsThe Spazzer Bar Guard™ retainer clip is used to secure the Spazzer bar when used in load-bearing applications.
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrierThis is not a flashing; it is intended for use in combination with…
Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legsSloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture away…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combinedPre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combinedUsed to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizesPerimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been engineered…
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing beadFor use in Exterior Insulation and Finish Systems (EIFS).
Straight and Mitered Connector Clips (for Soffit Vents)
Assists in the alignment of soffit ventsConnects multiple sections.
Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front sideDesigned with weep holes on the front side to move moisture away from openings in Exterior…
Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back sideDesigned with weep holes on the back side to move moisture away from openings in Exterior…
Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip legDesigned with weep holes on the front side and a drip leg to move moisture away…
Starter Strip / Casing Bead
Heavy-duty, base support starter strips and perimeter casing beadsFor Exterior Insulation Finish Systems (EIFS), the perforated flanges allow the base coat mixture to easily flow through and bond to…
Standard Corner Bead
Provides hard-to-damage, rust-proof, and straight cornersOpen triangles on the flanges allow for full embedment.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Wide Flange Corner Bead
Wide Flange Corner reinforcementWide Flange Corner Bead is designed for deep fills, irregular corners, and for use in conditions, requiring two layers of 5/8" drywall.
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Weeped Starter Track
One-piece support starter track designed with weep holes and an extended drip legMoves moisture away from opening headers in Exterior Insulation Finish Systems (EIFS).
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
E-Flange™ Control Joint
PVC Control Joint with Embeddable Flange designDesigned to relieve stress and assist in controlling cracking in large areas of walls and ceilings. Specially designed connector clips are provided for…
Load Share Clip (CDLSC)
LOAD SHARE CLIPThe CDLSC load share clip series is manufactured to transfer loads between two truss or framing ply members made of solid sawn or structural composite lumber.
Truss Spacer / Bracer
TRUSS SPACER / BRACERThe Truss Spacer/Bracer is used for lateral bracing and spacing of trusses 24 inches on center.
TradeReady® Floor Joist Blocking
Quick and efficient system that prevents joist rotation and accommodates mechanical passing
TradeReady Floor Joist Blocking is one of the primary components that make up the TradeReady floor bracing…
EasyClip™ E-Series™ Support Clip
Feature a long leg to accommodate greater standoff for rigid connections.
EasyClip™ E-Series™ Support Clips are used for rigid stand-off connections.
SwiftClip™ 150 x 300 LE-Series
SwiftClip™ 1-1/2" x 3" (LE-Series)
1-1/2” leg x 3” leg fixed/rigid connection clip
SwiftClip support clips are used in multiple construction projects, specifically in conjunction with structural…
Bridle Hanger (CDBV, CDMB)
for attaching floor joists to structural steel beams or wood ledgers
Bridle Hangers are commonly used to attach light-gauge C-joists to structural steel beams or wood ledgers.
Uni-Clip™ End Clip (UCEC)
14 Gauge rigid connection clip
ClarkDietrich’s Uni-Clip™ framing clip is a universal framing clip used to attach and support numerous rigid framing conditions.
SwiftClip™ 300 x 300 LA-Series Support Clip
SwiftClip™ 3" x 3" (LA-Series)
Pre-punched SwiftClips™ are used for multiple construction applications. 3" leg x 3" leg clips are commonly used for floor joist hangers and truss connections.
TradeReady® Rim Track Splice Plate (TDSP)
Ideal for splicing rim joist and is easily field skewable for off-angle rim joist connections
The Field Skewable TradeReady® Rim Track Splice Plate provides an easy and efficient method for splicing…
Skewable Angle
FOR RIGID AND OFF-ANGLE ATTACHMENTS OF JOIST-TO-JOIST, JOIST-TO-HIP BEAM, OR TO OTHER STRUCTURAL STEEL MEMBERS
ClarkDietrich Skewable Angles are used to make rigid attachments of joist-to- joist or…
Seismic and Hurricane Ties (HC2, HC2A, HC2.5, HC3)
ATTACHES AND secures TRUSSES AND RAFTERS TO BUILDING STRUCTURE
ClarkDietrich Seismic and Hurricane Ties are designed to provide wind and seismic resistance for trusses and rafters.
Universal Joist Hanger (UJH)
Floor joists connection to structural steel beams or CFS headersThe Universal Joist Hangers (UJH) are used to connect joists to CFS headers and steel I-beams.
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfacesClips are provided for alignment and as a base for sealants.
EasyClip™ S-Series™ Support Clip
Are used to secure U-channel (cold-rolled channel) to framing members for lateral bridging and for miscellaneous rigid connections.
This high-performance, multi-use utility clip is ideal for corner…
EasyClip™ U-Series™ Clip Angles
used to Secure U-channel to wall studs for lateral bridging
EasyClip™ U-Series™ Clip Angles are used to secure U-channel to wall studs for lateral bridging or for miscellaneous rigid connections.
EasyClip™ X-Series™ Clip Angles
Used to secure U-channel to wall studs for lateral bridgingEasyClip™ X-Series™ Clip Angles have extra long legs (2" x 2") and are used to secure U-channel to wall studs for lateral bridging.
SwiftClip™ 150 x 150 LS-Series
SwiftClip™ 1-1/2" x 1-1/2" (LS-Series)
1-1/2" leg x 1-1/2" leg fixed/ridged connection clip.
SwiftClip L-Series support clips are used in multiple construction projects, specifically in conjunction…
Drift Head-of-Wall (DHOW)
Head-of-wall drift and deflection for exterior curtain wall and interior, nonload-bearing wallsClarkDietrich Drift Head-of-wall clips are used in deflection conditions for in-fill curtain wall…
Drift FastClip™ Slide Clip (D-FCSC)
Vertical and lateral building movement up to 2"
ClarkDietrich Drift FastClip™ Slide Clips 68mils (14ga) or 97mils (12ga) are used to attach exterior curtain-wall studs to the building structure and…
Drift Rail (DR97) and Clip (DRC)
UNIVERSAL 2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONSClarkDietrich Drift Rail 97mil (12ga) and Clip 97 mil or 68mil (12ga or 14ga) is a uniquely designed two-piece system that is used…
ClarkDietrich Area Separation Wall Systems
Non-load bearing, 2-hour and 3-hour rated vertical wall assembliesThey provide fire-resistant protection between adjacent living units in apartment buildings, condominiums and townhouses.
Pony Wall
Partial wall framing connection to floorThe ClarkDietrich Pony Wall is intended to support out-of-plane loading of cantilevered partial wall systems that are unsupported at the top track.
Double Flange Step Bead
Finish from the ground on both sides of the bandThe grounds on both sides act as a guide for finishing smooth transitions. Perforated flanges allow for more secure attachment.
BM 66 Series 1-Piece Bandmaker™
Provides a one-piece band, saving labor timeAdditional band widths available.
Archmaker™ / Bandmaker™ Casing Bead
Designed to easily conform to most arched and curved designsWith a reinforcing rib to assist in keying heavy material fills.
Drum Channel Reveal (with perforated flanges)
Creates narrow 1/4" reveals in stucco and plaster surfaces
ClarkDietrich Shaftwall Systems
Fully tested and approved assemblies for shaftwall constructionProvides maximum flexibility to choose from a variety of board manufacturers.
Gusset Plates (G-Series & GP-Series)
Punched Or Unpunched Gusset Plates
Gusset plates for easier and faster attachments of X-Bracing or roof framing
EIFS/DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Furring Channel / Hat Channel
Furring Channel for Walls and CeilingsEconomical hat-shaped framing component used to “furr” out ceilings and masonry walls.
Mid Wall Lap Siding Transition Weep Screed
Creates Transition to Lap SidingThe mid-wall weep screed is designed to create a transition from stucco to lap siding while providing the necessary starting "offset" required for lap siding.
Structa Wire Project Photo Gallery
Structa Wire products have been used on countless buildings over the years.If you have just completed a project, please send us photos and details at info@clarkdietrich.com and we will share your…
Post Caps
Post CapsOne-piece designed post cap with no spot welds as possible weak points. Acts as both a post cap and post base
Adjustable Anchors
Post Base with Adjustable AnchorThe fully adjustable post base with stand-off plate secures wood posts to concrete surfaces in new or remodeling applications where damp rot is a problem. The 1…
Post Beam Caps
Post Beam CapsThe post beam cap secures wood posts to a wood beam. Eliminates the need for toe-nailing a wood beam to a post or column.
Deck Anchors
Deck AnchorThe deck anchor post base secures wood posts to a wood supporting member. Eliminates the need for toe-nailing of the post or column.
Strait-Flex® Mid-Flex
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Mid-Flex is a muddable, paper-faced composite, flexible corner bead that adjusts to any angle to create perfect inside and outside 90…
Barrier Mesh for Security
High-strength expanded metal mesh for walls and ceilingsBarrier Mesh™ is a tough, rigid, heavy-gauge steel mesh installed typically onto stud framing (both metal and wood), with gypsum sheathing…
Structalath III
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Twin Trac
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
V Truss - Walls & Ceilings
wall & ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Weep Screed for Rainscreen (DFL78-RS6-H)
Designed to be used at the bottom of entangled mesh rainscreens.
BlazeFrame Tape
Self Adhering Intumescent TapeA 2mm thickness of cured intumescent material that can be adhered to metal profiles to provide an air and smoke seal.
GhostBead Square Corner Bead (GBS)
ghostBead Square Corner Bead seamlessly blends with joint compoundClarkDietrich GhostBead corner bead uses a white surface treatment to blend in with joint compound. This traditional drywall…
GhostBead Bullnose Corner Bead - GBB
ghostbead bullnose corner bead seamlessly blends with joint compoundClarkDietrich GhostBead Bullnose corner bead uses a white surface treatment to blend in with joint compound. and create a smooth,…
BlazeFrame® (ODSL 2)
BLAZEFRAME (ODSL 2) offset deep legProfile with two slotted lower legs with firestop on both sides. Composite Firestop Deflection Track System with "offset step" accommodates fireproofing up to…
BlazeFrame® (SL 1)
BLAZEFRAME (SL 1) SLOTTED one SIDEProfile with one slotted leg and one solid leg w/ firestop on slotted side. Composite Firestop Deflection Track System for use in fire rated wall assemblies.…
BlazeFrame® RipTRAK™
head-of-wall deflection track - 1 & 2 hour systemBlazeFrame RipTRAK is a deflection track with an offset shoulder that represents the thickness of the gypsum board (5/8" or 1-1/4”). A second…
BlazeFrame® RipTRAK™ Shaftwall
head-of-wall deflection track - 1 & 2 hour systemBlazeFrame RipTRAK Shaftwall is a ceiling runner with an offset shoulder that represents the thickness of the wall material (5/8"…
BlazeFrame® (DL 1)
BLAZEFRAME (DL 1) deep legProfile with two solid legs w/ firestop on one side. Composite Firestop Deflection Track System for use in fire rated wall assemblies. Two solid legs supporting “free…
BlazeFrame® (DL 2)
BLAZEFRAME (DL 2) deep legProfile with two solid legs with firestop on both sides. Composite Firestop Deflection Track System for use in fire-rated wall assemblies. Two solid legs supporting “…
BlazeFrame® (DSL 2)
BLAZEFRAME (DSL 2) SLOTTED BOTH SIDESProfile with two slotted legs w/ firestop on both sides. Composite Firestop Deflection Track System for use in fire rated wall assemblies. Legs with slots…
BlazeFrame® (JR 1)
BLAZEFRAME (JR 1) Shaftwall deep legProfile with two solid legs with fire stop on one side. Composite Firestop Deflection Track System for use in up to 2 hr rated shaft wall assemblies. One leg…
BlazeFrame® (ODL 2)
BLAZEFRAME (ODL 2) offset deep legProfile with two solid legs with firestop on both sides. Composite Firestop Deflection Track System with "offset step" accommodates fireproofing up to 1-1/2"…
Structural Studs
ClarkDietrich Cold-Formed Steel C-Studs (C-Series™)Cold-Formed / Light-Gauge C-shaped framing members for axial load-bearing walls, curtain walls, tall interior partitions, floor joists and roof…
Structural Track
ClarkDietrich Cold-Formed Steel TrackU-shaped channel runners used as the top and bottom tracks to secure wall studs or end support closures for floor joist framing. Structural Steel Track can be…
Outlet-Patch
electrical outlet patchOutlet-Patch repairs and reinforces mis-cuts or damaged areas around receptacle boxes.
RC-1 ProPlus™ Resilient Channel (RCUR Heavy)
HEAVY-DUTY SINGLE-LEG RESILIENT CHANNELMade of 22mil steel to provide a stiffer resilient channel.
RC-2 ProPlus™ Resilient Channel (RCDE)
HEAVY-DUTY DOUBLE-LEG RESILIENT CHANNELMade of 22mil steel to provide a stiffer resilient channel.
Head-Patch
sprinkler head patch, standard and flush stylePre-cut to fit standard sprinkler head safety caps.
Paper-Faced L-Trim (CDL)
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
U-Channel (CRC)
Traditional cold-rolled Channel (CRC) for bridging
ClarkDietrich U-Channel or Cold Rolled Channel (CRC) are one of the most common bridging methods used to provide resistance to stud rotation and…
RC-1 Pro™ Resilient Channel (RCUR)
SINGLE-LEG RESILIENT CHANNELEffective, low-cost methods of improving sound transmission loss through wood and steel frame partitions.
RC-2 Pro™ Resilient Channel (RCDN)
DOUBLE-LEG RESILIENT CHANNELLow-cost methods of improving sound transmission loss through wood and steel frame partitions and ceilings.
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Foundation Weep Screed
Moisture removal from stuccoActs as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Inside Control Joint (with removable tape)
Designed to relieve stress caused by expansion and contractionIn wall and ceiling inside angles.
E-Screen (Drainage Mat)
Rainscreen Drainage MatClarkDietrich E-Screen can be used in stucco, stone veneer, brick, or under various siding installations to provide an effective method for drainage and ventilation in the wall…
Inside Corner Control Joint
Used to straighten an inside cornerFor a neat, straight edge.
Irregular Leg Corner Bead
Provides damage-resistant, rust-proof, and straight cornersDesigned with a shorter, 1-1/2" flange for narrow returns.
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
Strait-Flex® X-Crack
Framing AlignmentEliminates ceiling cracks and straightens uneven framing.
Structa Fusion
One Coat lath reinforcingStructa Fusion One Coat is an alternate to 20 gauge woven wire for One-Coat stucco applications. Fusion combines expanded metal with welded wires to create unique patented…
ProSTUD® Drywall Framing System
Steel Drywall Studs with smart edge™ technologyProSTUD Drywall Framing System (ProSTUD® and ProTRAK®) with Smart Edge™ Technology is the innovative steel drywall stud that sets a new industry…
Deep Leg Deflection Track System
Traditional, single-track deflection assembly for interior partitions & curtain-wall framing
This traditional assembly accommodates the deflection of the building structure at the head of…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stuccoThe DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
Positive Drain Weep Screed
Designed to provide a flashing transitionFrom stucco, siding, stone over a brick ledge, at a wall transition.
Drip Casing
Drip leg directs moisture away from openings and foundation wallsDesigned to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be…
Casing Bead / Plaster Stop
Used to neatly terminate stucco and plasterTerminates stucco and plaster against windows, doors and other dissimilar materials.
Bandmaker™ Series Casing Bead
Designed with a reinforcing ribAssists in keying heavy material fills when bands are used in architectural designs.
V-Truss Corner
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Mid Wall Weep Screed - M Style
Screed with built-in control jointAccomodates expansion/contraction of the separate substrates.
Pro-Flex 300
Finishes inside 90° and off-angle cornersPro-Flex300 is a muddable, PVC-Free, flexible corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
EIFS/DEFS Bullnose Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight.
Z-Girt for Rainscreen Framing
Z Girt for RainScreen framingGalvanized Z-Girt with standard depths to match common exterior insulation thicknesses. Can be installed in a vertical or horizontal orientation to accommodate…
ProChannel CI
Continuous insulation Rainscreen Framing systemProChannel Ci Cladding Support System is a thermally and structurally efficient exterior wall cladding support system utilizing the self-sealing Grip-…