Skip to main content

Search

Truss Spacer / Bracer

TRUSS SPACER / BRACER

The Truss Spacer/Bracer is used for lateral bracing and spacing of trusses 24 inches on center.
 

Application(s): Truss and Rafters

The CDTBR24 is made from high-strength steel to meet the industry’s most demanding engineering standards. It was designed from the ground up to solve field installation problems. The Truss Spacer/Bracer is used for lateral bracing and spacing of trusses 24 inches on center.

The CDTBR24 meets BCSI-B2 Truss Installation & Temporary Restraint/Bracing requirements, with values that exceed the competition in every installation configuration. To eliminate potential safety issues, the edges have been rolled and the tabs are inverted for easy installation.

Material: 24 gauge (23mil) 0.0238" Design thickness, 0.0227" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

load table

 

Code Approvals & Performance Standards

  • ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • IAPMO ER-0176 Evaluation Report for Wood Framing Hangers and Anchors
  • SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories

Product submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Description
CDTBR24 Truss Spacer / Bracer