Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight.
These corner beads are hard to damage, rust-proof, and straight.
Large perforations allow the base coat mixture to easily flow through and bond to the substrate for better embedment.
When joining continuous runs of corner bead the preferred method of alignment is to miter the flanges. When creating corner bead intersections, such as for exterior soffit corners, miter all flanges to prevent overlapping, which will cause poor bonding and alignment.
Product Data & Ordering Information
| Product code | Finish thickness | Insulation thickness | Flanges | Pcs./Ctn. |
|---|---|---|---|---|
| CB138E | 1/16" | All | 1-3/8" | 100 |
| CB158E | 1/16" | All | 1-5/8" | 75 |
Note: Available in 8 ft. and 10 ft. lengths.
Documents
Code Approvals & Performance Standards
- ASTM D1784 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- ASTM D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
- ASTM E2110 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- ASTM E2273 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
- ASTM E2486 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
- ASTM E2511 Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies
- ASTM E2568 Standard Specification for PB Exterior Insulation and Finish Systems
- SDS Vinyl Corp PVC Compounds
Product Submittal Sheets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| CB138E, CB158E | EIFS/DEFS Corner Bead |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.