


Feature a long leg to accommodate greater standoff for rigid connections.
EasyClip™ E-Series™ Support Clips are used for rigid stand-off connections.
The 4" wide leg provides extra length to achieve stand-off connections up to 3". They are commonly used in by-pass wall conditions, solid blocking attachments in joist framing and to secure rafter framing to the primary structure. These clips are pre-punched for faster and more accurate fastener placement.
- 4" leg accommodates large standoff.
- Lengths available in 3", 5", 7", 9" and 11".
- Available in 16, 14 and 12 gauge.
- Clip Express Sales at 866-638-1908 or clipexpress@clarkdietrich.com
- Technical Support at 888-437-3244 or support@clarkdietrich.com
Product Data & Ordering Information
Product code | Gauge | Mils | Design thickness (in) | Size (in) | Pcs./Bucket |
---|---|---|---|---|---|
E543 | 16 | 54 | 0.0566 | 4 x 1-1/2 x 3 | 100 |
E545 | 16 | 54 | 0.0566 | 4 x 1-1/2 x 5 | 100 |
E547 | 16 | 54 | 0.0566 | 4 x 1-1/2 x 7 | 100 |
E549 | 16 | 54 | 0.0566 | 4 x 1-1/2 x 9 | 50 |
E541 | 16 | 54 | 0.0566 | 4 x 1-1/2 x 11 | 50 |
E683 | 14 | 68 | 0.0713 | 4 x 1-1/2 x 3 | 100 |
E685 | 14 | 68 | 0.0713 | 4 x 1-1/2 x 5 | 100 |
E687 | 14 | 68 | 0.0713 | 4 x 1-1/2 x 7 | 80 |
E689 | 14 | 68 | 0.0713 | 4 x 1-1/2 x 9 | 50 |
E681 | 14 | 68 | 0.0713 | 4 x 1-1/2 x 11 | 50 |
E973 | 12 | 97 | 0.1017 | 4 x 1-1/2 x 3 | 50 |
E975 | 12 | 97 | 0.1017 | 4 x 1-1/2 x 5 | 50 |
E977 | 12 | 97 | 0.1017 | 4 x 1-1/2 x 7 | 50 |
E979 | 12 | 97 | 0.1017 | 4 x 1-1/2 x 9 | 50 |
E971 | 12 | 97 | 0.1017 | 4 x 1-1/2 x 11 | 40 |
Material Structural Grade 50 Type H (ST50H), 50ksi
Coating G90 (Z275) hot-dipped galvanized coating
See submittals for product weights
Installation
Support clips are attached to the cold-formed steel (CFS) framing members using #10 minimum self-drilling screws driven through the clip holes into the steel framing. When not filling all holes, install fasteners symmetrically starting at the top and bottom edges and move toward the center of the clip. Clip can also be welded to the CFS framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding. When using the tabular values for a welded clip, provide a full weld to the structure, top to bottom, along the outside of the clip. A 3/4" minimum weld on the outside edge of the 1-1/2" leg is also required to control warping or to hold the clip in place before final welding.
Code Approvals & Performance Standards
- ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories
CAD Details
Note: to view all of ClarkDietrich's CAD details, visit the CAD Details Library.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet
Product code | Gauge | Description | |
---|---|---|---|
E543 | 16 | 4 x 1-1/2 x 3 | EasyClip™ E-Series™ Support Clip |
E545 | 16 | 4 x 1-1/2 x 5 | |
E547 | 16 | 4 x 1-1/2 x 7 | |
E549 | 16 | 4 x 1-1/2 x 9 | |
E541 | 16 | 4 x 1-1/2 x 11 | |
E683 | 14 | 4 x 1-1/2 x 3 | |
E685 | 14 | 4 x 1-1/2 x 5 | |
E687 | 14 | 4 x 1-1/2 x 7 | |
E689 | 14 | 4 x 1-1/2 x 9 | |
E681 | 14 | 4 x 1-1/2 x 11 | |
E973 | 12 | 4 x 1-1/2 x 3 | |
E975 | 12 | 4 x 1-1/2 x 5 | |
E977 | 12 | 4 x 1-1/2 x 7 | |
E979 | 12 | 4 x 1-1/2 x 9 | |
E971 | 12 | 4 x 1-1/2 x 11 |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System
- Clip Express Sales at 866-638-1908 or clipexpress@clarkdietrich.com
- Technical Support at 888-437-3244 or support@clarkdietrich.com