

Finish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.
Partition End Caps are designed with a “T” slotted flange to create straight-to-curve arches by simply cutting the ends of "T" slots where arches or curve is desired. This product provides time (cost) savings through single-piece installation versus installing two corner beads. You also use less compound than two corner bead applications. Multiple perforations enhance strength of joint compound adhesion. Easy to cut, rust proof and dent resistant.
Product code | Board thickness | Overall width | "T" Slotted flanges | Length | Pcs./Ctn. |
---|---|---|---|---|---|
PEC50-358-10 | 1/2" | 4-5/8" | 1-1/8" | 10' | 10 |
PEC58-358-10 | 5/8" | 4-7/8" | 1-1/8" | 10' | 10 |
PEC50-250-10 | 1/2" | 3-1/2" | 1-1/8" | 10' | 10 |
PEC58-250-10 | 5/8" | 3-3/4" | 1-1/8" | 10' | 10 |
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.
Click the below Product Code to view Submittal/Tech Datasheet.
Product Code | Description |
---|---|
PEC50, PEC58 | Partition End Caps |
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.