Extended SwiftClip™ LE-Series

USED In rigid attachments of wall studs to the structure

ClarkDietrich’s Extended SwiftClip™ LE-Series rigid framing clip is used to attach exterior wall studs to the structure of the building.

Description

Designed to resist horizontal and vertical loads, the extended rigid clips install easily with screws, powder-actuated fasteners, or welds. This clip is ideal for all medium and large standoff conditions. These clips are unpunched as the specific application will determine the appropriate number and placement of fasteners.

  • 1-1/2" x 3" legs for up to 20" long clips
  • 1-1/2" x 2-5/8" legs + 1/2" return for clips longer than 20"
  • All clips: 68 mils (14 gauge) 50ksi, CP90
  • Extended SwiftClip LE-Series clips are unpunched
  • Lengths available: 16", 18", 20", 24", 30" and 36"
Technical Data

 

Extended SwiftClip LE-Series Allowable Loads

GROSS SECTION PROPERTIES
Product Code Area lx ly Sx Sy rx ry x(c) y(c)
(in2) (in4) (in4) (in3) (in3) (in) (in) (in) (in)
Extended SwiftClip < 20 in 0.311 0.304 0.056 0.155 0.046 0.988 0.424 0.281 1.04
Extended SwiftClip > 20 in 0.311 0.282 0.054 0.176 0.054 0.952 0.418 .307 1.02

Table Notes:

  1. Extended SwiftClip LE-Series intended for axial compression and tension loading
  2. lx, ly are the gross moment of internia about the X-axis and Y-axis, respectively.
  3. Sx, Sy are the section modulus about the X-axis and Y-axis, respectively.
  4. rx, ry are the radius of gyration about the X-axis and Y-axis, respectively.
  5. x(c), y(c) are the distances of the centroid to the X-axis and Y-axisattachment planes.
Installation

Installation:

Extended SwiftClip™ LE-Series are attached to cold-formed steel framing members using #10 minimum selfdrilling screws. Clips can also be welded to the cold-formed steel framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding. The appropriate type, number and placement of fasteners need to be determined by a design professional and engineer of record.

Resources

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Description
LE6816 Extended SwiftClip™ LE-Series
LE6818
LE6820
LE6824
LE6830
LE6836

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.