Provides incredibly straight and smooth inside 90° corners for drywall finishing
Rigid steel-reinforced inside corners provide a durable guide to achieve exceptionally straight and sharp inside corners.
Tape-on inside 90° paper-faced corner bead provides very straight and precise inside corners. Paper-faced inside corners are embedded in joint compound and pressed firmly into place. Excess compound is removed with a drywall knife.
- Virtually eliminates costly callbacks
- Impervious to “scuffing” and “fluffing-up”
- Will not be damaged by sanding
- Substantially reduces joint compound consumption and eliminates one finish coat
- Does not require mechanical fastening (no nails, staples, screws or crimps)
- Superior adhesion, bonding and paintability
- Does not require nose coating
- U.S. Patent Nos. 5,613,335 and 5,836,122
Material: 0.0125 galvanized coating
Product Data & Ordering Information
| Product code | USG Reference | Style | Dimensions | Pcs./Ctn. | |||
|---|---|---|---|---|---|---|---|
| A | B | C | D | ||||
| CD2-E or P2 | B2 |
Standard Angle |
5/8" | 3/8" | 3/8" | 5/8" | 50 |
Standard lengths are 8' and 10'. Other lengths available.
Code Approvals & Performance Standards
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS For ASTM A653 Steel Finishing Products For Interior Finishing and Exterior Finishing
Storage:
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| CD2-E or P2 | Paper-Faced Inside Corner Bead |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.