Sprinkler pipe patch
Pre-cut to fit standard sprinkler pipes.
Application(s): Drywall
Black-Iron Patch easily installs using standard drywall compounds and corrects cutouts that were made too large. Black-Iron Patch will not fuzz-up during sanding.
- Pre-cut to fit standard sprinkler pipes
- Repairs and reinforces mis-cut or damaged areas around sprinkler pipe holes
- Install in areas where patching cutouts were made too large
- Sprinkler pipe relocation
Product Data & Ordering Information
| Product code | Size | Hole Size | Wholesale Case | ||
|---|---|---|---|---|---|
| Type | Pcs/Case Pack | Cases/Pallet | |||
| BP-100 | 4-1/2" dia. | 1-3/8" dia. | 10 Count Bag | 10 bags of 10 | 24 |
Installation
- To apply, lightly sand area to be repaired.
- Apply drywall compound 1/8”-1/4” thick directly to back of patch.
- Place patch over center of repair and wipe down flat to wall using joint knife.
- Immediately skim-coat patch and let dry.
- Apply second coat, let dry, and sand. Compound that remains on backside of Black-Iron Patch makes patch very rigid in the damaged area.
Documents
Code Approvals & Performance Standards
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Joint Tape For Joint Tape
Storage:
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from weather and moisture.
Product Submittal Sheets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| BP-100 | Black-Iron Patch |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.