Soffit Vent with Perforated Flanges

Provides an economical means for venting soffit areas

One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent clips are provided for proper connection and to assist in the alignment of the soffit vents. 

Application(s): EIFS, DEFS
Description

ClarkDietrich one-piece soffit vents provide an economical means for venting soffit areas.

Vent clips are provided for proper connection and alignment of the soffit vents.

Caulk all intersections, butt joints, ends, and corners at the time of installation.

Dissimilar board thicknesses are available on a made-to-order basis.

When ordering, please include both board thicknesses in the product code. For example, to combine 1/2" and 5/8" board with a 1" wide vent, order DE/CS50-58-100V.

Resources

Catalog

ASTM & Code Standards

Product Specifications

  • ASTM E2568 - Standard Specification for PB Exterior Insulation and Finish Systems
  • ASTM D1784 - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D4216 (Cell class 13244C) - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Compounds and Related PVC and Chlorinated Poly Vinyl Chloride (CPVC) Building Products Compounds
  • ASTM D638 - Standard Test Methods for Tensile Properties of Plastics
  • ASTM D790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
  • ASTM D256 - Standard Test Methods for Determing the Izod Pedulum Impact Resistance of Plastics
  • ASTM D648 - Standard Test Methods for Deflection Tempurature of Plastics Under Flexural Load in the Edgewise Position
  • ASTM D696 - Standard Test Methods for Coefficient of Linear Thermal Expansion of Plastics Between -30 Degrees Celsius and 30 Degrees Celsius Vitreous Silicia Dilatometer
  • SDS & Product Certification Information

Installation Standards

  • ASTM E2110 - Standard Terminology for Exterior Insulation & Finish Systems (EIFS)
  • ASTM E2486 - Standard Test Methods for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
  • ASTM E2273 - Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
  • ASTM E2511 - Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies
Submittals

Product Submittal Sheets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
DE/CS-100V 1" Soffit Vents with Perforated Flanges
DE/CS-150V 1-1/2" Soffit Vents with Perforated Flanges
CBS-200V 2" Soffit Vents with Perforated Flanges
CBS-300V 3" Soffit Vents with Perforated Flanges
CBS-400V 4" Soffit Vents with Perforated Flanges
CBS-600V 6" Soffit Vents with Perforated Flanges

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.