

Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough concrete or masonry ceilings.
Application(s): Plaster
Sized to fit 1/2" and 5/8" gypsum plaster base, 701B provides 3/32" grounds for two-coat veneer, and 801B has 1/16" grounds for one-coat veneer plaster. Available in standard length of 8' and 10'.
- Mini-mesh flanges for keying
- Eliminates shadowing
- Galvanized coated for corrosion protection
- Also available in zinc
Material: 0.013 min thickness, G30 galvanized
Product Data & Ordering Information
Product Code | Type | Grounds | Width | Length | Ctn./Skid |
---|---|---|---|---|---|
M71B | 701B | 3/32" | 1/2" | 8' or 10' | 50 |
M71B | 701B | 3/32" | 5/8" |
8' or 10' |
50 |
M81B | 801B | 1/16" | 1/2" | 8' or 10' | 50 |
M81B | 801B | 1/16" | 5/8" | 8' or 10' | 50 |
Code Approvals & Performance Standards
- ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM C840 Standard Specification for Application and Finishing of Gypsum Board
- ASTM C841 Standard Specification for Installation of Interior Lathing and Furring
- SDS For ASTM A653 Steel Finishing Products For Interior Finishing and Exterior Finishing
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
Product Code | Description |
---|---|
M71B & M81B | #701B L-Trim 1/2" |
#701B L-Trim 5/8" | |
#801B L-Trim 1/2" | |
#801B L-Trim 5/8" |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.