Search

Straps (CDMS Series)

CDMS
CDMS - Dims

STRAPS

Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.

Application(s): Angles and Straps

Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.

CDMS Straps are 1-1/4" wide and available in lengths from 21-5/8" to 39-5/8". Three holes are located at 3/4" on center, in a diagonal pattern, at each end of the strap. Remaining holes are punched at 1-1/2" on center, in a diagonal pattern. At mid length of each strap is a 3" long section with no holes.

Material: 16ga (54mil), 0.0566" Design thickness, 0.0538" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available except on CDMS27, CDMS33 & CDMS39)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

 Strap Dimensions (in)
Product CodeWL
CDMS211-1/421-5/8
CDMS241-1/424-5/8
CDMS271-1/427-5/8
CDMS301-1/430-5/8
CDMS331-1/433-5/8
CDMS361-1/436-5/8
CDMS391-1/439-5/8

 

load tables

 

Documents

Code Approvals & Performance Standards

  • ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • IAPMO ER-0176 Evaluation Report for Wood Framing Hangers and Anchors
  • SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories

Product submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product codeDescription
CDMSStraps (CDMS Series)