Skip to main content


Gusset Plates (G-Series & GP-Series)

Punched Or Unpunched Gusset Plates

Gusset plates for easier and faster attachments of X-Bracing or roof framing

G-Series™ Punched gusset plates

G-Series™ Punched gusset plates are multipurpose connectors used in a variety of framing connections including roof framing, header framing and shear wall applications. Adapts to varying construction tolerances and to multiple configurations.

  • Multihole shapes for proper fastening to achieve desired performance criteria
  • Eliminates angled cutting
  • Mill-certified 50 ksi steel

GP-Series™ UNPunched, custom size Gusset Plate

Custom size, unpunched Gusset Plates are used in conjunction with X-bracing in load-bearing shear wall assemblies to resist racking under wind and seismic loads.

Gusset Plates and diagonal tension strapping components are used in combination to provide shear wall (racking restraint) for light-gauge load-bearing framing under wind and seismic loads. They are normally installed on both sides of the wall directly over the framing members and are easily covered with facing materials.

  • Provides racking restraint
  • Used in shear wall assemblies
  • Resist uplift and shear forces

CAUTION: Racking loads are first transferred to the roof or floor decking and then to the shear walls (X-bracing or Flat Strapping). The X-bracing then relies on a proper anchorage to the foundation to resist uplift and shear forces. In order for the system to function properly, the load path from the roof or floor deck to the shear walls to the foundation must be complete. This normally requires additional bracing, blocking, track and rim splices, drag struts, uplift anchors and heavy-duty foundations.


Straps are positioned diagonally from the bottom track to the top track. In order to resist load in each direction, an X-configuration should be used. At a minimum, double studs are positioned at ends of the X-brace to serve as compression studs. Straps are either attached directly to the compression studs or are attached via gusset plates. Compression studs must be anchored to the foundation, normally with ClarkDietrich Holdowns. For multistory construction, the uplift loads can be extremely high. It is recommended that you enlist the services of a qualified professional engineer to verify the applicability of the system selected.

Code Approvals & Performance Standards

  • ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product CodeDescription
G43618ga G-Series Gusset Plate 
G54616ga G-Series Gusset Plate
G68614ga G-Series Gusset Plate

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.