when the ultimate Self-Furring corrosion resistance is required
When the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or contoured surfaces and for ornamental work as well as for use as a reinforcing underlayment for deck coatings, drainage areas, pools and water treatment, coastal applications, high temperature covering, fireproof coatings, among other special uses. Produced in both SS304 and SS316 alloys, for special requirements.
A high-performance stainless-steel lath used for environments with a propensity for corrosion. Applications include coastal environments, around landscaping, rockwork, theme parks, tunnels & bridges, high-temperature applications, waterproofing and drainage systems, among others. The V-grooved furring is manufactured with evenly spaced embossed grooves at 6-inches on-center which run the length of the lath sheet. These V-grooves hold the SS lath uniformly ¼-inch away from the surface to embed cementitious materials. The V-grooves provide a point of attachment of the fastener to the framing or substrate.
ClarkDietrich produces in Two stainless alloys:
- SS304 – the most common stainless steel grades and offers a combination of good mechanical properties and excellent corrosion resistance. Excellent resistance to a wide range of corrosive environments, including acidic and alkaline solutions. Particularly resistant to oxidation, making it suitable for high-temperature applications.
- SS316 - known for its excellent corrosion resistance and superior performance in harsh environments, particularly in marine applications. Exceptional resistance to pitting and crevice corrosion, especially in chloride environments such as seawater. Greater resistance to corrosion compared to 304 stainless steel, due to the presence of molybdenum.
All fasteners or attachments should match the same 300 series stainless alloy or to isolate other alloy fasteners via non-metallic washers to avoid dissimilar metal contact.
Contact ClarkDietrich Technical Support for additional application questions.
Product Data & Ordering Information
Material: Stainless Alloy 304 or 316 Grade
Packaged: Individual Sheets
| Product Code | Material | Weight per Sq. Yd. | Sheet Size |
|---|---|---|---|
| SS304-25-SFVGL | 304 Stainless Steel | 2.5 lbs. | 27" x 97" |
| SS304-34-SFVGL | 304 Stainless Steel | 3.4 lbs. | 27" x 97" |
| SS316-25-SFVGL | 316 Stainless Steel | 2.5 lbs. | 27" x 97" |
| SS316-34-SFVGL | 316 Stainless Steel | 3.4 lbs. | 27" x 97" |
Documents
Code Approvals & Performance Standards
- ASTM A240 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- ASTM C847 Standard Specification for Metal Lath
- ASTM C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- ASTM C1780 Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
- SDS Stainless Steel Lath Stainless Steel
All fasteners or attachments to match same stainless alloy, or isolate the galvanized fasteners via neoprene washer to avoid dissimilar metal contact.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| SS304-25-SFVGL, SS304-34-SFVGL | 304 Stainless Steel Self-Furring V-Groove Lath |
| SS316-25-SFVGL, SS316-34-SFVGL | 316 Stainless Steel Self-Furring V-Groove Lath |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.