Expanded flange control joint
#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint counteracts the inherent shrinkage during stucco curing and general thermal changes.
This nearly inconspicuous, expanded wing control joint minimizes cracking and assures proper plaster and stucco thickness.
Ground heights include 3/8” for thin coat plaster and 1/2", 5/8", 3/4" and 7/8” for conventional plaster applications. Follow use provisions outlined in ASTM C1063.
The #15 Double-V Control Joint is also available in zinc alloy for increased corrosion resistance.
Product Data & Ordering Information
| Product Code | Ground | Length | Pcs./Ctn. |
|---|---|---|---|
| VVCJ | 3/8" | 10' | 24 |
| 1/2" | 10' | 24 | |
| 5/8" | 10' | 24 | |
| 3/4" | 10' | 24 | |
| 7/8" | 10' | 24 |
Documents
Code Approvals & Performance Standards
- ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- ASTM C1861 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
- SDS For ASTM A653 Steel Finishing Products For Interior Finishing and Exterior Finishing
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| VVCJ | #15 Double-V Control Joint |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.