



Designed AS A WATER-ACTIVATED OUTSIDE 90° AND OUTSIDE OFF-ANGLE CORNER BEAD ON A ROLL
Water-activated adhesive on inside of roll.
Application(s): Drywall
Water-activated outside 90° and outside off-angle corner bead on a roll. No paper-face to fuzz-up, burn-through, delaminate or curl.
- Easily transported to and from job site. No waste.
- Impact-resistant nose.
- Small bead creates a perfect, clean edge.
- Small fill coat. Fast drying.
- No delayed shrinkage or edge cracking.
Product Data & Ordering Information
Product code | Width | Length | Wholesale Case | |
---|---|---|---|---|
Rolls/Case Pack | Cases/Pallet | |||
WETF-100 | 3" | 100' | 8 | 24 |
Documents
Code Approvals & Performance Standards
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Wet Stick For Wet Stick
Storage:
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from weather and moisture.
Product Submittal Sheets
Click the below Product Code to view Submittal/Tech Datasheet.
Product Code | Description |
---|---|
WETF-100 | Wet-Flex Flexible Corner Bead |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.