C-Joist

Provide a lightweight, low-cost, rigid floor assembly

C-Joist components provide an economical, lightweight alternative to open web trusses, bar joists, engineered lumber, cast-in-place or hollow core floor assemblies.

Found In:
Floor Framing > Standard Joist System & Accessories
Description

Depending on loads and spans, C-Joists are typically spaced at 12", 16", 19.2" or 24" on-center spacing. Structural track, usually in the same gauge as the joist, is used as rim or band enclosures. Joist to girder attachments are normally supported with joist hangers, EasyClip™ E-Series™ or S-Series™ support clips. Web stiffeners may be required at supports and other point loads. Solid blocking and strap bridging is required to properly brace the floor assembly.

  • Precut to exacting sizes and readily available
  • Joist sizes include 8", 10", 12" and 14"
  • Available in 18, 16, 14 and 12 gauge
  • Flange widths include 1-5/8", 2", 2-1/2" and 3"

See ClarkDietrich's Structural C-Stud page for more technical information.