Designed to be used with channel reveals as a base for sealants
And to assist in alignment.
Application(s): Stucco
Designed to assist in the alignment of control joints and to provide a base for caulking.
Product Data & Ordering Information
| Product code | Width | Inside | Length |
|---|---|---|---|
| CC50 | 1/2" | 2-1/4" | 3" |
| CC75 | 3/4" | 3-1/4" | 3" |
| CC100 | 1" | 3-1/4" | 3" |
| CC150 | 1-1/2" | 3-1/4" | 3" |
| CC200 | 2" | 4-1/4" | 3" |
| CC250 | 2-1/2" | 5-1/8" | 3" |
| CC300 | 3" | 5-1/8" | 3" |
Note: Pieces per carton are determined by product mix per order.
Documents
Code Approvals & Performance Standards
- ASTM C841 Standard Specification for Installation of Interior Lathing and Furring
- ASTM C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- ASTM C1780 Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
- ASTM C1861 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
- ASTM D1784 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- ASTM D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
- SDS Vinyl Corp PVC Compounds
STORAGE
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.
Product submittal Sheets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| CC50, CC75, CC100, CC150, CC200, CC250, CC300 | Connector Clips (for Channel Reveals) |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.