Corner Reinforcing
Innovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Application(s): Stone Veneer, Stucco
V-Truss offers advancements over the original Structa Corner design, including greater strength, ease of installation and increased embedment.
Find out more about Structa Wire here
STRAIGHT AND TRUE CORNER REINFORCEMENT
- Structa V-Truss is engineered to provide superior reinforcement for stucco corners
- Its unique 'Truss' design ensures a 'true' straight corner every time
- It provides improved embedment
- The product allows for lots of nailing opportunities
- It’s easy to handle, with few sharp ends
- Twin Tracs allow for easy attachment and increased rigidity
STRUCTA V TRUSS IS AVAILABLE IN 3 PROFILES: 3 COAT, 1 COAT AND BULLNOSE
- V-Truss 3 Coat and 1 Coat have three nose wire – 2 1/2" legs
- They are available in 10'
- V-Truss Bullnose has four nose wires to give a smooth and round nose
- Specialty profiles are available in our original Structacorner 'loop' design
- Structacorner Arch is available in 3 coat and Bullnose (7/16" radius)
- Structacorner Short Flange is available is 3 Coat, 1 Coat or Bullnose
- Short Flanges are 2-1/2" by 1-1/2" leg lengths
Product data & ordering information
- 40 pieces per carton
- 50 cartons per pallet
- All nose wires should be covered with 1/8″ stucco
- Products should be stored per ASTM C1063-97
FOR SALES AND TECHNICAL QUESTIONS:
- East Coast to Texas: (800) 543-7140
- West of Texas to California: (800) 887-4708
Installation
Easy Embedment System (EES)
Code Approvals & Performance Standards
- ASTM A641 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
- ASTM C933 Standard Specification for Welded Wire Lath
- ASTM C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- ASTM C1861 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
- IAPMO ER-2017 Metal Lath
- SDS StructaWire for StructaWire products
Specifications & Substitution Forms
To simplify the Product Substitution Request process when Structa Wire or ClarkDietrich’s products are not listed in the Architectural Specification, see our CSI Substitution Request Forms to help streamline the procedure.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product code | Description |
|---|---|
| V Truss Bullnose Corner | V Truss Corners |
| V Truss Straight Corner |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.