Search

Double Shear Face-Mount Hangers - CDMDS

double shear face-mount hangers - CDMDS

Double shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation.

Application(s): Hangers

Double shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation. Use the enhanced nailing schedule for greater load carrying capacities.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
                 16ga (54mil), 0.0566" Design thickness, 0.0538" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
(G185 available except CDMDS1.81/10, CDMDS210-3, CDMDS210-4, CDMDS26-3 & CDMDS28-4)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

load table

 

Installation

  • Use all specified fasteners.
  • Joist nails must be driven at an angle in the joist or truss to achieve the published loads.
  • Not designed for welded applications

Documents

Code Approvals & Performance Standards

  • ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • ICC-ES ESR-5062 Evaluation report for joist hangers
  • SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories

Product submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Description
CDMDS Double Shear Face-Mount Hangers