Fire rated deflection assembly for interior partitions & curtain-wall framing
The UltraTRAK Slotted system utilizes a UltraTRAK slotted deflection track in conjunction with UltraBEAD providing a 1 or 2 HR rated assembly for a ¾” max joint and is UL 2079-Fifth Edition compliant.
The UltraTRAK slotted system utilizes a UltraTRAK slotted deflection track in conjunction with the UltraBEAD providing a 1 or 2 HR rated assembly for a ¾” max joint and is UL 2079-Fifth Edition compliant. UltraBEAD creates an easy attachment that is attained with staples through the bead flange. Multiple perforations along the 1-1/8" flange enhance strong compound adhesion and the raised shoulder provides for a flush finish. Rigid vinyl is rust proof, dent resistant and easy to field cut without distorting profile or leaving sharp edges and burrs. Deflection track details must be designed for the specific conditions of a building to accommodate the required deflection and end reactions of the studs. Deflection tracks cannot be used in axial load-bearing stud conditions or above continuous window spandrels.
- UL Classified and Listed Joint Systems
- Nonproprietary system.
- Traditional framing components.
- U.S. Patent Pending on UltraBead
- AISI S220-15 North American Standard for CFS Framing - Nonstructural Members
- (Compliant to ASTM C645 , but IBC replaced with AISI S220 in IBC 2015)
- Section A4 Material - Chemical & mechanical requirements (Referencing ASTM A1003/A1003M)
- Section A5 Corrosion Protection (Referencing ASTM A653/A653M)
- AISI S240-15 North American Standard for Cold-Formed Steel Structural Framing
- (Compliant to ASTM C955 , but IBC replaced with AISI S200 in IBC 2015, AISI S240 in IBC 2018)
- Section A3 Material - Chemical & mechanical requirements (Referencing ASTM A1003/A1003M)
- Section A4 Corrosion Protection (Referencing ASTM A653/A653M)
- SFIA Stud Code Compliance Certification Program
- UL Design HW-D-0924 Joint system
- UL Design 2079 Fifth Edition Tests for Fire Resistance of Building Joint Systems
- (When used in conjunction with UltraBead)
- SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories
Product submittal Sheets
Click the below Product Code to view Submittal/Tech Datasheet.
|UltraTRAK slotted system||Slotted deflection track with UltraBEAD|
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.