Search

Mini-Bead™ 800 and 900

Provides superior keying for joint compound for one-coat plaster veneer systems

Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges are tapered along the outer edges to enhance veneer plaster concealment.

Application(s): Plaster

Mini-Bead™ 800 has 1/16" grounds for one-coat veneer plaster and 90 keys per linear foot for excellent bonding and strong corners.  Mini-Bead™ 900 has 3/32" grounds for two-coat veneer plaster systems. Flange attachments can be accomplished by either nailing or stapling.

  • Mini-mesh flanges for plaster keying
  • Galvanized (Also available in zinc for corrosion protection)
  • Eliminates shadowing and edge cracking

Material: 0.013 min thickness, G30 galvanized

Product Data & Ordering Information

Product Code Ground Flanges Length Pcs./Ctn.
MB80 1/16" 1-1/4" x 1-1/4" 8' 60
10' 60
MB90 3/32" 1-1/4" x 1-1/4" 8' 60
10' 60
Architectural Specs AIA / CEU SustainabilityPRO

Code Approvals & Performance Standards

  • ASTM C841 Standard Specification for Installation of Interior Lathing and Furring
  • ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
  • ASTM C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
  • SDS For ASTM A653 Steel Finishing Products For Interior Finishing and Exterior Finishing

Storage

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
MB80 & MB90 Mini-Bead 800/900

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.