Search
Products
Strait-Flex® IS-300
DESIGNED FOR INSIDE 90° CORNERS, WHERE LARGE FRAMING IRREGULARITIES NEED TO BE OVERCOMEIS-300 is designed for 90-degree inside corners where speed and strength are needed and/or where large framing…
Strait-Flex® Arch-Stick
composite arched corner BEAD
Designed for outside 90° arched corners, eliminating flat spots.
Strait-Flex® Big-Stick
Designed for high traffic, outside 90° cornersThe easiest corner bead on the market to install and repair.
Strait-Flex® Wet-Stick
composite water-activated adhesiveDesigned for outside 90° corners without the need of compound or fasteners.
Strait-Flex® Original
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Original is a versatile, multi-purpose drywall corner bead available in 100 ft. rolls.
Strait-Flex® Medium
Finishes INSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Medium is a high-performance drywall corner bead.
Strait-Flex® Arch-Flex
DESIGNED FOR COMPOUND ARCHES AND DOUBLE CURVE APPLICATIONS
Arch-Flex is designed for compound arches and double curve applications, including arched windows and doors, ceilings, soffits, staircases…
Strait-Flex® Gold
High-Performance Drywall Corner BeadStrait-Flex Gold is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Strait-Flex® Mid-Flex
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Mid-Flex is a muddable, paper-faced composite, flexible corner bead that adjusts to any angle to create perfect inside and outside 90…
Outlet-Patch
electrical outlet patchOutlet-Patch repairs and reinforces mis-cuts or damaged areas around receptacle boxes.
Strait-Flex® Perfect-90°™
Finishes inside 90° and off-angle corners
Perfect-90º™ ensures a clean, sharp corner without the risk of damage from a taping knife.
Strait-Flex® Ammo-Flex
Designed for bazooka® applications
Loads into any Bazooka® for fast applications of intricate off-angles or inside 90º corners.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Strait-Flex® Uno-Bead 222
DESIGNED FOR replacing or repairing metal corner beadUno-Bead222 is Ideal for drywall, thin-coat plaster applications.
Strait-Flex® Wet-Flex
Designed AS A WATER-ACTIVATED OUTSIDE 90° AND OUTSIDE OFF-ANGLE CORNER BEAD ON A ROLL
Water-activated adhesive on inside of roll.
Roll-Patches
continuous patch material
Continuous roll patch width allows material to be cut to any length.
Strait-Flex® Tuff-Tape
Designed for strength and speed and as a paper tape replacement
Used in areas where humidity causes paper tape to fail.
Strait-Flex® Crack-Tape
Repairs persistant cracks in corners and on flat surfaces
Tested to be two times stronger than paper or mesh tapes.
Strait-Flex® Tile-Tape®
Designed for tile, marble and granite and water and mold resistant
Produces straight, strong, and water-proof inside, outside and off-angle corners.
Strait-Flex® Butt-Tape
Designed for fast, flat, butt-jointsVertical and horizontal butt-joints and commercial “Top-Out” applications.
Super-Bond
drywall compound additiveA joint compound additive ensuring maximum bonding of tapes with drywall.
Drywall Shims
Used for floating butt-joints, framing irregularities, hanging door jambs and cabinetsShims save time by shimming drywall to allow greater inset at joints.
Extension Pole
Firberglass and aluminum poleExtension pole for painters, drywall contractors and moving companies.
Flex-Folder
hand-held tape folderSpeeds the folding of all flexible composite corner beads to correct installation angles.
Mud-Pro 2
compound applicatorMud-Pro2 is the fastest, cleanest, and most durable compound applicator on the market. Designed to apply precise amount of compound to inside and outside 90 corner beads…
Inside Rolling Tools
For use with all inside corner productsSpecifically designed to speed application time of inside corner applications.
Outside Rolling Tools
Speeds application time for outside corner productsSquares up cornerbeads on walls.
Strait-Flex® X-Crack
Framing AlignmentEliminates ceiling cracks and straightens uneven framing.
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
V-Truss Corner
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
V Truss - Walls & Ceilings
Wall & Ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
#36 Sill Screed
Exterior Foundation sill screedA variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
#30 Corner Master™ Control Joint
Expanded flange inside corner control joint
#30 Corner Master™ Expansion/Contraction Control Joint (Double-V) is designed to provide stress relief at inside corner intersections on plaster walls.…
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Strait-Flex Wide-Flex
FINISHES INSIDE AND outside 90° AND OFF-ANGLE CORNERSStrait-Flex Wide-Flex is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-…
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
Strait-Flex® OS-400
DESIGNED for outside 90° corners where large voids and irregularities occurDiamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.
Pro-Flex300™
Finishes inside 90° and off-angle cornersPro-Flex300™ is a muddable, PVC-Free, flexible corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Perma-Patch
multi-purpose drywall patchPerma-Patch quickly repairs doorknob damage to drywall and is ideal for mis-cut or relocation of receptacles, ceiling and can lights.
Can-Patch (Commercial)
Can light patch (commercial)Pre-cut 6-1/4" hole fits standard commercial ceiling lights and can light receptacles.
Can-Patch (Residential)
Can light patch (residential)Pre-cut 6-1/4" hole fits standard residential ceiling lights and can light receptacles.
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Head-Patch
sprinkler head patch, standard and flush stylePre-cut to fit standard sprinkler head safety caps.
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Cornerite™
Reinforcement for inside or outside cornersCornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
#1A Expanded Corner Bead
GALVANIZED STEEL Expanded flange corner bead for exterior cornersA solid nose, all-purpose exterior corner bead. Strong and economical with multiple general use purposes.
#66X Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco &…
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
Structa Fusion
One Coat lath reinforcingStructa Fusion One Coat is an alternate to 20 gauge woven wire for One-Coat stucco applications. Fusion combines expanded metal with welded wires to create unique patented…
Stainless Steel Dimpled Self-Furring Lath
1/4" self-furring, dimpled, stainless steel Plaster and Stucco BaseA stainless steel, self-furring expanded dimpled metal lath ideal for exterior use over concrete or UL fire-rated sheathing, masonry…
#15 Double-V Control Joint
Expanded flange control joint#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint…
#XJ15 Double-J Control Joint
Expanded flange control joint with a taped reveal for a clean finish#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
#66N Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows over…
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Bullnose Corner Bead
Creates elegant, rounded outside drywall cornersBullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Bullnose adds contemporary styling and a sense of openness…
Clinch-On Dull Corner Bead
Premier drywall finishing beadClinch-On Corner Bead is recognized as the premier product for providing sturdy metal reinforcement on 90° drywall corners.
GhostBead™ Bullnose Corner Bead
ghostbead™ bullnose corner bead seamlessly blends with joint compoundClarkDietrich GhostBead™ Bullnose metal corner bead is primed with a white surface treatment to blend in with joint compound, and…
GhostBead™ Square Corner Bead
ghostBead™ Square Corner Bead seamlessly blends with joint compoundClarkDietrich GhostBead™ metal corner bead is primed with a white surface treatment to blend in with joint compound. This…
Clinch-On Hot-Dipped Corner Bead
Hot-dipped steel reinforcement for long-lasting, corrosion-resistant drywall corner protectionHot-dipped corner bead provided by Clinch-On Products, Co. offers the identical roll-formed precision as…
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
Mini-Bead™ 800 and 900
Provides superior keying for joint compound for one-coat plaster veneer systemsMini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat…
Quicksilver™ Corner Bead
Hot-Dipped METAL CORNER BEAD Quicksilver™ corner bead is used to achieve outside 90° corners.
Splayed Corner Bead
Superior finish and reinforcement for off-angle drywall corners135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
West Coast Corner Bead
West coast Corner BeadClarkDietrich west coast corner bead is used to provide a professional finish and protection at drywall corners. This traditional drywall finishing product is nailed,…
103 Deluxe® Corner Bead
Dull-Finish Metal Corner BeadClarkDietrich 103 Deluxe® corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is…
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.