Search
Products


Deep Leg Deflection Track System
Traditional, single-track deflection assembly for interior partitions & curtain-wall framing
This traditional assembly accommodates the deflection of the building structure at the head of wall.


Deflection Track w/ ProTRAK Liner
… A vinyl sleeve insert used inside a deflection track for interior walls to break the steel-on-steel connection. … Deflection track for interior walls w/ ProTRAK Liner provides a vinyl … Thickness: 33mils (20ga STR) 43mils (18ga) 54mils (16ga) 68mils (14ga) ProTRAK Liner Thickness: 0.050" PVC …


MaxTrak® Slotted Deflection Track
Performance that stands up to deflection
For superior head-of-wall vertical deflection, and the added benefit of horizontal drift movement, ClarkDietrich has your answer.


UltraBEAD with Deep Leg Deflection Track
Fire rated deflection assembly for interior partitions & curtain-wall framing
The UltraBEAD with Deep Leg Deflection Track system utilizes a deep leg deflection track in conjunction with the…


BlazeFrame® RipTRAK™
… head-of-wall deflection track - 1 & 2 hour system BlazeFrame RipTRAK is a deflection track with an offset shoulder that represents the … for both roof and wall assemblies. BlazeFrame RipTRAK is a deflection track with an offset shoulder that represents the …


Fast Top™ Clip (FTC)
Used in head-of-wall deflection conditions for exterior curtain wall and interior, nonload-bearing walls
ClarkDietrich Fast Top™ Clips are used in head-of-wall deflection conditions for in-fill…


UltraBead - Fire, Smoke & Sound
… UltraBEAD, when used in conjunction with UltraTRAK slotted deflection track or Deep Leg deflection tracks, provides joint protection up to ¾” for a 1 … foot. When used in conjunction with UltraTRAK or deep leg deflection track, the UltraBEAD is UL 2079-Fifth Edition …


BlazeFrame® RipTRAK™ Shaftwall
… head-of-wall deflection track - 1 & 2 hour system … fire-rated head-of-wall joint system for up to 4" Total Deflection Movement. … BlazeFrame RipTRAK Shaftwall is a … you need: (Click here for an Ordering Form) Is total deflection the same as deflection gap? Not at all. Yep, it …


UltraTRAK Slotted System
Fire rated deflection assembly for interior partitions & curtain-wall framing
The UltraTRAK Slotted system utilizes a UltraTRAK slotted deflection track in conjunction with the UltraBEAD …


FastClip™ Slide Clips (FCSC)
Provide for vertical building movement up to 3"
ClarkDietrich FastClip™ Slide Clip 68mils (14ga) deflection clips are used to attach exterior curtain-wall studs to the building structure and provide…


Universal Bypass Clips (UBC)
Provides either a rigid connection OR vertical building movement up to 3”.
Universal Bypass Clips are used to attach exterior curtain wall studs to the building structure and provide either a rigid…


YurClip
Used in head-of-wall deflection conditions for interior, non-load bearing walls
YurClips are used in head-of-wall deflection conditions to provide for vertical movement.


Drift Head-of-Wall (DHOW)
… are used in place of, or in combination with, deflection track. The Drift Head-of-wall clips can be attached to the … in structural stud gauges 20ga (33mil), 18ga (43mil) or 16ga (54mil). The DHOW-HG (heavy gauge) is designed to be … Clips for attaching 20ga (33mil), 18ga (43mil), or 16ga (54mil) structural studs DHOW6-LG DHOW8-LG DHOW3-HG …


EXTENDED FastClip™ (FCEC)
Provides for vertical building movement up to 3” and is commonly used for large standoff conditions
EXTENDED FastClip™ Slide Clip™ (FCEC) 68mils (14ga) deflection clips (8" clip is available in 14ga…


TRAKLOC® Drywall Framing System
Telescopes in length to deal with variances during installation
TRAKLOC® allows you to order one length member and “adjust” the length accordingly to make up for variances in the slab. The two-piece…


Drift FastClip™ Slide Clip (D-FCSC)
Vertical and lateral building movement up to 2"
ClarkDietrich Drift FastClip™ Slide Clips 68mils (14ga) or 97mils (12ga) are used to attach exterior curtain-wall studs to the building structure and…


Drift Rail (DR97) and Clip (DRC)
UNIVERSAL 2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONS
ClarkDietrich Drift Rail 97mil (12ga) and Clip 97 mil or 68mil (12ga or 14ga) is a uniquely designed two-piece system that is…


DoubleTrack™ System
DoubleTrack™ or track-over-track curtain-wall deflection system
A DoubleTrack™ system is a two-piece assembly that accommodates deflection of interior partitions and exterior curtain walls.


Flat Tail™ Slide Clip (FTSC)
Allows for vertical building movement and provides a horizontal standoff
ClarkDietrich Flat Tail™ Slide Clip is used to attach exterior curtain-wall studs to the building structure and provide for 2…


FastClip™ Slide Clip (FCSC-HD) w/Anchor Holes
Vertical building movement up to 3"
ClarkDietrich FCSC-HD 68mils (14ga) is used to attach exterior curtain-wall studs to the building concrete structure and provide for vertical building movement…


Fast Strut™ (FS12, FS15, FS18, FS20, FS22, FS24)
Used for large standoff conditions
ClarkDietrich Fast Strut™ curtain-wall connector employs the Fast Clip™ technology for curtain-wall stud attachment and is commonly used when large stand-off…


ProSTUD® Drywall Framing System
… during drywall installation Strong, lightweight stud and track cuts and handles easier than conventional flat steel … ProSTUD Drywall Framing. … ProTRAK® Deep Leg Deflection Track Systems Head-of-wall vertical deep leg deflection track … ProTRAK® Deep Leg Track Structural Deep Leg Track (18ga. & 16ga.) MaxTrak™ Slotted Deflection Track The below link shows …


BlazeFrame® (DL 1)
… two solid legs w/ firestop on one side. Composite Firestop Deflection Track System for use in fire rated wall …


BlazeFrame® (DL 2)
… solid legs with firestop on both sides. Composite Firestop Deflection Track System for use in fire-rated wall …


BlazeFrame® (JR 1)
… solid legs with fire stop on one side. Composite Firestop Deflection Track System for use in up to 2 hr rated shaft …


BlazeFrame® (DSL 2)
… slotted legs w/ firestop on both sides. Composite Firestop Deflection Track System for use in fire rated wall …


BlazeFrame® (ODL 2)
… solid legs with firestop on both sides. Composite Firestop Deflection Track System with "offset step" accommodates …


BlazeFrame® (SL 1)
… solid leg w/ firestop on slotted side. Composite Firestop Deflection Track System for use in fire rated wall …


BlazeFrame® (ODSL 2)
… lower legs with firestop on both sides. Composite Firestop Deflection Track System with "offset step" accommodates …


BlazeFrame® Perimeter L-Bead
… foot. When used in conjunction with BlazeFrame Fire Stop Deflection Track Systems , BlazeFrame Perimeter L-Bead is UL … (When used in conjunction with BlazeFrame Firestop Deflection Track Systems) IBC requires that fire-resistant …


SwiftClip™ 300 x 300 LA-Series Support Clip
SwiftClip™ 3" x 3" (LA-Series)
Pre-punched SwiftClips™ are used for multiple construction applications. 3" leg x 3" leg clips are commonly used for floor joist hangers and truss connections.


E-Screen (Drainage Mat)
… 95% open design creates a continuous capillary break and a channel for moisture to drain away from the wall system while … more cost effective and easier to install than traditional furring methods The 2-Ply design is comprised of a backer …


SwiftClip™ 150 x 300 LE-Series
… specifically in conjunction with structural studs and track. These labor time-savers include prepunched holes for … Product code Mils/Gauge Length Description LE543 54mils / 16GA 3-1/4" SwiftClip™ 1-1/2" x 3" LE-Series LE683 68mils / 14GA LE973 97mils / 12GA LE545 54mils / 16GA 5-1/2" LE685 68mils / 14GA LE975 97mils / 12GA LE547 …


Structural Studs
… 3”. Thickness: 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga). 33mil (20ga) and … framing products are produced with 33ksi steel. 54mil (16ga), 68mil (14ga) and 97mil (12ga) products are produced … comply with: Intertek CCRR-0206 - Structural Studs and Track SFIA Code Compliance Certification Program ICC-ES …


SwiftClip™ 150 x 150 LS-Series
… specifically in conjunction with structural studs and track. These labor time-savers include prepunched holes for … Product code Mils/Gauge Length Description LS543 54mils / 16GA 3-1/4" SwiftClip™ 1-1/2" x 1-1/2" LS-Series LS683 68mils / 14GA LS973 97mils / 12GA LS545 54mils / 16GA 5-1/2" LS685 68mils / 14GA LS975 97mils / 12GA LS547 …


Structural Track
… walls, curtain walls, tall interior partitions, floor joists and roof truss assemblies. … ClarkDietrich tracks are … Structural track is also used as end support closures for joists at exterior or foundation walls, head and sill plates …


DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applications
Also controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the expansion…


DEFS 45 Degree L-Bead
Trim component used to finish around window and door openings
Used as a backing for perimeter sealant application.


DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).


DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).


DEFS "F" Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applications
Also controls cracking in large areas of walls and ceilings at the juncture of dissimilar materials. The removable…


DEFS Starter Strip / Casing Bead
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead. Two rows of large perforations…


DEFS Starter Strip / Casing Bead with Drip
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
The drip leg assists in moving moisture away from the opening or the foundation walls.


DEFS Starter Strip with Drip and Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
The drip leg assists in directing moisture away from the opening or the foundation walls.


DEFS Starter Strip with Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead with weep holes to direct…


DEFS Muddable J-Bead
Designed to cover the raw edges of drywall board
For use in Direct-Applied Exterior Finish Systems (DEFS).


EIFS/DEFS Corner Bead
… of Plastics ASTM D648 - Standard Test Methods for Deflection Tempurature of Plastics Under Flexural Load in the …


EIFS/DEFS Bullnose Corner Bead
… of Plastics ASTM D648 - Standard Test Methods for Deflection Temperature of Plastics Under Flexural Load in the …


Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…


Miscellaneous Soffit Vent
One-piece soffit vent designed for soffit board
May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.


Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applications
Available with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…


Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areas
One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board.…


Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…


Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occur
Vent clips are provided to connect reveal sections and to assist in…


Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…


Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.


Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature control
This vent is intended for surface-mount applications. Always use a rigid backing or…


Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aesthetic
The slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air…


Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.


Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flange allow the base coat mixture to easily flow through and bond with the substrate.


"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with…


Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.


Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.


Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.


EIFS/DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applications
Also controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…


Prefabricated Panel Edge
Designed for systems that are manufactured into panels for job installation
Includes the ClarkDietrich Keylock™ Splice for connecting multiple sections and to assist in alignment in Exterior…


Header Weeped Starter Track
Designed with front weep holes and a drip leg to move moisture away from opening headers
Supplied with a disposable protective strip to prevent clogging during base coat application.


Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legs
Sloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture…


Starter Strip / Casing Bead
Heavy-duty, base support starter strips and perimeter casing beads
For Exterior Insulation Finish Systems (EIFS), the perforated flanges allow the base coat mixture to easily flow through and bond…


Weeped Starter Track
One-piece support starter track designed with weep holes and an extended drip leg
Moves moisture away from opening headers in Exterior Insulation Finish Systems (EIFS).


Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing bead
For use in Exterior Insulation and Finish Systems (EIFS).


Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side
Designed with weep holes on the front side to move moisture away from openings in Exterior…


Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back side
Designed with weep holes on the back side to move moisture away from openings in Exterior…


Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip leg
Designed with weep holes on the front side and a drip leg to move moisture away…


Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior Insulation Finish…


Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.


Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizes
Perimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been…


Wide Flange Corner Bead
Wide Flange Corner reinforcement
Wide Flange Corner Bead is designed for deep fills, irregular corners, and for use in conditions, requiring two layers of 5/8" drywall.


Bullnose Archmaker™ Corner Bead
True, uniform, curved, or arched corner reinforcement with a bullnose design.
Conforms to most arched and curved designs.


Bullnose Corner Bead
3/4" radius bullnose provides hard-to-damage, rust-proof corners
Designed for use in high-traffic areas.


Casing Bead / Plaster Stop
Used to neatly terminate stucco and plaster
Terminates stucco and plaster against windows, doors and other dissimilar materials.


Control Joint
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings
Flat flange for thinner, 1-Coat applications.


Archmaker™ Corner Bead
Provides true, uniform, curved, or arched reinforcement
Conforms to most arched and curved designs.


Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.


3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stop
Install on frame construction where stucco and foundation walls meet.


Control Joint with Removable Tape
Recommended for smooth finishes
Removable tape protects the deep "V" groove during construction. J-hooks on the ground help reduce plaster shrinkage.


E-Flange™ Control Joint
PVC Control Joint with Embeddable Flange design
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings. Specially designed connector clips are provided…


Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.


Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit Vent
For stucco and plaster with vertical edge clips provided for special installations.


Misc. Soffit Vents (6", 4", 3", 2", 1-1/2" and 1")
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco
Vent clips are provided to connect the soffit vents and assist in alignment.


Soffit Vents (Three-Piece)
Continuous three-piece Soffit Vent
For stucco and plaster.


Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit Vent
For stucco and plaster.


FCS Soffit Vent
Available in several grounds and widths
Can be ordered with the 300VFZ clip for installation.


Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersection
When a drip and soffit vent need to be combined.


Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control joint
Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.


"F" Series Control Joint and Vent
Designed to work on narrow overhangs
Where vents are needed to go against fascia or walls.


"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco
3/4" elongated vent holes.


Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco
3/4" elongated vent holes.


Bullnose X Corner Beads
3/4" radius bullnose corner bead that includes a shorter 1-1/2" flange for narrow returns
Designed for use in high-traffic areas.


Irregular Leg Corner Bead
Provides damage-resistant, rust-proof, and straight corners
Designed with a shorter, 1-1/2" flange for narrow returns.


"F" Control Joint (with removable tape)
Recommended for smooth finishes
Removable tape protects deep "V" expansion slot during construction.


E-Corner Bead
Fully Embedded Corner Bead
Provides reinforcement like welded-wire or woven wire laths.


Inside Corner Control Joint
Used to straighten an inside corner
For a neat, straight edge.


Inside Control Joint (with removable tape)
Designed to relieve stress caused by expansion and contraction
In wall and ceiling inside angles.


Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.


Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.


Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.


1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined


1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stop
Install on masonry construction where stucco and foundation walls meet.


1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stop
Install on frame construction where stucco and foundation walls meet.


Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.


Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combined
To assist with moving moisture away from the wall.


Bandmaker™ Series Casing Bead
Designed with a reinforcing rib
Assists in keying heavy material fills when bands are used in architectural designs.


BM 66 Series 1-Piece Bandmaker™
Provides a one-piece band, saving labor time
Additional band widths available.


Archmaker™ Casing Bead
Designed to easily conform to most arched and curved designs
Works for curved bands on walls as well.


Archmaker™ / Bandmaker™ Casing Bead
Designed to easily conform to most arched and curved designs
With a reinforcing rib to assist in keying heavy material fills.


Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials


Extra Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials


Casing Bead with Reveal
Designed to terminate stucco and plaster
At window or door openings to create a reveal.


Double Ground (Bandmaker™ Series)
Finish from the ground on both sides of the band
The grounds on both sides act as a guide for finishing smooth transitions. Perforated flanges allow for more secure attachment.


Expansion Joints (Slip Joint) 1/2" Reveal
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.


Wide Expansion Joints (Slip Joint) 1/2" Reveal
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.


F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.


M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.


M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.


F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.


Soffit Vents (One-Piece)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster with a perforated flange.


Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside corners
Parts come preassembled, and may require field alignment.


Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside corners
Parts come preassembled, and may require field alignment.


Standard Corner Bead
Provides hard-to-damage, rust-proof, and straight corners
Open triangles on the flanges allow for full embedment.


Drip Flashing
Designed to be used above window and door openings or at the foundation line
To assist with moving moisture away from the wall.


Archmaker™ Drip Flashing - 2" Flange
Designed to be used above window and door openings or at the foundation line
To assist with moving moisture away from the wall.


Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in stucco…


Straight and Mitered Connector Clips (for Soffit Vents)
Assists in the alignment of soffit vents
Connects multiple sections.


DS15 Drip
Used with drip screed and as drip in special conditions
Such as soffits, balconies, etc.


Connector Clips (for Control Joints)
Designed to assist in the alignment of control joints
And to provide a base for caulking.


Connector Clips (for Channel Reveals)
Designed to be used with channel reveals as a base for sealants
And to assist in alignment.


Angle Casing Beads
Terminates stucco and plaster against doors, windows and other dissimilar materials
Provides a tapered transition.


"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designs
Formed at the juncture of dissimilar materials.


Original BackerBead®
Combination PVC Casing Bead with built-in closed cell backer rod
Eliminates the need to install a backer rod separately, as the product features a factory-applied backer rod that is affixed to the…


BackerBead® with Rip-Bead®
1/4" removable leg provides a clean, stucco-free caulk gap
Assures efficient caulk seal for optimal moisture protection.


BackerBead® with Short Flange
Casing Bead with factory applied blue backer rod
BackerBead® with Short Flange is perfect for situations where the standard 1-3/4" flange size is too large for the application. Factory-applied blue…


BackerBead® Drip Flashing - 3-1/2" Flange
Drip flashing with built-in closed cell backer rod
BackerBead® Drip Flashing - 3-1/2" Flange is designed to provide positive drainage above exterior window and door openings while also providing a…


E-Flange™ Casing Bead
Designed to terminate stucco and plaster against doors, windows and dissimilar materials
Improves stucco embedment by more than 80% versus standard "flat flange" products.


BackerBead® with E-Flange™
Combination PVC Casing Bead with built-in closed cell backer rod
Factory-applied, closed-cell backer rod provides a sealed separation gap 1/4" wide where stucco abuts dissimilar materials such as…


E-Flange™ Bandmaker™ Casing Bead
PVC CASING BEAD WITH EMBEDDABLE FLANGE DESIGN
E-Flange Bandmaker™ Casing Bead is designed with a reinforcing rib to assist in keying heavy material fills when "bands" are used in architectural…


E-Flange™ Casing Bead with Drip
E-FLANGE™ CASING BEAD with drip
PVC Casing Bead with embeddable flange design designed to terminate stucco and plaster with a moisture trap. ClarkDietrich E-Flange embeddable stucco profiles provide…


CI Weep Track
Directs water drainage
Designed to be used with #1 Corner Bead around windows and doors and at the foundation line.


Drip Casing
Drip leg directs moisture away from openings and foundation walls
Designed to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May…


ClarkDietrich Shaftwall Systems
… Tech Datasheet / Submittal Product Code Description Deflection 5 PSF 7.5 PSF 10 PSF 15 PSF 250CT-21 2-1/2" 21mils …
Specifying the Right Framing Connectors for Deflection
… February 2020 Specifying the Right Framing Connectors for Deflection When it comes to deflection, the performance of the connections between the … . … Specifying the Right Framing Connectors for Deflection …
New Universal Bypass Clip from ClarkDietrich Offers Two-In-One Rigid and Deflection Connection to Exterior Curtain Walls
… to the building structure whether the design calls for a deflection connection for vertical movement independent of … standoff to ensure a plumb wall plane. When used for a deflection application, Universal Bypass Clips allow vertical … of up to 3" (1-1/2" up and 1-1/2"down). Proprietary deflection screws are provided with each clip to ensure …
Fire-Rated System Technical Support
… Codes? UL 2079 - Fourth Edition UL 2079 - Fifth Edition Deflection? Is total deflection the same as deflection gap? Not at all. You'll need to know your projects …
Specifying the Optimal Head of Wall Framing Assembly for Your Next Project
… framing or slab-to-slab framing. Where this occurs, a deflection joint (or gap) is required if the wall framing … compression or extension movement of the structure. The deflection joint is the distance between the top of the stud … Traditional Double Track One method of incorporating deflection into head of wall framing is a double track …
CDBS Introduces New Drift FastClip for Exterior Curtain Walls
… and quantities needed to keep projects moving.” FastClip Deflection Screws are included with each clip for attachment … These connectors allow for 2” (1” up and down) vertical deflection, while the 14-gauge bushing provide 2” lateral deflection (1” left and right). ClarkDietrich deflection …
ClarkDietrich Custom BIM Framing Tools
… and ProTRAK® families into Revit and MWF’s walls. Top Deflection Track Selection Tool This selection tool allows the user to add a diverse lineup of top deflection track systems into their Revit MWF walls. Systems … Leg, Structural Deep Leg, MaxTrak® and MaxTrak 2D Slotted Deflection Track and BlazeFrame® Fire Stop Deflection Track …
ClarkDietrich Adds New Option for Passive Fire Protection With BlazeFrame® RipTRAK™
… RipTRAK is a UL-approved fire-rated head-of-wall deflection track for both roof and wall assemblies. Available … over the primary wall board material for a high degree of deflection. “Fire safety issues remain one of the most … any stud to track connection while still allowing deflection. About ClarkDietrich® ClarkDietrich® is the …
“Conversations With ClarkDietrich” Series Launches With Head-of-Wall Session at MAREK
… head-of-wall solutions including: UltraBEAD ; Deep Leg Deflection Track with YurClip ; Deep Leg Deflection Track with Fast Top™ Clip ; and DoubleTrack™ Deflection Track . Attendees were able to interact with the …
New UL Listing Reveals ClarkDietrich BlazeFrame® RipTRAK™ as Sole Option For Head of Wall Joint Systems Without the Need For Castle Cuts or Sealants
… BlazeFrame RipTRAK is a UL-tested fire-rated head-of-wall deflection track for both roof and wall assemblies. Available … over the primary wall board material for a high degree of deflection. BlazeFrame RipTRAK meets UL 2079, 5th edition; … any stud to track connection while still allowing deflection. About ClarkDietrich® ClarkDietrich® is the …
Custom BIM Framing Tools from ClarkDietrich Now Part of Metal Wood Framer (MWF) Pro Wall Software Package
… Families into Revit and MWF’s walls. Top Deflection Track Selection Tool This selection tool allows the user to add a diverse lineup of top deflection track systems into their Revit MWF walls. Systems … Leg, Structural Deep Leg, MaxTrak® and MaxTrak 2D Slotted Deflection Track and BlazeFrame® Fire Stop Deflection Track …
Join us at the 2014 INTEX EXPO in Las Vegas, NV - Booth #405
… new Trakloc® Steel Framing System, BlazeFrame Fire Stop Deflection Track System, ClarkDietrich iTools and all our …
ClarkDietrich Grows Fire-Rated Head-of-Wall Product Line With New UltraBEAD
… here . When used in conjunction with UltraTRAK slotted deflection track or Deep Leg deflection tracks, ClarkDietrich UltraBEAD provides a 1or 2 …
ClarkDietrich launches new ClipExpress Catalog and Product Link Icons
… industry’s widest and most cost-effective array of rigid, deflection, bridging, and general-purpose clips, connectors, …
JOIN US AT THE 2015 INTEX EXPO AND/OR BIMFORUM EXPO APRIL 29-30TH
… new Trakloc® Steel Framing System , BlazeFrame Fire Stop Deflection Track System , ClarkDietrich iTools and all our …
ClarkDietrich Expands Product Offering with Acquisition of TRAKLOC®
… also allows for inter-floor live-load and seismic induced deflection movement in the stud without the need for a special deep leg or slotted deflection track. TRAKLOC is design-listed by INTERTEK and …
General Cold-Formed Steel Framing FAQs
… property for strength, not for stiffness or resistance to deflection. Generally speaking, 50ksi material tends to be … with 50ksi material unless otherwise noted. What allowable deflection should be specified for curtain wall applications? … The main purpose of specifying an allowable stud deflection for curtain wall framing is actually for …
Missed us at the 2015 INTEX and/or BIMForum Expo? Find out what you missed.
… new Trakloc® Steel Framing System , BlazeFrame Fire Stop Deflection Track System , ClarkDietrich iTools and all …
Project Team Specifies ClarkDietrich Framing Products to Construct New City Hall
… the ProSTUD ® Drywall Framing System , MaxTrak ® Slotted Deflection Track , and Danback ® Flexible Wood Backing System … from bridging connections to drift connections to deflection connections, ClarkDietrich has a solution for it …
Q&A with Brett Hironimus
… clips, which are a combination of existing rigid and deflection product lines. ClarkDietrich recently introduced a … Drift Rail and Clip system that allows for drift, deflection and rigid connection all in one. This innovation …
Join us at the AIA 2012 National Convention in Denver on June 20-22ND
… ClarkDietrich will be showcasing BlazeFrame Fire Stop Deflection Track System, CalrkDietrich iTools and our …
AIA Continuing Education
… with reliable, tested framing connections. Learn about deflection and drift clips, rigid connections and other … Number: DIE05Q Learning Objectives: Identify a variety of deflection and drift clips that are used to protect a … for UL 2079 and ASTM E1966 certification Determining deflection capacity and movement capability Hourly rating of …
New FastBridge Clip Provides Labor Savings for Contractors
… industry’s widest and most cost-effective array of rigid, deflection, bridging, and general-purpose clips, connectors, …
Clip Express℠
… ClipExpress Navigation System (Select on a system below) Deflection Connections Drift Connections Rigid Connections …
ClarkDietrich iTools
… service, including the industry’s widest selection of: Deflection Connections Rigid Connections Floor Framing …
New Online and Mobile Tool from ClarkDietrich™ Increases Efficiencies for Contractors and Architects
… service, including the industry’s widest selection of: Deflection Connections Rigid Connections Floor Framing …
TRAKLOC® Helps Revive Historic Jung Hotel
… Stud™ and corresponding TRAKLOC track and MaxTrak® Slotted Deflection Track products. The superintendent ordered this …
Pony Wall Connectors Offer Efficient Solution for Cleveland Dental Clinic
… 33MIL 33ksi to create a stiffer wall that would limit deflection. For more information about ClarkDietrich Pony …
Support Docs
… Evaluation Report Intertek CCRR-0205 - MaxTrak Slotted Deflection Track Intertek CCRR-0208 - FastClip & Extended …
ClarkDietrich Exhibits at Autodesk University 2015
… Drywall Framing System • BlazeFrame® Fire Stop Deflection Track System • RedHeader RO™ Rough Opening …
Project Gallery
… the ProSTUD ® Drywall Framing System , MaxTrak ® Slotted Deflection Track , and Danback ® Flexible Wood Backing System …
ClarkDietrich Wall Type Creator Help
… Wall (Braced @ 48"o.c.) Select Design Filters: Deflection (Recommend L/240) Lateral Load (Interior walls are …
Why Passive Fire Protection is Critical to Commercial Construction Plans
… One carpenter would install the BlazeFrame head of wall deflection tracks on each floor, and after HVAC ductwork was …
ClarkDietrich Hits the Road to Showcase Labor Saving Products at INTEX Expo
… , a one-piece slotted track that handles head-of-wall deflection with fewer hassles and components. RedHeader Pro™ …
ClarkDietrich Engineering Services Instrumental in Design of New, Next-Generation Porsche Dealership
… from the floor above would not be acceptable. As such, the deflection of the primary structure needed to be accommodated …
Engineering Services BIM Project Gallery
… ProSTUD® Drywall Framing System and MaxTrak® slotted deflection track. Correct products and installation methods …