Search
Products
Strait-Flex® IS-300
DESIGNED FOR INSIDE 90° CORNERS, WHERE LARGE FRAMING IRREGULARITIES NEED TO BE OVERCOMEIS-300 is designed for 90-degree inside corners where speed and strength are needed and/or where large framing…
Strait-Flex® Arch-Stick
composite arched corner BEAD
Designed for outside 90° arched corners, eliminating flat spots.
Strait-Flex® Big-Stick
Designed for high traffic, outside 90° cornersThe easiest corner bead on the market to install and repair.
Strait-Flex® Wet-Stick
composite water-activated adhesiveDesigned for outside 90° corners without the need of compound or fasteners.
Strait-Flex® Original
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Original is a versatile, multi-purpose drywall corner bead available in 100 ft. rolls.
Strait-Flex® Medium
Finishes INSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Medium is a high-performance drywall corner bead.
Strait-Flex® Arch-Flex
DESIGNED FOR COMPOUND ARCHES AND DOUBLE CURVE APPLICATIONS
Arch-Flex is designed for compound arches and double curve applications, including arched windows and doors, ceilings, soffits, staircases…
Strait-Flex® Gold
High-Performance Drywall Corner BeadStrait-Flex Gold is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Strait-Flex® Mid-Flex
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Mid-Flex is a muddable, paper-faced composite, flexible corner bead that adjusts to any angle to create perfect inside and outside 90…
Chamfered Corner Bead
Chamfered edge for a modern look
Designed with a 3/4" chamfered edge at the corner to provide a modern look and shadowing effect.
PRO-90 Jumbo Corner Bead
Straight, rust-proof, dent-resistant corners where a wider flange is needed.
Designed with extra wide, 1-3/4" flanges to cover two layers of 5/8" drywall.
3/4" Inside Corner Cove
3/4" radius, inside corner cove
Designed to complement the outside corners created by the bullnose corner bead.
Adjustable Inside Corner Trim
Inside Corner Trim
Adjustable inside corner hinge with shoulders designed to keep the corner straight during installation.
PRO-90 Combi Bead
Straight to curve arches
Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.
Strait-Flex® Perfect-90°™
Finishes inside 90° and off-angle corners
Perfect-90º™ ensures a clean, sharp corner without the risk of damage from a taping knife.
Strait-Flex® Ammo-Flex
Designed for bazooka® applications
Loads into any Bazooka® for fast applications of intricate off-angles or inside 90º corners.
Strait-Flex® Uno-Bead 222
DESIGNED FOR replacing or repairing metal corner beadUno-Bead222 is Ideal for drywall, thin-coat plaster applications.
Strait-Flex® Wet-Flex
Designed AS A WATER-ACTIVATED OUTSIDE 90° AND OUTSIDE OFF-ANGLE CORNER BEAD ON A ROLL
Water-activated adhesive on inside of roll.
PRO-Bull 3/4" Archway
For finishing arches, curvatures and most radii with a rounded bullnose look3/4" radius bullnose corner bead (VBAB) designed with slotted flange that easily forms to curves and arches with a soft,…
Strait-Flex Wide-Flex
FINISHES INSIDE AND outside 90° AND OFF-ANGLE CORNERSStrait-Flex Wide-Flex is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-…
1-1/2" Bullnose Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
Bullnose Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
PRO-Bull 3/4" Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
PRO-Bull 3/4" Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
3/4" Splayed Inside Corner Cove
3/4" radius, splayed inside corner cove
Designed to complement ClarkDietrich vinyl 3/4" bullnose splayed corner bead. Adjustable from 120° to 140° for off-angle inside corner conditions.
Strait-Flex® OS-400
DESIGNED for outside 90° corners where large voids and irregularities occurDiamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.
PRO-Bull 3/4" Corner Bead
Used to create elegant, contemporary, rounded 90° drywall cornersPRO-Bull 3/4" radius bullnose provides soft, rounded aesthetic to outside corners.
Pro-Flex300™
Finishes inside 90° and off-angle cornersPro-Flex300™ is a muddable, PVC-Free, flexible corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Zinc Mini-Bead™ 800 and 900
Corner reinforcementZinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges…
Paper-Faced Corner Bead
Lowering Labor Costs by removing one coat of compoundPaper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective,…
Paper-Faced Square Nail-On Corner Bead (CD1-UB)
Provides square drywall corners and is used when nailing or mechanical fastening is desiredPaper-faced nail-on beads combine galvanized metal corner and edge protection with high-grade paper to…
Paper-Faced Bullnose Splayed Nail-On
Used to provide rounded 135° outside drywall corners when nailing or mechanical fastening is desired or requiredOff-angle nail-on bullnose bead, also known as splayed bullnose or 135° bullnose corner…
Paper-Faced Bullnose Splayed Tape-on
Provides rounded 135° outside drywall corners for a contemporary "modern" lookOff-angle bullnose tape-on bead, also known as splayed bullnose or 135° bullnose corner bead is used to provide a rounded…
Paper-Faced Bullnose Tape-on
Creates elegant, rounded outside drywall corners adding contemporary styling and a sense of openness to any room3/4" tape-on bullnose corner bead is used to create a smooth, rounded look to standard…
Paper-Faced Inside Bullnose Corner
Creates subtle, smooth, inside bullnose cornersTape-on inside bullnose 90° paper-faced corner bead provides subtle, rounded inside corners.
Paper-Faced Inside Corner Bead
Provides incredibly straight and smooth inside 90° corners for drywall finishingRigid steel-reinforced inside corners provide a durable guide to achieve exceptionally straight and sharp inside…
Paper-Faced Inside Splayed Corner Bead
Used to create a sharp, crisp line for finishing inside off-angle or inverted splayed cornersOff-angle tape-on 135° inside or reverse splayed bead is used to achieve a crisp, clean, straight finished…
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
PRO-90 Corner Bead
Impact-resistant vinyl corner reinforcementPRO-90 Corner Bead is an extra rigid vinyl corner bead designed for stiffness and strength. A slight radius on the nose makes for easy, smooth finishing.
PRO-90 Archway
Used to finish arches, curvatures and most radius conditionsPRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius…
Bullnose Corner Bead
Used to create elegant, contemporary, rounded 90° drywall cornersBullnose Corner Bead is used to create subtle dimension and softens the look of outside corners. PRO-Bull 3/4" also available for…
Bullnose Kerfed Corner Bead
Creates a rounded or bullnose paintable finish around door and window trims
Bullnose kerfed corner bead is designed with a return leg that can be inserted into the channel of door and window jambs.
Bullnose Archway Corner Bead
Bullnose archway corner bead3/8" Bullnose Archway Corner Bead is used to create subtle dimension and softens the look of an arching outside corner.
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Bullnose Corner Bead
Creates elegant, rounded outside drywall cornersBullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Bullnose adds contemporary styling and a sense of openness…
Clinch-On Dull Corner Bead
Premier drywall finishing beadClinch-On Corner Bead is recognized as the premier product for providing sturdy metal reinforcement on 90° drywall corners.
GhostBead™ Bullnose Corner Bead
ghostbead™ bullnose corner bead seamlessly blends with joint compoundClarkDietrich GhostBead™ Bullnose metal corner bead is primed with a white surface treatment to blend in with joint compound, and…
GhostBead™ Square Corner Bead
ghostBead™ Square Corner Bead seamlessly blends with joint compoundClarkDietrich GhostBead™ metal corner bead is primed with a white surface treatment to blend in with joint compound. This…
Clinch-On Hot-Dipped Corner Bead
Hot-dipped steel reinforcement for long-lasting, corrosion-resistant drywall corner protectionHot-dipped corner bead provided by Clinch-On Products, Co. offers the identical roll-formed precision as…
Mini-Bead™ 800 and 900
Provides superior keying for joint compound for one-coat plaster veneer systemsMini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat…
Quicksilver™ Corner Bead
Hot-Dipped METAL CORNER BEAD Quicksilver™ corner bead is used to achieve outside 90° corners.
Splayed Corner Bead
Superior finish and reinforcement for off-angle drywall corners135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
West Coast Corner Bead
West coast Corner BeadClarkDietrich west coast corner bead is used to provide a professional finish and protection at drywall corners. This traditional drywall finishing product is nailed,…
Paper-Faced Bullnose Nail-On
Provides elegant and contemporary rounded drywall corners and is used when nailing or mechanical fastening is desired3/4" nail-on bullnose corner bead is used to create a smooth, rounded look to…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
Paper-Faced Splayed Corner Bead
High-performance off-angle tape-on bead is ideal for finishing 135° offset cornersOff-angle tape-on bead, also known as splayed or 135° corner bead, is used to provide a strong, smooth finish for…
103 Deluxe® Corner Bead
Dull-Finish Metal Corner BeadClarkDietrich 103 Deluxe® corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is…
3/8" Radius Splayed Bullnose Corner Bead
3/8" Radius Bullnose splayed corner bead3/8" Radius Bullnose Splayed Corner Bead is designed for off-angle outside corners conditions.