Search
Products
Extended Uni-Clip™ (UXRC6-HD) w/Anchor Holes
connects exterior studs to the primary structure of the building, while resisting horizontal and vertical loadsClarkDietrich’s UXRC6-HD 68mils (14ga) rigid framing clip is used to attach exterior…
FastClip™ Slide Clips (FCSC)
Provide for vertical building movement up to 3"ClarkDietrich FastClip™ Slide Clip deflection clips are used to attach exterior curtain-wall studs to the building structure and provide for …
Fast Strut™ (FS12, FS15, FS18, FS20, FS22, FS24)
Used for large standoff conditionsClarkDietrich Fast Strut™ curtain-wall connector employs the Fast Clip™ technology for curtain-wall stud attachment and is commonly used when large stand-off…
Drift Rail (DR97) and Clip (DRC)
UNIVERSAL 2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONSClarkDietrich Drift Rail 97mil (12ga) and Clip 97 mil or 68mil (12ga or 14ga) is a uniquely designed two-piece system that is used…
Flat Tail™ Slide Clip (FTSC)
Allows for vertical building movement and provides a horizontal standoff
ClarkDietrich Flat Tail™ Slide Clip is used to attach exterior curtain-wall studs to the building structure and provide for 2…
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
EIFS/DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front sideDesigned with weep holes on the front side to move moisture away from openings in Exterior…
Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back sideDesigned with weep holes on the back side to move moisture away from openings in Exterior…
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior…
Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip legDesigned with weep holes on the front side and a drip leg to move moisture away…
Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legsSloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture away…
Prefabricated Panel Edge
Designed for systems that are manufactured into panels for job installation
Includes the ClarkDietrich Keylock™ Splice for connecting multiple sections and to assist in alignment in Exterior…
Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing beadFor use in Exterior Insulation and Finish Systems (EIFS).
Weeped Starter Track
One-piece support starter track designed with weep holes and an extended drip legMoves moisture away from opening headers in Exterior Insulation Finish Systems (EIFS).
Header Weeped Starter Track
Designed with front weep holes and a drip leg to move moisture away from opening headers
Supplied with a disposable protective strip to prevent clogging during base coat application.
Drip Casing
Drip leg directs moisture away from openings and foundation wallsDesigned to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be…
#36 Sill Screed
Exterior Foundation sill screedA variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Colored Vinyl
Color LeadershipIn addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
093 Zinc Control Joint (ZNCJ)
Drywall or veneer plaster control jointClarkDietrich 093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve the stresses of expansion and contraction of drywall and…
Zinc Control Joints #38, #50 & #75
Resists corrosion on applications of plaster and stucco
A solid flange zinc control joint that resists corrosion on interior and exterior applications of plaster and stucco. The #38, #50 & # 75…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Zinc Mini-Bead™ 800 and 900
Corner reinforcementZinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges…
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Universal Bypass Clips (UBC)
Provides either a rigid connection OR vertical building movement up to 3”.
Universal Bypass Clips are used to attach exterior curtain wall studs to the building structure and provide either a rigid…
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight.
EIFS/DEFS Bullnose Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizesPerimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been engineered…
Starter Strip / Casing Bead
Heavy-duty, base support starter strips and perimeter casing beadsFor Exterior Insulation Finish Systems (EIFS), the perforated flanges allow the base coat mixture to easily flow through and bond to…
CI Weep Track
Directs water drainageDesigned to be used with #1 Corner Bead around windows and doors and at the foundation line.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combinedUsed to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combinedPre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrierThis is not a flashing; it is intended for use in combination with…
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
EasyClip™ S-Series™ Support Clip
Are used to secure U-channel (cold-rolled channel) to framing members for lateral bridging and for miscellaneous rigid connections.
This high-performance, multi-use utility clip is ideal for corner…
Extended Uni-Clip™ (UXRC)
14 Gauge Rigid Connection ClipClarkDietrich’s Extended Uni-Clip™ rigid framing clip is used to attach exterior wall studs to the structure of the building.
Extended SwiftClip™ LE-Series
USED In rigid attachments of wall studs to the structureClarkDietrich’s Extended SwiftClip™ LE-Series rigid framing clip is used to attach exterior wall studs to the structure of the building.
Drift FastClip™ Slide Clip (D-FCSC)
Vertical and lateral building movement up to 2"
ClarkDietrich Drift FastClip™ Slide Clips 68mils (14ga) or 97mils (12ga) are used to attach exterior curtain-wall studs to the building structure and…
FastClip™ Slide Clip (FCSC-HD) w/Anchor Holes
Vertical building movement up to 3"ClarkDietrich FCSC-HD 68mils (14ga) is used to attach exterior curtain-wall studs to the building concrete structure and provide for vertical building movement…
Drift Headed Rail (DHR97) and Drift Clips (DRC)
2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONS for cast-in-placeClarkDietrich Drift Headed Rail (DHR-97) and Drift Clip 97 mils or 68mils (12ga or 14ga) is a uniquely designed two-piece…
Uni-Clip™ End Clip (UCEC)
14 Gauge rigid connection clip
ClarkDietrich’s Uni-Clip™ framing clip is a universal framing clip used to attach and support numerous rigid framing conditions.
SwiftClip™ 150 x 150 LS-Series
SwiftClip™ 1-1/2" x 1-1/2" (LS-Series)
1-1/2" leg x 1-1/2" leg fixed/ridged connection clip.
SwiftClip L-Series support clips are used in multiple construction projects, specifically in conjunction…
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Fixed Universal Slip Clip (FUS)
10 and 12 Gauge FIXED universal slip clipIdeal for medium to larger standoff conditions.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows over…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Mini-Bead™ 800 and 900
Provides superior keying for joint compound for one-coat plaster veneer systemsMini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat…
Extended FastClip™ (FCEC)
Provides for vertical building movement up to 3” and is commonly used for large standoff conditionsExtended FastClip™ Slide Clip™ (FCEC) 68mils (14ga) deflection clips (also available in 12ga)…