Search
Products
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
F-Bead
Covers raw edges of drywallDesigned to cover raw edges of drywall and provide a 1/2" horizontal extension.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
V Truss - Walls & Ceilings
Wall & Ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Rip-Bead® Flat L-Bead
Cover raw edges of drywallDesigned for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco &…
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
Structa Fusion
One Coat lath reinforcingStructa Fusion One Coat is an alternate to 20 gauge woven wire for One-Coat stucco applications. Fusion combines expanded metal with welded wires to create unique patented…
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
Stainless Steel Dimpled Self-Furring Lath
1/4" self-furring, dimpled, stainless steel Plaster and Stucco BaseA stainless steel, self-furring expanded dimpled metal lath ideal for exterior use over concrete or UL fire-rated sheathing, masonry…
Partition End Caps
Quickly finishes doorways, knee walls and wall endsFinish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.