Search
Products
Spazzer® Bar Fly Clip (SFLY)
Eliminates the need for cutting and bending when using the Spazzer® 5400 Spacer Bar to facilitate rapid installation of exterior curtain wall framing
The Spazzer bar fly clip is a secure, fast and…
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
Spazzer® Bar Guard™ (SPBG)
Used to secure the Spazzer bar when used in load-bearing applicationsThe Spazzer Bar Guard™ retainer clip is used to secure the Spazzer bar when used in load-bearing applications.
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside cornersParts come preassembled, and may require field alignment.
Universal Header Hanger (H-Series)
used to connect box headers to jambs or beams to columns
The H-Series™ Universal Header Hanger is used to connect box headers to jambs or beams to columns and transfer large vertical loads.
#40 Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
HDSC Header Bracket
Header Clip for RedHeader PRO™ and HDS Framing Systems
The HDSC Header Bracket (HDSC) is the perfect complement to the RedHeader PRO™ and HDS® Framing system. This simple, yet innovative header…
Header Cripple Stud Clip
Eliminates the header track material and is a more economical alternative
ClarkDietrich Moment Clip (MC Series)
Moment connection for knee walls and shear walls to the structure foundation.
ClarkDietrich moment clips are high-performance, cost effective solutions for knee wall-to-foundation connections and…
EasyClip™ A-Series™ End Clip
Used in knee wall connections or to reinforce jamb stud connections at the primary frame
EasyClip™ A-Series™ End Clips are most commonly used to reinforce connections in knee-wall applications or to…
EasyClip™ U-Series™ Clip Angles
used to Secure U-channel to wall studs for lateral bridging
EasyClip™ U-Series™ Clip Angles are used to secure U-channel to wall studs for lateral bridging or for miscellaneous rigid connections.
EasyClip™ X-Series™ Clip Angles
Used to secure U-channel to wall studs for lateral bridgingEasyClip™ X-Series™ Clip Angles have extra long legs (2" x 2") and are used to secure U-channel to wall studs for lateral bridging.
Gusset Plates (G-Series & GP-Series)
Punched Or Unpunched Gusset Plates
Gusset plates for easier and faster attachments of X-Bracing or roof framing
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
V Truss - Walls & Ceilings
Wall & Ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Structa Fusion
One Coat lath reinforcingStructa Fusion One Coat is an alternate to 20 gauge woven wire for One-Coat stucco applications. Fusion combines expanded metal with welded wires to create unique patented…
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
"DX" Expansion Joint
Control cracking in large areas of wallboardProvides stress relief and assists in the controlling of cracking across large areas of wallboard.
Extended Uni-Clip™ (UXRC)
14 Gauge Rigid Connection ClipClarkDietrich’s Extended Uni-Clip™ rigid framing clip is used to attach exterior wall studs to the structure of the building.
EasyClip™ E-Series™ Support Clip
Feature a long leg to accommodate greater standoff for rigid connections.EasyClip™ E-Series™ Support Clips are used for rigid stand-off connections.
EasyClip™ S-Series™ Support Clip
Are used to secure U-channel (cold-rolled channel) to framing members for lateral bridging and for miscellaneous rigid connections.This high-performance, multi-use utility clip is ideal for corner…
Extended SwiftClip™ LE-Series
USED In rigid attachments of wall studs to the structureClarkDietrich’s Extended SwiftClip™ LE-Series rigid framing clip is used to attach exterior wall studs to the structure of the building.
SwiftClip™ 150 x 150 LS-Series
SwiftClip™ 1-1/2" x 1-1/2" (LS-Series)1-1/2" leg x 1-1/2" leg fixed/ridged connection clip.SwiftClip L-Series support clips are used in multiple construction projects, specifically in conjunction…
SwiftClip™ 150 x 300 LE-Series
SwiftClip™ 1-1/2" x 3" (LE-Series)1-1/2” leg x 3” leg fixed/rigid connection clipSwiftClip support clips are used in multiple construction projects, specifically in conjunction with structural studs…
SwiftClip™ 300 x 300 LA-Series Support Clip
SwiftClip™ 3" x 3" (LA-Series)Pre-punched SwiftClips™ are used for multiple construction applications. 3" leg x 3" leg clips are commonly used for floor joist hangers and truss connections.
Uni-Clip™ End Clip (UCEC)
14 Gauge rigid connection clipClarkDietrich’s Uni-Clip™ framing clip is a universal framing clip used to attach and support numerous rigid framing conditions.
304 or 316 Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or contoured…
304 or 316 Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
304 or 316 Stainless Steel Dimpled Self-Furring Lath
When the highest levels of corrosion resistance are requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
MEP Gusset Plate
ReSTORES structural integrity of steel framing with field modified openingsThe MEP Gusset Plate is designed to provide strength and stiffness to framing members that are modified or field cut at the…
Strut Plate
ClarkDietrich Strut Plate connects steel studs to other studs, beams, or columns while allowing vertical movement and preventing load transfer. It enables direct fastening when aligned with the stud…
MEP Flange Repair
ReSTORES structural integrity of steel framing with field modified openingsThe MEP Flange Repair Clip is designed to provide strength and stiffness to framing members that are modified or field cut…
Bridging Termination Clip (BTC3,BTC4,BTC6)
U-Channel Lateral Bracing ClipThe ClarkDietrich Bridging Termination clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural wall studs when used in load-bearing or curtain wall…
CC33 3/4" Channel Clip
33mil (20 Gauge) Lateral Bracing Clip used to secure 3/4" U-Channel to drywall studsThe ClarkDietrich CC33 clip is used to secure U-Channel or Cold Rolled Channel (CRC) to non-structural wall studs.
Universal Bypass Clips (UBC)
Provides either a rigid connection OR deflection movement up to 3”.Universal Bypass Clips are used to attach exterior curtain wall studs to the building structure and provide either a rigid…
Pony Wall
Partial wall framing connection to floorThe ClarkDietrich Pony Wall is intended to support out-of-plane loading of cantilevered partial wall systems that are unsupported at the top track.
Drift Rail (DR97) and Clip (DRC)
UNIVERSAL 2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONSClarkDietrich Drift Rail 97mil (12ga) and Clip 97 mil or 68mil (12ga or 14ga) is a uniquely designed two-piece system that is used…
Extended Uni-Clip™ (UXRC6-HD) w/Anchor Holes
connects exterior studs to the primary structure of the building, while resisting horizontal and vertical loadsClarkDietrich’s UXRC6-HD 68mils (14ga) rigid framing clip is used to attach exterior…
Drift Headed Rail (DHR97) and Drift Clips (DRC)
2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONS for cast-in-placeClarkDietrich Drift Headed Rail (DHR-97) and Drift Clip 97 mils or 68mils (12ga or 14ga) is a uniquely designed two-piece…
Box Header Clip
Pre-punched Clip for box header FramingThe Box Header Clip (BHC) is designed to eliminate field cutting metal track into sections. The BHC clip is pre-punched to promote a quick and accurate…
FastBridge™ Clip (FB33, FB43 & FB68)
Used to secure u-channel to wall studs for lateral bracingThe ClarkDietrich FastBridge™ clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural or non-structural wall studs when…
CD Holdown
SECURE AND HOLD DOWN SHEAR WALLS TO THE STRUCTURE FOUNDATIONClarkDietrich holdowns provide cost-effective shearwall attachment and are used to transfer tension loads between floors or from structural…
Holdown Plate (HDP)
SECURE AND HOLD DOWN structural steel endposts between floors or TO THE FOUNDATIONClarkDietrich HDP holdown plates provide cost-effective shearwall attachment and are used to transfer tension loads…
Fixed Universal Slip Clip (FUS)
10 and 12 Gauge FIXED universal slip clipIdeal for curtain wall/bypass conditions.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside cornersParts come preassembled, and may require field alignment.
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
Universal Strut Connector (USC)
Used for large standoff conditionsThe Universal Strut Connector (USC) is a single connector for long stand-off curtain wall connections. It works for both deflection and rigid applications, making…
CB Clip
A snap-on clip solution that creates a secure framework for fast, efficient drywall installation around columns and beams.
EasyClip™ D & T-Series™ Anchor Clips
Provide cost effective tie-down solutions for knee walls, shear walls and truss connectionsThe EasyClip™ D-Series™ & T-Series™ Anchor Clips are high-performance, cost effective solutions for knee…