Search
Products
FastClip™ Slide Clips (FCSC)
Provide for vertical building movement up to 3"ClarkDietrich FastClip™ Slide Clip deflection clips are used to attach exterior curtain-wall studs to the building structure and provide for …
Fast Strut™ (FS12, FS15, FS18, FS20, FS22, FS24)
Used for large standoff conditionsClarkDietrich Fast Strut™ curtain-wall connector employs the Fast Clip™ technology for curtain-wall stud attachment and is commonly used when large stand-off…
Drift Rail (DR97) and Clip (DRC)
UNIVERSAL 2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONSClarkDietrich Drift Rail 97mil (12ga) and Clip 97 mil or 68mil (12ga or 14ga) is a uniquely designed two-piece system that is used…
TradeReady® Floor Joist Blocking
Quick and efficient system that prevents joist rotation and accommodates mechanical passing
TradeReady Floor Joist Blocking is one of the primary components that make up the TradeReady floor bracing…
Flat Tail™ Slide Clip (FTSC)
Allows for vertical building movement and provides a horizontal standoff
ClarkDietrich Flat Tail™ Slide Clip is used to attach exterior curtain-wall studs to the building structure and provide for 2…
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
F-Bead
Covers raw edges of drywallDesigned to cover raw edges of drywall and provide a 1/2" horizontal extension.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
Commercial Strapping
Multipurpose pre-punched commercial coil stock used for bracing, bridging or tension strapping
Coil Strapping is made in a variety of widths, each with a unique layout of pre-punched holes…
Flat Strapping
Multipurpose flat stock used for bracing, bridging or tension strapping
Flat Strapping is made in a variety of widths and thicknesses to meet different application requirements.
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Rip-Bead® Flat L-Bead
Cover raw edges of drywallDesigned for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.
Universal Bypass Clips (UBC)
Provides either a rigid connection OR vertical building movement up to 3”.
Universal Bypass Clips are used to attach exterior curtain wall studs to the building structure and provide either a rigid…
SwiftClip™ 150 x 300 LE-Series
SwiftClip™ 1-1/2" x 3" (LE-Series)
1-1/2” leg x 3” leg fixed/rigid connection clip
SwiftClip support clips are used in multiple construction projects, specifically in conjunction with structural…
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trussesKatz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
TradeReady® Rim Track Splice Plate (TDSP)
Ideal for splicing rim joist and is easily field skewable for off-angle rim joist connections
The Field Skewable TradeReady® Rim Track Splice Plate provides an easy and efficient method for splicing…
EasyClip™ S-Series™ Support Clip
Are used to secure U-channel (cold-rolled channel) to framing members for lateral bridging and for miscellaneous rigid connections.
This high-performance, multi-use utility clip is ideal for corner…
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Skewable Angle
FOR RIGID AND OFF-ANGLE ATTACHMENTS OF JOIST-TO-JOIST, JOIST-TO-HIP BEAM, OR TO OTHER STRUCTURAL STEEL MEMBERS
ClarkDietrich Skewable Angles are used to make rigid attachments of joist-to- joist or…
Drift FastClip™ Slide Clip (D-FCSC)
Vertical and lateral building movement up to 2"
ClarkDietrich Drift FastClip™ Slide Clips 68mils (14ga) or 97mils (12ga) are used to attach exterior curtain-wall studs to the building structure and…
FastClip™ Slide Clip (FCSC-HD) w/Anchor Holes
Vertical building movement up to 3"ClarkDietrich FCSC-HD 68mils (14ga) is used to attach exterior curtain-wall studs to the building concrete structure and provide for vertical building movement…
Universal Joist Hanger (UJH)
Floor joists connection to structural steel beams or CFS headersThe Universal Joist Hangers (UJH) are used to connect joists to CFS headers and steel I-beams.
EasyClip™ Quick Twist Web Stiffener
Provide reinforcement at critical load points to prevent web crippling
(QTWS) EasyClip™ Quick Twist Web Stiffeners are used to provide reinforcement of joist webs to prevent crippling.
Drift Headed Rail (DHR97) and Drift Clips (DRC)
2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONS for cast-in-placeClarkDietrich Drift Headed Rail (DHR-97) and Drift Clip 97 mils or 68mils (12ga or 14ga) is a uniquely designed two-piece…
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
Drift Head-of-Wall (DHW)
Head-of-wall drift and deflection for exterior curtain wall and interior, nonload-bearing wallsClarkDietrich Drift Head-of-wall clips are used in deflection conditions for in-fill curtain wall…
Partition End Caps
Quickly finishes doorways, knee walls and wall endsFinish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.
Fast Top™ Clip (FTC)
Used in head-of-wall deflection conditions for exterior curtain wall and interior, nonload-bearing walls
ClarkDietrich Fast Top™ Clips are used in head-of-wall deflection conditions for in-fill…
Uni-Clip™ End Clip (UCEC)
14 Gauge rigid connection clip
ClarkDietrich’s Uni-Clip™ framing clip is a universal framing clip used to attach and support numerous rigid framing conditions.
EasyClip™ E-Series™ Support Clip
Feature a long leg to accommodate greater standoff for rigid connections.
EasyClip™ E-Series™ Support Clips are used for rigid stand-off connections.
SwiftClip™ 150 x 150 LS-Series
SwiftClip™ 1-1/2" x 1-1/2" (LS-Series)
1-1/2" leg x 1-1/2" leg fixed/ridged connection clip.
SwiftClip L-Series support clips are used in multiple construction projects, specifically in conjunction…
Bridle Hanger (CDBV, CDMB)
for attaching floor joists to structural steel beams or wood ledgers
Bridle Hangers are commonly used to attach light-gauge C-joists to structural steel beams or wood ledgers.
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
TradeReady® Structural Bridging (TDSB)
Provides a quick and efficient method to prevent joist rotation
TradeReady® structural blocking is the third component of the TradeReady® steel floor system. Structural blocking is pre-cut to fit…
Fixed Universal Slip Clip (FUS)
10 and 12 Gauge FIXED universal slip clipIdeal for medium to larger standoff conditions.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
Extended FastClip™ (FCEC)
Provides for vertical building movement up to 3” and is commonly used for large standoff conditionsExtended FastClip™ Slide Clip™ (FCEC) 68mils (14ga) deflection clips (also available in 12ga)…
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.