Search
Products
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stuccoThe DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
L-Angle / Corner Angle
L-angle / corner angle
Non-structural corner angles commonly used to connect, reinforce or secure metal stud framing in various drywall applications.
Structural L-Angle commonly used for connection…
Structural Track
ClarkDietrich Cold-Formed Steel TrackU-shaped channel runners used as the top and bottom tracks to secure wall studs or end support closures for floor joist framing. Structural Steel Track can be…
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
#15 Double-V Control Joint
Expanded flange control joint#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint…
#15 Zinc Double-V Control Joint
CORROSION RESISTANT EXPANDED FLANGE CONTROL JOINT#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V…
#XJ15 Double-J Control Joint
Expanded flange control joint with a taped reveal for a clean finish#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
DEFS "F" Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings at the juncture of dissimilar materials. The removable…
#30 Corner Master™ Control Joint
Expanded flange inside corner control joint
#30 Corner Master™ Expansion/Contraction Control Joint (Double-V) is designed to provide stress relief at inside corner intersections on plaster walls.…
"F" Control Joint (with removable tape)
Recommended for smooth finishesRemovable tape protects deep "V" expansion slot during construction.
Control Joint and Reveal Combinations
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilingsAlso creating 1/4" to 1-1/2" reveal in Stucco.
Inside Corner Control Joint
Used to straighten an inside cornerFor a neat, straight edge.
Inside Control Joint (with removable tape)
Designed to relieve stress caused by expansion and contractionIn wall and ceiling inside angles.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
#XJ15 Zinc Double-J Control Joint
Corrosion resistant Expanded flange control joint with a taped reveal#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
093 Zinc Control Joint (ZNCJ)
Drywall or veneer plaster control jointClarkDietrich 093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve the stresses of expansion and contraction of drywall and…
Zinc Control Joints #38, #50 & #75
Resists corrosion on applications of plaster and stuccoA solid flange zinc control joint that resists corrosion on interior and exterior applications of plaster and stucco. The #38, #50 & # 75 is…
Structural Studs
ClarkDietrich Cold-Formed Steel C-Studs (C-Series™)Cold-Formed / Light-Gauge C-shaped framing members for axial load-bearing walls, curtain walls, tall interior partitions, floor joists and roof…
U-Channel (CRC)
Traditional cold-rolled Channel (CRC) for bridging
ClarkDietrich U-Channel or Cold Rolled Channel (CRC) are one of the most common bridging methods used to provide resistance to stud rotation and…
093 Vinyl Control Joint
Used to relieve expansion and contraction stresses093 Control Joint provides stress relief and assists in controlling cracking in large areas of wallboard.
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standardsMiter cuts are made with precision to ensure proper fit at all connections.
Furring Channel / Hat Channel
Furring Channel for Walls and CeilingsEconomical hat-shaped framing component used to “furr” out ceilings and masonry walls.
PilotTRAK
PilotTrakClarkDietrich PilotTRAK is a structural U-shaped framing component. PilotTRAK can also be used in box-headers, door jambs, axial loadbearing walls, curtainwalls, tall interior…
ProChannel Ci™ Vertical
Continuous insulation Rainscreen Framing systemProChannel Ci Vertical Cladding Support System is a thermally and structurally efficient exterior wall cladding support system utilizing the self-…
ProChannel Ci™
Continuous insulation Rainscreen Framing systemProChannel Ci™ Cladding Support System is a thermally and structurally efficient exterior wall cladding support system utilizing the self-sealing Grip-…
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
FAS-093X Fire Rated Control Joint
FAS-093X fire rated control joint - profile for protection of control jointsFire Rated Control Joint is a composite control joint with intumescent tape factory applied to the back side of the control…
Z-Girt for Rainscreen Framing
Z Girt for RainScreen framingGalvanized Z-Girt with standard depths to match common exterior insulation thicknesses. Can be installed in a vertical or horizontal orientation to accommodate…
PanelTRAK
Steel Track for direct web bearingPanelTRAK is a structural steel track that allows steel studs to bear directly on the track web rather than the radii of the track corners. Because…
Control Joint
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilingsFlat flange for thinner, 1-Coat applications.
E-Flange™ Control Joint
PVC Control Joint with Embeddable Flange designDesigned to relieve stress and assist in controlling cracking in large areas of walls and ceilings. Specially designed connector clips are provided for…
Control Joint with Removable Tape
Recommended for smooth finishesRemovable tape protects the deep "V" groove during construction. J-hooks on the ground helps reduce the effect of plaster shrinkage.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
EIFS/DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…