Search
Products
Spazzer® Bar Fly Clip (SFLY)
Eliminates the need for cutting and bending when using the Spazzer® 5400 Spacer Bar to facilitate rapid installation of exterior curtain wall framing
The Spazzer bar fly clip is a secure, fast and…
Spazzer® Bar Guard™ (SPBG)
Used to secure the Spazzer bar when used in load-bearing applications
The Spazzer Bar Guard™ retainer clip is used to secure the Spazzer bar when used in load-bearing applications.
Spazzer® Snap-In Grommet (SPGR)
used to secure the Spazzer® bar
The Spazzer® Snap-In Grommet should be used to secure the Spazzer bar when used in load-bearing applications
FastBridge™ Clip (FB33, FB43 & FB68)
Used to secure u-channel to wall studs for lateral bracing
The ClarkDietrich FastBridge™ clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural or non-structural wall studs when…
Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco &…
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
CC33 3/4" Channel Clip
33mil (20 Gauge) Lateral Bracing Clip used to secure 3/4" U-Channel to drywall studs
The ClarkDietrich CC33 clip is used to secure U-Channel or Cold Rolled Channel (CRC) to non-structural wall studs.
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
BlazeFrame® Shield
33mil, 43mil or 54mil Fire Shield System
ClarkDietrich’s BlazeFrame Shield is specifically designed for use in conjunction with approved fireblocking materials per section 718 of the IBC.
Grommets
Grommets for Steel Wall Stud Framing
Grommets protect and isolate electrical wiring and plumbing from contacting metal.
Furring Channel / Hat Channel
Furring Channel for Walls and Ceilings
Economical hat-shaped framing component used to “furr” out ceilings and masonry walls.
Z-Furring Channel
Furring Channel for Walls and Ceilings
Easily accommodates rigid insulation and provides for the attachment of gypsum wallboard, veneer or plaster to the interior of masonry walls.
Spazzer® 9200 Spacing and Bridging Bar (SPZD)
Facilitates the rapid erection of interior, nonload-bearing studs
Prenotched bridging and spacing bar.
Spazzer® 5400 Spacing and Bridging Bar
Facilitates the rapid erection of structural wall framing
ClarkDietrich TradeReady® Spazzer® 5400 spacer bar is a pre-notched, 16-gauge or 18-gauge, galvanized steel spacer and bridging bar,…
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trusses
Katz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
L-Angle / Corner Angle
L-angle / corner angle
Non-structural corner angles commonly used to connect, reinforce or secure metal stud framing in various drywall applications.
Structural L-Angle commonly used for connection…
U-Channel (CRC)
Traditional cold-rolled Channel (CRC) for bridging
ClarkDietrich U-Channel or Cold Rolled Channel (CRC) are one of the most common bridging methods used to provide resistance to stud rotation and…
Flat Strapping
Multipurpose flat stock used for bracing, bridging or tension strapping
Flat Strapping is made in a variety of widths and thicknesses to meet different application requirements.
Bridging Termination Clip (BTC3,BTC4,BTC6)
U-Channel Lateral Bracing Clip
The ClarkDietrich Bridging Termination clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural wall studs when used in load-bearing or curtain wall…
Commercial Strapping
Multipurpose pre-punched commercial coil stock used for bracing, bridging or tension strapping
Coil Strapping is made in a variety of widths, each with a unique layout of pre-punched holes…
BlazeFrame Flute Cover (FC)
Flute cover (Fc) profile cover for under fluted decks
Corrugated strap for horizontal use to span fluted areas of unprotected or protected metal decks in up to 2 hr rated assemblies.
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
360TRAK™
Interior Nonload-Bearing Flexible Track360TRAK™ is a flexible framing product that is a high-performance solution for creating intricate curves, bends, and variable radii for dramatic and…
Structural Studs
ClarkDietrich Cold-Formed Steel C-Studs (C-Series™)Cold-Formed / Light-Gauge C-shaped framing members for axial load-bearing walls, curtain walls, tall interior partitions, floor joists and roof…
TRAKLOC® Drywall Framing System
Telescopes in length to deal with variances during installationTRAKLOC® allows you to order one length member and “adjust” the length accordingly to make up for variances in the slab. The two-piece…
V Truss - Walls & Ceilings
wall & ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Pony Wall
Partial wall framing connection to floorThe ClarkDietrich Pony Wall is intended to support out-of-plane loading of cantilevered partial wall systems that are unsupported at the top track.
ProSTUD® Drywall Framing System
Steel Drywall Studs with smart edge™ technologyProSTUD Drywall Framing System (ProSTUD® and ProTRAK®) with Smart Edge™ Technology is the innovative steel drywall stud that sets a new industry…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Structalath III
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco cladding and is a part of the ClarkDietrich Easy Embedment System.
Twin Trac
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.