Search
Products
Casing Bead / Plaster Stop
Used to neatly terminate stucco and plaster
Terminates stucco and plaster against windows, doors and other dissimilar materials.
Strait-Flex® Arch-Stick
composite arched corner BEAD
Designed for outside 90° arched corners, eliminating flat spots.
Strait-Flex® Big-Stick
Designed for high traffic, outside 90° corners
The easiest corner bead on the market to install and repair.
Strait-Flex® Medium
Finishes INSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Medium is a high-performance drywall corner bead.
Strait-Flex® Arch-Flex
DESIGNED FOR COMPOUND ARCHES AND DOUBLE CURVE APPLICATIONS
Arch-Flex is designed for compound arches and double curve applications, including arched windows and doors, ceilings, soffits, staircases…
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control joint
Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco
May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applications
Available with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areas
One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board.…
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occur
Vent clips are provided to connect reveal sections and to assist in…
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature control
This vent is intended for surface-mount applications. Always use a rigid backing or…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Can-Patch (Residential)
Can light patch (residential)
Pre-cut 6-1/4" hole fits standard residential ceiling lights and can light receptacles.
Can-Patch (Commercial)
Can light patch (commercial)
Pre-cut 6-1/4" hole fits standard commercial ceiling lights and can light receptacles.
Strait-Flex® X-Crack
Framing AlignmentEliminates ceiling cracks and straightens uneven framing.
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior…
Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing bead
For use in Exterior Insulation and Finish Systems (EIFS).
Drip Casing
Drip leg directs moisture away from openings and foundation walls
Designed to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May…
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
#66N Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
#66N Zinc Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
Extra Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
Casing Bead with Reveal
Designed to terminate stucco and plaster
At window or door openings to create a reveal.
Soffit Vents (One-Piece)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit Vent
For stucco and plaster with vertical edge clips provided for special installations.
FCS Soffit Vent
Available in several grounds and widths
Can be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersection
When a drip and soffit vent need to be combined.
Strait-Flex® Butt-Tape
Designed for fast, flat, butt-jointsVertical and horizontal butt-joints and commercial “Top-Out” applications.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
#66X Zinc Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
#66X Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
E-Flange™ Casing Bead
Designed to terminate stucco and plaster against doors, windows and dissimilar materialsImproves stucco embedment by more than 80% versus standard "flat flange" products.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
V Truss
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.