Search
Products
Spazzer® Bar Fly Clip (SFLY)
Eliminates the need for cutting and bending when using the Spazzer® 5400 Spacer Bar to facilitate rapid installation of exterior curtain wall framing
The Spazzer bar fly clip is a secure, fast and…
Spazzer® Bar Guard™ (SPBG)
Used to secure the Spazzer bar when used in load-bearing applications
The Spazzer Bar Guard™ retainer clip is used to secure the Spazzer bar when used in load-bearing applications.
Spazzer® Snap-In Grommet (SPGR)
used to secure the Spazzer® bar
The Spazzer® Snap-In Grommet should be used to secure the Spazzer bar when used in load-bearing applications
FastBridge™ Clip (FB33, FB43 & FB68)
Used to secure u-channel to wall studs for lateral bracing
The ClarkDietrich FastBridge™ clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural or non-structural wall studs when…
Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco &…
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
CC33 3/4" Channel Clip
33mil (20 Gauge) Lateral Bracing Clip used to secure 3/4" U-Channel to drywall studs
The ClarkDietrich CC33 clip is used to secure U-Channel or Cold Rolled Channel (CRC) to non-structural wall studs.
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
BlazeFrame® Shield
33mil, 43mil or 54mil Fire Shield System
ClarkDietrich’s BlazeFrame Shield is specifically designed for use in conjunction with approved fireblocking materials per section 718 of the IBC.
Mini-Bead™ 800 and 900
Provides superior keying for joint compound for one-coat plaster veneer systemsMini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat…
Spazzer® 9200 Spacing and Bridging Bar (SPZD)
Facilitates the rapid erection of interior, nonload-bearing studs
Prenotched bridging and spacing bar.
Spazzer® 5400 Spacing and Bridging Bar
Facilitates the rapid erection of structural wall framing
ClarkDietrich TradeReady® Spazzer® 5400 spacer bar is a pre-notched, 16-gauge or 18-gauge, galvanized steel spacer and bridging bar,…
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trusses
Katz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
Flat Strapping
Multipurpose flat stock used for bracing, bridging or tension strapping
Flat Strapping is made in a variety of widths and thicknesses to meet different application requirements.
Bridging Termination Clip (BTC3,BTC4,BTC6)
U-Channel Lateral Bracing Clip
The ClarkDietrich Bridging Termination clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural wall studs when used in load-bearing or curtain wall…
Commercial Strapping
Multipurpose pre-punched commercial coil stock used for bracing, bridging or tension strapping
Coil Strapping is made in a variety of widths, each with a unique layout of pre-punched holes…
E-Screen (Drainage Mat)
Rainscreen Drainage MatClarkDietrich E-Screen can be used in stucco, stone veneer, brick, or under various siding installations to provide an effective method for drainage and ventilation in the wall…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Cornerite™
Reinforcement for inside or outside cornersCornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Connector Clips (for Control Joints)
Designed to assist in the alignment of control joints
And to provide a base for caulking.
Straight and Mitered Connector Clips (for Soffit Vents)
Assists in the alignment of soffit vents
Connects multiple sections.
Connector Clips (for Channel Reveals)
Designed to be used with channel reveals as a base for sealants
And to assist in alignment.
DS15 Drip
Used with drip screed and as drip in special conditions
Such as soffits, balconies, etc.
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
V Truss - Walls & Ceilings
wall & ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Colored Vinyl
Color LeadershipIn addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Structalath III
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco cladding and is a part of the ClarkDietrich Easy Embedment System.
Twin Trac
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standardsMiter cuts are made with precision to ensure proper fit at all connections.