Search
Products
Spazzer® Bar Fly Clip (SFLY)
Eliminates the need for cutting and bending when using the Spazzer® 5400 Spacer Bar to facilitate rapid installation of exterior curtain wall framing
The Spazzer bar fly clip is a secure, fast and…
EIFS/DEFS Bullnose Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
DEFS Starter Strip with Drip and Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS) The drip leg assists in directing moisture away from the opening or the foundation walls.
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openingsUsed as a backing for perimeter sealant application.
DEFS Muddable J-Bead
Designed to cover the raw edges of drywall boardFor use in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Spazzer® Bar Guard™ (SPBG)
Used to secure the Spazzer bar when used in load-bearing applicationsThe Spazzer Bar Guard™ retainer clip is used to secure the Spazzer bar when used in load-bearing applications.
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
DEFS "F" Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings at the juncture of dissimilar materials. The removable…
Colored Vinyl
Color LeadershipIn addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
093 Zinc Control Joint (ZNCJ)
Drywall or veneer plaster control jointClarkDietrich 093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve the stresses of expansion and contraction of drywall and…
BlazeFrame® Perimeter L-Bead
VINYL L-Bead with Compressible FoamCreates an easy attachment that is attained with staples through the bead flange.
EasyClip™ U-Series™ Clip Angles
used to Secure U-channel to wall studs for lateral bridging
EasyClip™ U-Series™ Clip Angles are used to secure U-channel to wall studs for lateral bridging or for miscellaneous rigid connections.
EasyClip™ X-Series™ Clip Angles
Used to secure U-channel to wall studs for lateral bridgingEasyClip™ X-Series™ Clip Angles have extra long legs (2" x 2") and are used to secure U-channel to wall studs for lateral bridging.
BlazeFrame® (DL 1)
BLAZEFRAME (DL 1) deep legProfile with two solid legs w/ firestop on one side. Composite Firestop Deflection Track System for use in fire rated wall assemblies. Two solid legs supporting “free…
BlazeFrame® (JR 1)
BLAZEFRAME (JR 1) Shaftwall deep legProfile with two solid legs with fire stop on one side. Composite Firestop Deflection Track System for use in up to 2 hr rated shaft wall assemblies. One leg…
EasyClip™ S-Series™ Support Clip
Are used to secure U-channel (cold-rolled channel) to framing members for lateral bridging and for miscellaneous rigid connections.This high-performance, multi-use utility clip is ideal for corner…
SwiftClip™ 150 x 150 LS-Series
SwiftClip™ 1-1/2" x 1-1/2" (LS-Series)1-1/2" leg x 1-1/2" leg fixed/ridged connection clip.SwiftClip L-Series support clips are used in multiple construction projects, specifically in conjunction…
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
BlazeFrame® RipTRAK™ Shaftwall
head-of-wall deflection track - 1 & 2 hour systemBlazeFrame RipTRAK Shaftwall is a ceiling runner with an offset shoulder that represents the thickness of the wall material (5/8"…
Bridging Termination Clip (BTC3,BTC4,BTC6)
U-Channel Lateral Bracing ClipThe ClarkDietrich Bridging Termination clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural wall studs when used in load-bearing or curtain wall…
CC33 3/4" Channel Clip
33mil (20 Gauge) Lateral Bracing Clip used to secure 3/4" U-Channel to drywall studsThe ClarkDietrich CC33 clip is used to secure U-Channel or Cold Rolled Channel (CRC) to non-structural wall studs.
FastBridge™ Clip (FB33, FB43 & FB68)
Used to secure u-channel to wall studs for lateral bracingThe ClarkDietrich FastBridge™ clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural or non-structural wall studs when…
BlazeFrame® (SL 1)
BLAZEFRAME (SL 1) SLOTTED one SIDEProfile with one slotted leg and one solid leg w/ firestop on slotted side. Composite Firestop Deflection Track System for use in fire rated wall assemblies.…
Drip Casing
Drip leg directs moisture away from openings and foundation wallsDesigned to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be…
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
EIFS/DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
DEFS Starter Strip / Casing Bead
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)Standard DEFS base support starter strip or as a perimeter casing bead. Two rows of large perforations…
DEFS Starter Strip with Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)Standard DEFS base support starter strip or as a perimeter casing bead with weep holes to direct…
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight.
DEFS Starter Strip / Casing Bead with Drip
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS) The drip leg assists in moving moisture away from the opening or the foundation walls.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrierThis is not a flashing; it is intended for use in combination with…
DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
ClarkDietrich Shaftwall Systems
Fully tested and approved assemblies for shaftwall constructionProvides maximum flexibility to choose from a variety of board manufacturers.