Search
Products
BackerBead® Drip Flashing - 3-1/2" Flange
Drip flashing with built-in closed cell backer rodBackerBead® Drip Flashing - 3-1/2" Flange is designed to provide positive drainage above exterior window and door openings while also providing a…
Strait-Flex® Arch-Stick
composite arched corner BEAD
Designed for outside 90° arched corners, eliminating flat spots.
Strait-Flex® Big-Stick
Designed for high traffic, outside 90° cornersThe easiest corner bead on the market to install and repair.
Strait-Flex® Medium
Finishes INSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Medium is a high-performance drywall corner bead.
Strait-Flex® Arch-Flex
DESIGNED FOR COMPOUND ARCHES AND DOUBLE CURVE APPLICATIONS
Arch-Flex is designed for compound arches and double curve applications, including arched windows and doors, ceilings, soffits, staircases…
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Strait-Flex® Butt-Tape
Designed for fast, flat, butt-jointsVertical and horizontal butt-joints and commercial “Top-Out” applications.
Strait-Flex® X-Crack
Framing AlignmentEliminates ceiling cracks and straightens uneven framing.
V-Truss Corner
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front sideDesigned with weep holes on the front side to move moisture away from openings in Exterior…
Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back sideDesigned with weep holes on the back side to move moisture away from openings in Exterior…
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior…
Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip legDesigned with weep holes on the front side and a drip leg to move moisture away…
Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legsSloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture away…
Weeped Starter Track
One-piece support starter track designed with weep holes and an extended drip legMoves moisture away from opening headers in Exterior Insulation Finish Systems (EIFS).
#36 Sill Screed
Exterior Foundation sill screedA variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transitionFrom stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control jointAccomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finishHave built-in control joint to accommodate expansion/contraction of the separate substrates.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
Can-Patch (Commercial)
Can light patch (commercial)Pre-cut 6-1/4" hole fits standard commercial ceiling lights and can light receptacles.
Can-Patch (Residential)
Can light patch (residential)Pre-cut 6-1/4" hole fits standard residential ceiling lights and can light receptacles.
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stuccoThe DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight.
Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizesPerimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been engineered…
CI Weep Track
Directs water drainageDesigned to be used with #1 Corner Bead around windows and doors and at the foundation line.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combinedUsed to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combinedPre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrierThis is not a flashing; it is intended for use in combination with…
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Foundation Weep Screed
Moisture removal from stuccoActs as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
Structa Fusion
One Coat lath reinforcingStructa Fusion One Coat is an alternate to 20 gauge woven wire for One-Coat stucco applications. Fusion combines expanded metal with welded wires to create unique patented…
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
DS15 Drip
Used with drip screed and as drip in special conditionsSuch as soffits, balconies, etc.
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…