Search
Products
F-Bead
Covers raw edges of drywallDesigned to cover raw edges of drywall and provide a 1/2" horizontal extension.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control joint
Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
"F" Series Control Joint and Vent
Designed to work on narrow overhangs
Where vents are needed to go against fascia or walls.
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco
May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applications
Available with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areas
One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board.…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flange allow the base coat mixture to easily flow through and bond with the substrate.
Roll-Patches
continuous patch material
Continuous roll patch width allows material to be cut to any length.
Head-Patch
sprinkler head patch, standard and flush style
Pre-cut to fit standard sprinkler head safety caps.
Can-Patch (Residential)
Can light patch (residential)
Pre-cut 6-1/4" hole fits standard residential ceiling lights and can light receptacles.
Can-Patch (Commercial)
Can light patch (commercial)
Pre-cut 6-1/4" hole fits standard commercial ceiling lights and can light receptacles.
Strait-Flex® Tuff-Tape
Designed for strength and speed and as a paper tape replacement
Used in areas where humidity causes paper tape to fail.
Strait-Flex® Crack-Tape
Repairs persistant cracks in corners and on flat surfaces
Tested to be two times stronger than paper or mesh tapes.
Soffit Vents (One-Piece)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit Vent
For stucco and plaster with vertical edge clips provided for special installations.
FCS Soffit Vent
Available in several grounds and widths
Can be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersection
When a drip and soffit vent need to be combined.
Strait-Flex® Butt-Tape
Designed for fast, flat, butt-jointsVertical and horizontal butt-joints and commercial “Top-Out” applications.
Perma-Patch
multi-purpose drywall patchPerma-Patch quickly repairs doorknob damage to drywall and is ideal for mis-cut or relocation of receptacles, ceiling and can lights.
Outlet-Patch
electrical outlet patchOutlet-Patch repairs and reinforces mis-cuts or damaged areas around receptacle boxes.
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.