Search
Products
Casing Bead / Plaster Stop
Used to neatly terminate stucco and plaster
Terminates stucco and plaster against windows, doors and other dissimilar materials.
Splayed Corner Bead (CB12)
Superior finish and reinforcement for off-angle drywall corners
120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
Paper-Faced Inside Splayed Corner Bead
Used to create a sharp, crisp line for finishing inside off-angle or inverted splayed corners
Off-angle tape-on 120/135° inside or reverse splayed bead is used to achieve a crisp, clean, straight…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
Starter Strip / Casing Bead
Heavy-duty, base support starter strips and perimeter casing beads
For Exterior Insulation Finish Systems (EIFS), the perforated flanges allow the base coat mixture to easily flow through and bond…
DEFS Starter Strip / Casing Bead
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead. Two rows of large perforations…
DEFS Starter Strip with Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead with weep holes to direct…
DEFS Starter Strip / Casing Bead with Drip
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS) The drip leg assists in moving moisture away from the opening or the foundation walls.
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openings
Used as a backing for perimeter sealant application.
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
BackerBead® with Short Flange
Casing Bead with factory applied blue backer rod
BackerBead® with Short Flange is perfect for situations where the standard 1-3/4" flange size is too large for the application. Factory-applied blue…
Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side
Designed with weep holes on the front side to move moisture away from openings in…
Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back side
Designed with weep holes on the back side to move moisture away from openings in Exterior…
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior…
Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip leg
Designed with weep holes on the front side and a drip leg to move moisture…
Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legs
Sloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture…
Prefabricated Panel Edge
Designed for systems that are manufactured into panels for job installation
Includes the ClarkDietrich Keylock™ Splice for connecting multiple sections and to assist in alignment in Exterior…
Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing bead
For use in Exterior Insulation and Finish Systems (EIFS).
Weeped Starter Track
One-piece support starter track designed with weep holes and an extended drip leg
Moves moisture away from opening headers in Exterior Insulation Finish Systems (EIFS).
Header Weeped Starter Track
Designed with front weep holes and a drip leg to move moisture away from opening headers
Supplied with a disposable protective strip to prevent clogging during base coat application.
Drip Casing
Drip leg directs moisture away from openings and foundation walls
Designed to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May…
PRO-Bull 3/4" Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
PRO-Bull 3/4" Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
1-1/2" Bullnose Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
Bullnose Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
BackerBead® with Rip-Bead®
1/4" removable leg provides a clean, stucco-free caulk gap
Assures efficient caulk seal for optimal moisture protection.
#66N Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
#66N Zinc Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
Bandmaker™ Series Casing Bead
Designed with a reinforcing rib
Assists in keying heavy material fills when bands are used in architectural designs.
BM 66 Series 1-Piece Bandmaker™
Provides a one-piece band, saving labor time
Additional band widths available.
Archmaker™ Casing Bead
Designed to easily conform to most arched and curved designs
Works for curved bands on walls as well.
Archmaker™ / Bandmaker™ Casing Bead
Designed to easily conform to most arched and curved designs
With a reinforcing rib to assist in keying heavy material fills.
Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
Extra Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
Angle Casing Beads
Terminates stucco and plaster against doors, windows and other dissimilar materials
Provides a tapered transition.
Casing Bead with Reveal
Designed to terminate stucco and plaster
At window or door openings to create a reveal.
Double Flange Step Bead
Finish from the ground on both sides of the bandThe grounds on both sides act as a guide for finishing smooth transitions. Perforated flanges allow for more secure attachment.
Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizesPerimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been engineered…
#66X Zinc Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
#66X Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
E-Flange™ Casing Bead
Designed to terminate stucco and plaster against doors, windows and dissimilar materialsImproves stucco embedment by more than 80% versus standard "flat flange" products.
E-Flange™ Bandmaker™ Casing Bead
PVC CASING BEAD WITH EMBEDDABLE FLANGE DESIGNE-Flange Bandmaker™ Casing Bead is designed with a reinforcing rib to assist in keying heavy material fills when "bands" are used in architectural designs…
E-Flange™ Casing Bead with Drip
E-FLANGE™ CASING BEAD with dripPVC Casing Bead with embeddable flange design designed to terminate stucco and plaster with a moisture trap. ClarkDietrich E-Flange embeddable stucco profiles provide…
Structalath III
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco cladding and is a part of the ClarkDietrich Easy Embedment System.
BackerBead® with E-Flange™
Combination PVC Casing Bead with built-in closed cell backer rodFactory-applied, closed-cell backer rod provides a sealed separation gap 1/4" wide where stucco abuts dissimilar materials such as the…
Original BackerBead®
Combination PVC Casing Bead with built-in closed cell backer rodEliminates the need to install a backer rod separately, as the product features a factory-applied backer rod that is affixed to the…
V Truss
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Twin Trac
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
V Truss - Walls & Ceilings
wall & ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.