Search
Products
Outlet-Patch
electrical outlet patchOutlet-Patch repairs and reinforces mis-cuts or damaged areas around receptacle boxes.
Roll-Patches
continuous patch material
Continuous roll patch width allows material to be cut to any length.
V-Truss Corner
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Perma-Patch
multi-purpose drywall patchPerma-Patch quickly repairs doorknob damage to drywall and is ideal for mis-cut or relocation of receptacles, ceiling and can lights.
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
Stainless Steel Dimpled Self-Furring Lath
1/4" self-furring, dimpled, stainless steel Plaster and Stucco BaseA stainless steel, self-furring expanded dimpled metal lath ideal for exterior use over concrete or UL fire-rated sheathing, masonry…
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.