Search
Products
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Head-Patch
sprinkler head patch, standard and flush stylePre-cut to fit standard sprinkler head safety caps.
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openingsUsed as a backing for perimeter sealant application.
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.