Search
Products
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
F-Bead
Covers raw edges of drywallDesigned to cover raw edges of drywall and provide a 1/2" horizontal extension.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
E-Corner Bead
Fully Embedded Corner BeadProvides reinforcement like welded-wire or woven wire laths.
V-Truss Corner
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Bullnose X Corner Beads
3/4" radius bullnose corner bead that includes a shorter 1-1/2" flange for narrow returnsDesigned for use in high-traffic areas.
#30 Corner Master™ Control Joint
Expanded flange inside corner control joint
#30 Corner Master™ Expansion/Contraction Control Joint (Double-V) is designed to provide stress relief at inside corner intersections on plaster walls.…
Irregular Leg Corner Bead
Provides damage-resistant, rust-proof, and straight cornersDesigned with a shorter, 1-1/2" flange for narrow returns.
Standard Corner Bead
Provides hard-to-damage, rust-proof, and straight cornersOpen triangles on the flanges allow for full embedment.
Inside Corner Control Joint
Used to straighten an inside cornerFor a neat, straight edge.
Inside Control Joint (with removable tape)
Designed to relieve stress caused by expansion and contractionIn wall and ceiling inside angles.
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
Zinc Mini-Bead™ 800 and 900
Corner reinforcementZinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges…
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Rip-Bead® Flat L-Bead
Cover raw edges of drywallDesigned for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.
Cornerite™
Reinforcement for inside or outside cornersCornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from…
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight.
EIFS/DEFS Bullnose Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systemsThese corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
#1A Expanded Corner Bead
GALVANIZED STEEL Expanded flange corner bead for exterior cornersA solid nose, all-purpose exterior corner bead. Strong and economical with multiple general use purposes.
#2A Expanded Corner Bead
RIGID, Expanded flange corner bead for exterior cornersA more rigid expanded corner bead for reinforcing plaster/stucco corners when used with masonry and fire proofing beads and columns. The #2A…
Wide Flange Corner Bead
Wide Flange Corner reinforcementWide Flange Corner Bead is designed for deep fills, irregular corners, and for use in conditions, requiring two layers of 5/8" drywall.
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Bullnose Archmaker™ Corner Bead
True, uniform, curved, or arched corner reinforcement with a bullnose design.Conforms to most arched and curved designs.
Bullnose Corner Bead
3/4" radius bullnose provides hard-to-damage, rust-proof cornersDesigned for use in high-traffic areas.
Archmaker™ Corner Bead
Provides true, uniform, curved, or arched reinforcementConforms to most arched and curved designs.
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
Partition End Caps
Quickly finishes doorways, knee walls and wall endsFinish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
#1A Zinc Expanded Corner Bead
Expanded flange corner bead for exterior cornersA strong, all-purpose exterior corner bead with a solid nose and multiple general use purposes. The zinc finish provides superior corrosion resistance…
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside cornersParts come preassembled, and may require field alignment.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside cornersParts come preassembled, and may require field alignment.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.