Search
Products
BackerBead® with Short Flange
Casing Bead with factory applied blue backer rodBackerBead® with Short Flange is perfect for situations where the standard 1-3/4" flange size is too large for the application. Factory-applied blue…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
V-Truss Corner
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
V Truss - Walls & Ceilings
Wall & Ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
Foundation Weep Screed
Moisture removal from stuccoActs as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
Drift FastClip™ Slide Clip (D-FCSC)
Vertical and lateral building movement up to 2"ClarkDietrich Drift FastClip™ Slide Clips 68mils (14ga) or 97mils (12ga) are used to attach exterior curtain-wall studs to the building structure and…
304 or 316 Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Casing Bead / Plaster Stop
Used to neatly terminate stucco and plasterTerminates stucco and plaster against windows, doors and other dissimilar materials.
Drift Rail (DR97) and Clip (DRC)
UNIVERSAL 2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONSClarkDietrich Drift Rail 97mil (12ga) and Clip 97 mil or 68mil (12ga or 14ga) is a uniquely designed two-piece system that is used…
Original BackerBead®
Combination PVC Casing Bead with built-in closed cell backer rodEliminates the need to install a backer rod separately, as the product features a factory-applied backer rod that is affixed to the…
BackerBead® Drip Flashing - 3-1/2" Flange
Drip flashing with built-in closed cell backer rodBackerBead® Drip Flashing - 3-1/2" Flange is designed to provide positive drainage above exterior window and door openings while also providing a…
"DX" Expansion Joint
Control cracking in large areas of wallboardProvides stress relief and assists in the controlling of cracking across large areas of wallboard.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfacesCreates edge reveal when butting up to ceilings, base trim and other finished interior components.
Drip Flashing for Rainscreen - DFLRS
Designed to be used at the bottom of entangled mesh rainscreens.
Drift Headed Rail (DHR97) and Drift Clips (DRC)
2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONS for cast-in-placeClarkDietrich Drift Headed Rail (DHR-97) and Drift Clip 97 mils or 68mils (12ga or 14ga) is a uniquely designed two-piece…
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
Top Vent Track for Rainscreen - TVTRS
Designed to be used at the top of entangled mesh rainscreen assemblies.
Drift Head-of-Wall (DHW)
Head-of-wall drift and deflection for exterior curtain wall and interior, nonload-bearing wallsClarkDietrich Drift Head-of-wall clips are used in deflection conditions for in-fill curtain wall…
304 or 316 Stainless Steel Dimpled Self-Furring Lath
When the highest levels of corrosion resistance are requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
Drip Casing
Drip leg directs moisture away from openings and foundation wallsDesigned to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be…
Archmaker™ Drip Flashing - 2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
Colored Vinyl
Color LeadershipIn addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transitionFrom stucco, siding, stone over a brick ledge, at a wall transition.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows over…
BackerBead® with Rip-Bead®
1/4" removable leg provides a clean, stucco-free caulk gapAssures efficient caulk seal for optimal moisture protection.
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
#66X Zinc Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…