Search
Products
E-Flange™ Control Joint
PVC Control Joint with Embeddable Flange designDesigned to relieve stress and assist in controlling cracking in large areas of walls and ceilings. Specially designed connector clips are provided for…
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
Strait-Flex® Tuff-Tape
Designed for strength and speed and as a paper tape replacement
Used in areas where humidity causes paper tape to fail.
Strait-Flex® Crack-Tape
Repairs persistant cracks in corners and on flat surfaces
Tested to be two times stronger than paper or mesh tapes.
Strait-Flex® Tile-Tape®
Designed for tile, marble and granite and water and mold resistant
Produces straight, strong, and water-proof inside, outside and off-angle corners.
Strait-Flex® Butt-Tape
Designed for fast, flat, butt-jointsVertical and horizontal butt-joints and commercial “Top-Out” applications.
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
EIFS/DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the…
DEFS "F" Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applicationsAlso controls cracking in large areas of walls and ceilings at the juncture of dissimilar materials. The removable…
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standardsMiter cuts are made with precision to ensure proper fit at all connections.
#30 Corner Master™ Control Joint
Expanded flange inside corner control joint
#30 Corner Master™ Expansion/Contraction Control Joint (Double-V) is designed to provide stress relief at inside corner intersections on plaster walls.…
093 Zinc Control Joint (ZNCJ)
Drywall or veneer plaster control jointClarkDietrich 093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve the stresses of expansion and contraction of drywall and…
Zinc Control Joints #38, #50 & #75
Resists corrosion on applications of plaster and stucco
A solid flange zinc control joint that resists corrosion on interior and exterior applications of plaster and stucco. The #38, #50 & # 75…
"F" Control Joint (with removable tape)
Recommended for smooth finishesRemovable tape protects deep "V" expansion slot during construction.
Control Joint and Reveal Combinations
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilingsAlso creating 1/4" to 1-1/2" reveal in Stucco.
Inside Corner Control Joint
Used to straighten an inside cornerFor a neat, straight edge.
Inside Control Joint (with removable tape)
Designed to relieve stress caused by expansion and contractionIn wall and ceiling inside angles.
FAS-093X Fire Rated Control Joint
FAS-093X fire rated control joint - profile for protection of control jointsFire Rated Control Joint is a composite control joint with intumescent tape factory applied to the back side of the control…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stuccoThe DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combinedUsed to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combinedPre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Control Joint
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilingsFlat flange for thinner, 1-Coat applications.
Control Joint with Removable Tape
Recommended for smooth finishesRemovable tape protects the deep "V" groove during construction. J-hooks on the ground helps reduce the effect of plaster shrinkage.
Drum Channel Reveal (with perforated flanges)
Creates narrow 1/4" reveals in stucco and plaster surfaces
093 Vinyl Control Joint
Used to relieve expansion and contraction stresses093 Control Joint provides stress relief and assists in controlling cracking in large areas of wallboard.
#15 Double-V Control Joint
Expanded flange control joint#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint…
#15 Zinc Double-V Control Joint
CORROSION RESISTANT EXPANDED FLANGE CONTROL JOINT#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V…
#XJ15 Double-J Control Joint
Expanded flange control joint with a taped reveal for a clean finish#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
#XJ15 Zinc Double-J Control Joint
Corrosion resistant Expanded flange control joint with a taped reveal#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfacesClips are provided for alignment and as a base for sealants.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combinedTo assist with moving moisture away from the wall.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.