Search
Products
BackerBead® Drip Flashing - 3-1/2" Flange
Drip flashing with built-in closed cell backer rodBackerBead® Drip Flashing - 3-1/2" Flange is designed to provide positive drainage above exterior window and door openings while also providing a…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
V Truss - Walls & Ceilings
Wall & Ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Drip Casing
Drip leg directs moisture away from openings and foundation wallsDesigned to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be…
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stuccoThe DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combinedPre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
FastBack® Backing System (FBBC)
Universal design-Works with studs in either direction
The FastBack backing system features a universal design that works with studs in either direction—concealing fasteners on the face of the…
Notched Track
Notched track for blocking & backingNotched Track is generally used for joist blocking or horizontal backing in walls to allow support for cabinets, appliances etc.
Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco &…
Diamond Security Lath (for Plaster)
A Heavy-gauge lath for Enhanced protection from breachDiamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where…
Backer Bar
Quick, Easy InstallationThe Backer Bar was specifically designed to meet the demand for the attachment of multiple items and heavier items to interior partitions. Provides superior connection shear…
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
Drip Flashing for Rainscreen - DFLRS
Designed to be used at the bottom of entangled mesh rainscreens.
Structa Fusion
One Coat lath reinforcingStructa Fusion One Coat is an alternate to 20 gauge woven wire for One-Coat stucco applications. Fusion combines expanded metal with welded wires to create unique patented…
2x6 FR Blocking
PreCut Fire-retardant treated wood blockingThe 2x6 FR Blocking is precut with a dado groove to latch on to flange of nonstructural steel framing and span between wall partitions to provide…
Stainless Steel Dimpled Self-Furring Lath
1/4" self-furring, dimpled, stainless steel Plaster and Stucco BaseA stainless steel, self-furring expanded dimpled metal lath ideal for exterior use over concrete or UL fire-rated sheathing, masonry…
Archmaker™ Drip Flashing - 2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
Danback® Flexible Wood Backing
REDUCE STEEL STUD BACKING Labor costs BY UP TO 75%Danback® Flexible Wood Backing System, featuring D-Blaze® or FlamePRO® fire-retardant treated wood (FRT), has made wood backing installation easy and…
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.