Search
Products
MaxTrak® Slotted Deflection Track
Performance that stands up to deflection
For superior head-of-wall vertical deflection, and the added benefit of horizontal drift movement, ClarkDietrich has your answer.
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
BlazeFrame® Shield
33mil, 43mil or 54mil Fire Shield System
ClarkDietrich’s BlazeFrame Shield is specifically designed for use in conjunction with approved fireblocking materials per section 718 of the IBC.
BlazeFrame® RipTRAK™
head-of-wall deflection track - 1 & 2 hour system
BlazeFrame RipTRAK is a deflection track with an offset shoulder that represents the thickness of the gypsum board (5/8" or 1-1/4”). A…
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
UltraBead - Fire, Smoke & Sound
Vinyl L-Bead with Compressible Foam
UltraBEAD, when used in conjunction with UltraTRAK slotted deflection track or Deep Leg deflection tracks, provides joint protection up to ¾” for a 1 or 2 HR…
UltraTRAK Slotted System
Fire rated deflection assembly for interior partitions & curtain-wall framing
The UltraTRAK Slotted system utilizes a UltraTRAK slotted deflection track in conjunction with UltraBEAD …
UltraBEAD with Deep Leg Deflection Track
Fire rated deflection assembly for interior partitions & curtain-wall framing
The UltraBEAD with Deep Leg Deflection Track system utilizes a deep leg deflection track in conjunction…
ClarkDietrich Area Separation Wall Systems
Non-load bearing, 2-hour and 3-hour rated vertical wall assembliesThey provide fire-resistant protection between adjacent living units in apartment buildings, condominiums and townhouses.
ClarkDietrich Shaftwall Systems
Fully tested and approved assemblies for shaftwall constructionProvides maximum flexibility to choose from a variety of board manufacturers.
BlazeFrame Flute Cover (FC)
Flute cover (Fc) profile cover for under fluted decks
Corrugated strap for horizontal use to span fluted areas of unprotected or protected metal decks in up to 2 hr rated assemblies.
FAS-093X Fire Rated Control Joint
FAS-093X fire rated control joint - profile for protection of control joints
Fire Rated Control Joint is a composite control joint with intumescent tape factory applied to the back side of the…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
CI Weep Track
Directs water drainage
Designed to be used with #1 Corner Bead around windows and doors and at the foundation line.
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occur
Vent clips are provided to connect reveal sections and to assist in…
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature control
This vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aesthetic
The slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flange allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
#36 Sill Screed
Exterior Foundation sill screed
A variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
Control Joint and Reveal Combinations
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings
Also creating 1/4" to 1-1/2" reveal in Stucco.
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combined
To assist with moving moisture away from the wall.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
BlazeFrame® Perimeter L-Bead
VINYL L-Bead with Compressible FoamCreates an easy attachment that is attained with staples through the bead flange.
ProSTUD® Drywall Framing System
Steel Drywall Studs with smart edge™ technologyProSTUD Drywall Framing System (ProSTUD® and ProTRAK®) with Smart Edge™ Technology is the innovative steel drywall stud that sets a new industry…
BlazeFrame Tape
Self Adhering Intumescent TapeA 2mm thickness of cured intumescent material that can be adhered to metal profiles to provide an air and smoke seal.
BlazeFrame® (DL 1)
BLAZEFRAME (DL 1) deep legProfile with two solid legs w/ firestop on one side. Composite Firestop Deflection Track System for use in fire rated wall assemblies. Two solid legs supporting “free…
BlazeFrame® (DL 2)
BLAZEFRAME (DL 2) deep legProfile with two solid legs with firestop on both sides. Composite Firestop Deflection Track System for use in fire-rated wall assemblies. Two solid legs supporting “…
BlazeFrame® (DSL 2)
BLAZEFRAME (DSL 2) SLOTTED BOTH SIDESProfile with two slotted legs w/ firestop on both sides. Composite Firestop Deflection Track System for use in fire rated wall assemblies. Legs with slots…
BlazeFrame® (JR 1)
BLAZEFRAME (JR 1) Shaftwall deep legProfile with two solid legs with fire stop on one side. Composite Firestop Deflection Track System for use in up to 2 hr rated shaft wall assemblies. One leg…
BlazeFrame® (ODL 2)
BLAZEFRAME (ODL 2) offset deep legProfile with two solid legs with firestop on both sides. Composite Firestop Deflection Track System with "offset step" accommodates fireproofing up to 1-1/2"…
BlazeFrame® (ODSL 2)
BLAZEFRAME (ODSL 2) offset deep legProfile with two slotted lower legs with firestop on both sides. Composite Firestop Deflection Track System with "offset step" accommodates fireproofing up to…
BlazeFrame® (SL 1)
BLAZEFRAME (SL 1) SLOTTED one SIDEProfile with one slotted leg and one solid leg w/ firestop on slotted side. Composite Firestop Deflection Track System for use in fire rated wall assemblies.…
BlazeFrame® RipTRAK™ Shaftwall
head-of-wall deflection track - 1 & 2 hour systemBlazeFrame RipTRAK Shaftwall is a ceiling runner with an offset shoulder that represents the thickness of the wall material (5/8"…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.