Search
Products
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
Drip Casing
Drip leg directs moisture away from openings and foundation wallsDesigned to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be…
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
Strait-Flex® OS-400
DESIGNED for outside 90° corners where large voids and irregularities occurDiamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.
Paper-Faced Corner Bead
Lowering Labor Costs by removing one coat of compoundPaper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective,…
Paper-Faced Square Nail-On Corner Bead (CD1-UB)
Provides square drywall corners and is used when nailing or mechanical fastening is desiredPaper-faced nail-on beads combine galvanized metal corner and edge protection with high-grade paper to…
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openingsUsed as a backing for perimeter sealant application.
DEFS Muddable J-Bead
Designed to cover the raw edges of drywall boardFor use in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Wide Flange Corner Bead
Wide Flange Corner reinforcementWide Flange Corner Bead is designed for deep fills, irregular corners, and for use in conditions, requiring two layers of 5/8" drywall.
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Extra Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.