Search
Products
Hanger Wire & Tie Wire
Hanger Wire & Tie Wire
Wire support for drop ceiling assemblies
BlazeFrame® Shield
33mil, 43mil or 54mil Fire Shield System
ClarkDietrich’s BlazeFrame Shield is specifically designed for use in conjunction with approved fireblocking materials per section 718 of the IBC.
Mini-Bead™ 800 and 900
Provides superior keying for joint compound for one-coat plaster veneer systemsMini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat…
Grommets
Grommets for Steel Wall Stud Framing
Grommets protect and isolate electrical wiring and plumbing from contacting metal.
Metal Furring Channel Clips (MFCC)
Quickly facilitates the attachment of metal furring channel to 1-1/2" U-channel in ceiling assemblies
Metal Furring Channel Clips are made of galvanized wire and used to attach Metal Furring…
Custom Fabricated Clips & Connectors
Custom connectors, clips or supports fabricated to your exact specifications
ClarkDietrich can custom fabricate just about any shape, bend, angle or specialty framing clip, connector or support to…
Gusset Plates (G-Series & GP-Series)
Punched Or Unpunched Gusset Plates
Gusset plates for easier and faster attachments of X-Bracing or roof framing
Universal Header Hanger (H-Series)
used to connect box headers to jambs or beams to columns
The H-Series™ Universal Header Hanger is used to connect box headers to jambs or beams to columns and transfer large vertical loads.
Aluminum Burn Clip (AB)
Clips melt away under intense heat, allowing a fire-damaged structure to collapse, while keeping the firewall barrier in place to protect the adjacent units
The clips are used to hold the area…
E-Screen (Drainage Mat)
Rainscreen Drainage MatClarkDietrich E-Screen can be used in stucco, stone veneer, brick, or under various siding installations to provide an effective method for drainage and ventilation in the wall…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Panel Lift Clip (PLC)
PROVIDES LIFTING POINTS FOR PREFABRICATED PANELS
The ClarkDietrich Panel Lift Clip is load rated and is used to safely lift wall panels at assembly warehouses or on job-sites. The…
Universal Bypass Clips (UBC)
Provides either a rigid connection OR vertical building movement up to 3”.
Universal Bypass Clips are used to attach exterior curtain wall studs to the building structure and provide either a rigid…
Cornerite™
Reinforcement for inside or outside cornersCornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from…
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…
360TRAK™
Interior Nonload-Bearing Flexible Track360TRAK™ is a flexible framing product that is a high-performance solution for creating intricate curves, bends, and variable radii for dramatic and…
Connector Clips (for Control Joints)
Designed to assist in the alignment of control joints
And to provide a base for caulking.
Straight and Mitered Connector Clips (for Soffit Vents)
Assists in the alignment of soffit vents
Connects multiple sections.
Connector Clips (for Channel Reveals)
Designed to be used with channel reveals as a base for sealants
And to assist in alignment.
DS15 Drip
Used with drip screed and as drip in special conditions
Such as soffits, balconies, etc.
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
ClarkDietrich Sound Clip™ (CDSC)
Sound isolation and dampening clipUsed to fasten gypsum wallboard in various wall and floor to ceiling applications, while simultaneously providing acoustical separation.
Fixed Universal Slip Clip (FUS)
10 and 12 Gauge FIXED universal slip clipIdeal for medium to larger standoff conditions.
Colored Vinyl
Color LeadershipIn addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
MEP Gusset Plate
ReSTORES structural integrity of steel framing with field modified openingsThe MEP Gusset Plate is designed to provide strength and stiffness to framing members that are modified or field cut at the…
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standardsMiter cuts are made with precision to ensure proper fit at all connections.