Search
Products
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
F-Bead
Covers raw edges of drywallDesigned to cover raw edges of drywall and provide a 1/2" horizontal extension.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Strait-Flex® Tuff-Tape
Designed for strength and speed and as a paper tape replacement
Used in areas where humidity causes paper tape to fail.
Strait-Flex® Crack-Tape
Repairs persistant cracks in corners and on flat surfaces
Tested to be two times stronger than paper or mesh tapes.
Strait-Flex® Tile-Tape®
Designed for tile, marble and granite and water and mold resistant
Produces straight, strong, and water-proof inside, outside and off-angle corners.
Strait-Flex® Butt-Tape
Designed for fast, flat, butt-jointsVertical and horizontal butt-joints and commercial “Top-Out” applications.
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Rip-Bead® Flat L-Bead
Cover raw edges of drywallDesigned for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
Partition End Caps
Quickly finishes doorways, knee walls and wall endsFinish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
Light and Medium Framing Angle
Light and Medium Framing AngleCDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints).
Gusset Clips
GUSSET CLIPSA one-piece design provides 3-way connection (top-bottom-side) for a variety of applications.
"L" and "T" Strap Ties
"l" and "T" strap tiesEconomical braces are ideal for gates, patio covers, joining posts and columns to headers, beams and other applications where added reinforcement is needed.
Medium Clip Angle
Medium clip angle12 gauge angles used to attach back-to-back installation.
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Framing Angles
light and medium framing anglesCDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints).
Mending Tie Plate
MENDING TIE PLATESVersatile and easy-to-use mending plates for wood-to-wood connections.
Nail Stop Plates
nail stop PLATESDesigned to prevent nails from piercing and damaging mechanical, electrical and plumbing pipes and lines.
Steel Plywood/Sheathing Clip
steel plywood / sheathing clipFast and easy - just slip over the sheathing edge. Eliminates unreliable wood blocking.
Twist Straps (CDLST Series)
TWIST STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Tie Plate Anchor Series (CDTPA)
TIE PLATE ANCHOR SERIESThe CDTPA Anchor Series is manufactured to resist uplift of the top plate(s) of solid sawn or structural composite lumber wall members from solid sawn or structural composite…
Nail Plates
nail PLATESNail Plates are used for attaching wooden members together in a non-structural connection.
Light Straps (CDLS Series)
Light STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Medium Straps (CDLMS Series)
Medium STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Straps (CDMS Series)
STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Rolled Straps
rolled STRAPSManufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.