Search
Products
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Grommets
Grommets for Steel Wall Stud Framing
Grommets protect and isolate electrical wiring and plumbing from contacting metal.
Furring Channel / Hat Channel
Furring Channel for Walls and Ceilings
Economical hat-shaped framing component used to “furr” out ceilings and masonry walls.
Z-Furring Channel
Furring Channel for Walls and Ceilings
Easily accommodates rigid insulation and provides for the attachment of gypsum wallboard, veneer or plaster to the interior of masonry walls.
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trusses
Katz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
L-Angle / Corner Angle
L-angle / corner angle
Non-structural corner angles commonly used to connect, reinforce or secure metal stud framing in various drywall applications.
Structural L-Angle commonly used for connection…
U-Channel (CRC)
Traditional cold-rolled Channel (CRC) for bridging
ClarkDietrich U-Channel or Cold Rolled Channel (CRC) are one of the most common bridging methods used to provide resistance to stud rotation and…
BlazeFrame Flute Cover (FC)
Flute cover (Fc) profile cover for under fluted decks
Corrugated strap for horizontal use to span fluted areas of unprotected or protected metal decks in up to 2 hr rated assemblies.
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
Starter Strip / Casing Bead
Heavy-duty, base support starter strips and perimeter casing beads
For Exterior Insulation Finish Systems (EIFS), the perforated flanges allow the base coat mixture to easily flow through and bond…
CI Weep Track
Directs water drainage
Designed to be used with #1 Corner Bead around windows and doors and at the foundation line.
DEFS Starter Strip / Casing Bead
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead. Two rows of large perforations…
DEFS Starter Strip with Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead with weep holes to direct…
DEFS Starter Strip / Casing Bead with Drip
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS) The drip leg assists in moving moisture away from the opening or the foundation walls.
DEFS Starter Strip with Drip and Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
The drip leg assists in directing moisture away from the opening or the foundation walls.
Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side
Designed with weep holes on the front side to move moisture away from openings in…
Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back side
Designed with weep holes on the back side to move moisture away from openings in Exterior…
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior…
Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip leg
Designed with weep holes on the front side and a drip leg to move moisture…
Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legs
Sloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture…
Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing bead
For use in Exterior Insulation and Finish Systems (EIFS).
Weeped Starter Track
One-piece support starter track designed with weep holes and an extended drip leg
Moves moisture away from opening headers in Exterior Insulation Finish Systems (EIFS).
Header Weeped Starter Track
Designed with front weep holes and a drip leg to move moisture away from opening headers
Supplied with a disposable protective strip to prevent clogging during base coat application.
Drip Casing
Drip leg directs moisture away from openings and foundation walls
Designed to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May…
#36 Sill Screed
Exterior Foundation sill screed
A variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation line
To assist with moving moisture away from the wall.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
360TRAK™
Interior Nonload-Bearing Flexible Track360TRAK™ is a flexible framing product that is a high-performance solution for creating intricate curves, bends, and variable radii for dramatic and…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
Structural Studs
ClarkDietrich Cold-Formed Steel C-Studs (C-Series™)Cold-Formed / Light-Gauge C-shaped framing members for axial load-bearing walls, curtain walls, tall interior partitions, floor joists and roof…
TRAKLOC® Drywall Framing System
Telescopes in length to deal with variances during installationTRAKLOC® allows you to order one length member and “adjust” the length accordingly to make up for variances in the slab. The two-piece…
Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizesPerimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been engineered…
Pony Wall
Partial wall framing connection to floorThe ClarkDietrich Pony Wall is intended to support out-of-plane loading of cantilevered partial wall systems that are unsupported at the top track.
ProSTUD® Drywall Framing System
Steel Drywall Studs with smart edge™ technologyProSTUD Drywall Framing System (ProSTUD® and ProTRAK®) with Smart Edge™ Technology is the innovative steel drywall stud that sets a new industry…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined