Search
Products
Quicksilver™ Corner Bead (CBS)
Hot-Dipped METAL CORNER BEAD
Quicksilver™ corner bead is used to achieve outside 90° corners at an economical price point.
Splayed Corner Bead (CB12)
Superior finish and reinforcement for off-angle drywall corners
120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
Clinch-On Dull Corner Bead (CBCO)
Premier drywall finishing bead
Clinch-On Corner Bead is recognized as the premier product for providing sturdy metal reinforcement on 90° drywall corners.
Clinch-On Hot-Dipped Corner Bead (CBCS)
Hot-dipped steel reinforcement for long-lasting, corrosion-resistant drywall corner protection
Hot-dipped corner bead provided by Clinch-On Products, Co. offers the identical roll-formed precision…
Paper-Faced Corner Bead
Lowering Labor Costs by removing one coat of compound
Paper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective,…
Strait-Flex® OS-300
DESIGNED FOR SQUARE, LOW-FILL OUTSIDE 90° CORNERSDiamond-punched paper edging allows for easier feathering, faster drying, and high bonding strength, which assures even lay-down of the paper,…
Strait-Flex® OS-400
DESIGNED for outside 90° corners where large voids and irregularities occurDiamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.
PRO-90 Jumbo Corner Bead
Straight, rust-proof, dent-resistant corners where a wider flange is needed.
Designed with extra wide, 1-3/4" flanges to cover two layers of 5/8" drywall.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control joint
Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
"F" Series Control Joint and Vent
Designed to work on narrow overhangs
Where vents are needed to go against fascia or walls.
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco
May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applications
Available with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areas
One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board.…
Adjustable Inside Corner Trim
Inside Corner Trim
Adjustable inside corner hinge with shoulders designed to keep the corner straight during installation.
PRO-90 Combi Bead
Straight to curve arches
Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.
Zinc Mini-Bead™ 800 and 900
Corner reinforcementZinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges…
3/4" Bullnose Transition Cap
Used to transition 3/4" radius bullnose corner bead to a 90° square corner for installing baseboard or crown molding
Bullnose to 90° transition caps simplify installation of baseboard or crown…
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
Metal U-Trim #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is required
U-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
Soffit Vents (One-Piece)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit Vent
For stucco and plaster with vertical edge clips provided for special installations.
FCS Soffit Vent
Available in several grounds and widths
Can be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersection
When a drip and soffit vent need to be combined.
103 Deluxe® Corner Bead (CBU)
Dull-Finish Metal Corner BeadClarkDietrich 103 Deluxe® corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is…
PRO-90 Corner Bead
Impact-resistant vinyl corner reinforcementPRO-90 Corner Bead is an extra rigid vinyl corner bead designed for stiffness and strength. A slight radius on the nose makes for easy, smooth finishing.
PRO-90 Archway
Used to finish arches, curvatures and most radius conditionsPRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius…
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
West Coast Corner Bead (DWCB)
West coast Corner BeadClarkDietrich west coast corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is nailed,…
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.