Metal U-Trim #200-A (M20A)

Used in conjunction with joint compound when a clean, finished edge is required

U-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and window openings and when wallboard abuts dissimilar surfaces, such as suspended ceilings, beams, plaster, masonry and concrete.

Found In:
Interior Finishing > Commercial Beads
Application(s): Drywall
Description

U-Trim is easily installed by sliding trim over the edge of the board and nailing or screwing through the knurled (long) flange. Installation is completed with application of joint compound for a smooth ready-to-paint surface.

  • Rugged steel construction
  • Galvanized for corrosion protection
  • Knurled, perforated flange enhances compound adhesion

Material: 0.012 min thickness, G30 galvanized

Product Data & Ordering Information

Product code Width Length Pcs./Ctn.
M20A 1/2" 8' 50
1/2" 10' 50
5/8" 8' 50
5/8" 10' 50
Tools: Code & SDS Architectural Specs AIA / CEU
Resources

ASTM & Code Standards:

 

Storage:

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
M20A Metal U-Trim #200-A

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.