Search
Products
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Splayed Corner Bead (CB12)
Superior finish and reinforcement for off-angle drywall corners
120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboard
Metal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings…
Paper-Faced Inside Splayed Corner Bead
Used to create a sharp, crisp line for finishing inside off-angle or inverted splayed corners
Off-angle tape-on 120/135° inside or reverse splayed bead is used to achieve a crisp, clean, straight…
Strait-Flex® Medium
Finishes INSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Medium is a high-performance drywall corner bead.
Strait-Flex® Gold
High-Performance Drywall Corner BeadStrait-Flex Gold is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openings
Used as a backing for perimeter sealant application.
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
Rip-Bead® Flat L-Bead
Cover raw edges of drywall
Designed for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.
Strait-Flex® Perfect-90°™
Finishes inside 90° and off-angle corners
Perfect-90º™ ensures a clean, sharp corner without the risk of damage from a taping knife.
Strait-Flex® L-Bead
Designed to finish edges of drywall
Ideal for window returns, sky lights and wall edges.
Strait-Flex® Wet-Flex
Designed AS A WATER-ACTIVATED OUTSIDE 90° AND OUTSIDE OFF-ANGLE CORNER BEAD ON A ROLL
Water-activated adhesive on inside of roll.
Strait-Flex® Tuff-Tape
Designed for strength and speed and as a paper tape replacement
Used in areas where humidity causes paper tape to fail.
Strait-Flex® Crack-Tape
Repairs persistant cracks in corners and on flat surfaces
Tested to be two times stronger than paper or mesh tapes.
Strait-Flex® Tile-Tape®
Designed for tile, marble and granite and water and mold resistant
Produces straight, strong, and water-proof inside, outside and off-angle corners.
#36 Sill Screed
Exterior Foundation sill screed
A variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
L-Bead
Provides clean, sharp edge at wallboard terminations
L-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
Strait-Flex® Original
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Original is a versatile, multi-purpose drywall corner bead available in 100 ft. rolls.
Strait-Flex® Mid-Flex
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERSStrait-Flex Mid-Flex is a muddable, paper-faced composite, flexible corner bead that adjusts to any angle to create perfect inside and outside 90…
Strait-Flex Wide-Flex
FINISHES INSIDE AND outside 90° AND OFF-ANGLE CORNERSStrait-Flex Wide-Flex is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.